|◀ 1405 - 1416 of 1642 ▶|
View:
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS121HMA0A00A

  • Item#:
    CAS121HMA0A00A
    Manufacturer Item:
    CAS121HMA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS091LGA0A00A

  • Item#:
    CAS091LGA0A00A
    Manufacturer Item:
    CAS091LGA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS183HTA0A00A

  • Item#:
    CAS183HTA0A00A
    Manufacturer Item:
    CAS183HTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS181LAA0A0AA

  • Item#:
    CAS181LAA0A0AA
    Manufacturer Item:
    CAS181LAA0A0AA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS183LTA0A00A

  • Item#:
    CAS183LTA0A00A
    Manufacturer Item:
    CAS183LTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS121LMA0A00A

  • Item#:
    CAS121LMA0A00A
    Manufacturer Item:
    CAS121LMA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS181HAA0A00A

  • Item#:
    CAS181HAA0A00A
    Manufacturer Item:
    CAS181HAA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

    International Comfort Products CHS121LGA0A00A

  • Item#:
    CHS121LGA0A00A
    Manufacturer Item:
    CHS121LGA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

    International Comfort Products CHS091LMA0A00A

  • Item#:
    CHS091LMA0A00A
    Manufacturer Item:
    CHS091LMA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor Protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

    International Comfort Products CHS121HGA0A00A

  • Item#:
    CHS121HGA0A00A
    Manufacturer Item:
    CHS121HGA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Environmentally balanced R-410A refrigeran
  • Liquid refrigerant filter driers
  • Copper tube/aluminum fin condenser and evaporator coils
  • EASY TO INSTALL AND SERVICE
  • Light weight, compact construction ideal for manufactured housing and residential applications
  • Hand holds built into the unit base pan
  • Compact, fully self-contained, electric cooling unit with horizontal supply and return ducts
  • Easy panel accessibility for maintenance and installation
  • Accessory electric heaters with single point connections
  • Designed to be serviced from both the side and front
  • Cabinet air leakage less than 2.0% at 1.0 inch W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C., when tested in accordance with ASHRAE Standard 193

    International Comfort Products PHJ460000K000K

  • Item#:
    PHJ460000K000K
    Manufacturer Item:
    PHJ460000K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Efficient single-stage scroll compressor
  • Efficient multi-speed ECM blower motor
  • Single-stage gas valve
  • Corrosion-resistant Stainless Steel heat exchanger
  • Reliable, direct spark gas ignition
  • System protecting high and low-pressure switches
  • Dense wire hail guard grille and raised coil design for protection against weather and debris
  • Corrosion-resistant aluminum coil design
  • Sound reducing features: vibration-reducing top panel, soft mounted compressor and blower motor
  • Compatible thermostat: heat/cool with humidity sensing
  • Rooftop or ground level installation
  • Cooling capacity: 25 tons
  • Heating capacity: 40,000130,000 BTU

    International Comfort Products PGD436090K000K

  • Item#:
    PGD436090K000K
    Manufacturer Item:
    PGD436090K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 1405 - 1416 of 1642 ▶|
    View: