Brand Name
Tool Type
View:
Aprilaire 56 Automatic Digital Humidifier Control, 10 - 50% Relative Humidity, Beige
  • Designed for low voltage (24 volt) humidifier control
  • Advanced computer technology measures the outdoor temperature and indoor humidity and continually adjusts your homes indoor humidity to its optimum level
  • Outdoor temperature sensor is located outside and is connected to the humidistat with regular 2-conductor thermostat wire Terminal strip wire connection
  • 4-9/16" x 2-13/16" hole size
  • Includes outdoor temperature sensor with 36" wire and bracket, manual mode resistor
Sid Harvey Item #:56AA: Replaces Part #:'s : 2379

INTERNATIONAL COMFORT PRODUCTS N4A324AKG

Item#:
N4A324AKG
Manufacturer Item:
N4A324AKG
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY BALANCED R410A REFRIGERANT
  • 11/2 THRU 5 TONS SPLIT SYSTEM
  • 208/230 Volt, 1phase, 60 Hz
  • REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • FilterDrier supplied with every unit for field installation
  • Copper tube / aluminum fin coil
  • EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 2 (51mm) spacing standard, alternate models available with 3/8 (10mm) grille spacing for extra protection (hail guard)
Item#:
N4A342AKN
Manufacturer Item:
N4A342AKN
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
EFFICIENT 13 SEER AIR CONDITIONER ENVIRONMENTALLY BALANCED R410A REFRIGERANT
  • 11/2 THRU 5 TONS SPLIT SYSTEM
  • 208/230 Volt, 1phase, 60 Hz
  • REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • FilterDrier supplied with every unit for field installation
  • Copper tube / aluminum fin coil
  • EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 2 (51mm) spacing standard, alternate models available with 3/8 (10mm) grille spacing for extra protection (hail guard)
Item#:
N4A348AKG
Manufacturer Item:
N4A348AKG
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Aprilaire 5531 Inlet Fill Valve 800/801/225

INTERNATIONAL COMFORT PRODUCTS N4A318AKF

Item#:
N4A318AKF
Manufacturer Item:
N4A318AKF
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
The forged steel jaws of these left-cutting or right -cutting snips are set at a 90-degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. A serrated edge on the upper jaw and compound head-to-handle linkage provide powerful, non-slip leverage for cutting up to 24-gauge (0.61 mm) cold rolled steel or 28-gauge (0.38 mm) stainless. Handles feature non-slip, cushion inserts, torsion-spring action and a squeeze-open, side operated latch. Rust-resistant polished forged steel jaws and black oxide finished handle stampings promote long service life.
Item#:
AV8
Manufacturer Item:
AV8
Manufacturer:
MALCO PRODUCTS, INC.
Hilmor 1891186 Pipe Crimper 3 Blade Sometimes your best work isnt supposed to be seen. Our Crimping Tools come standard with contoured rubber grips that fit nicely in your hand while you make male-ends in round duct. Because the better the crimp, the tighter the seal.
Item#:
1891186
Manufacturer Item:
1891186
Manufacturer:
HILMOR
Duro Dyne Off-Set Metal Snips
Item#:
M-7R
Manufacturer:
DURO DYNE CORP
Aprilaire 6726 Damper Bottom Mount 8" x 18"

International Comfort Products N4A360GHC

Item#:
N4A360GHC
Manufacturer Item:
N4A360GHC
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Malcos Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options.
  • These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design.
  • All of Malcos Max2000 Aviation Snips feature superior hardened blade edges for maximum cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! And an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.
  • Standard Left, Right and Combination Cutting Aviation Snips have wide-opening jaws with a serrated lower blade for fast controlled cuts in vinyl plastics, layered metals and seams. Precisely ground blade tips also cut into tight spaces and flush to 90° walls.
Item#:
M2003
Manufacturer Item:
M2003
Manufacturer:
MALCO PRODUCTS, INC.
Aprilaire O-Ring Gasket 800/801/865

International Comfort Products HVA936GKA

Item#:
HVA936GKA
Manufacturer Item:
HVA936GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Aprilaire 5467 Dehumidifier Model 1850 Replacement Motor Assembly

INTERNATIONAL COMFORT PRODUCTS HVA948GKA

Item#:
HVA948GKA
Manufacturer Item:
HVA948GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Aprilaire 60 Automatic Digital Humidifier Control, 10 - 45% Relative Humidity, Beige
  • Digital readout on the control displays the RH level inside the cold air return
  • Shows that the humidifier is operating
  • Allows you to check relative humidity level
  • New lighted display includes indoor relative humidity readout, service indicator light, water panel change light and"on" indicator light
  • 3/4" rounded hole size
  • Terminal strip wire connection
  • Includes outdoor temperature sensor, manual mode resistor

International Comfort Products N4A348GHB

Item#:
N4A348GHB
Manufacturer Item:
N4A348GHB
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
View: