Brand Name
Type
Diameter
Measuring Range
Connection Size
View:
Granby 204203 Steel Residential Oil Tank, 275 Gallon

Scully Signal 4504

Item#:
4504
Manufacturer Item:
14504
Manufacturer:
R.W. BECKETT CORP
Browning 1VL25X1/2 Sheave 1-Groove Cast Iron Variable Pitch 2-1/2" X 1/2"

Sid Harvey B136-5

Item#:
B136-5
Manufacturer Item:
B136-5
Manufacturer:
MITCO MFG.
Yellow Jacket 41080 Replacement Handles 41 Series Gauges
Item#:
41080
Manufacturer Item:
41080
Manufacturer:
RITCHIE ENGINEERING CO INC
Boyertown Parts Blower Pulley LB160 6" x 3/4"

Sid Harvey B136-3

Item#:
B136-3
Manufacturer Item:
B136-3
Manufacturer:
MITCO MFG.
Sid Harvey P125-2L Liquid Pump Test Gauge Diameter 0-300 psi Bottom Mounting
Item#:
P125-2L
Manufacturer Item:
P125-2L
Manufacturer:
MITCO MFG.
Sid Harvey P125-2 Pump Test Gauge Diameter 0-300 psi Bottom Mounting
Item#:
P125-2
Manufacturer Item:
P125-2
Manufacturer:
MITCO MFG.
Sid Harvey P126 Vacuum Pump Test Gauge Diameter 0-30" hg Bottom Mounting
Item#:
P126
Manufacturer Item:
P126
Manufacturer:
MITCO MFG.
Mitco B136-8 Water Pressure Test Gauge, 2-1/2" Dial, 3/4" Female
Item#:
B136-8
Manufacturer Item:
B136-8
Manufacturer:
MITCO MFG.
Beckett Parts Gauge Vacuum 5/8" x 10 STD
Item#:
H1-10
Manufacturer Item:
H1-10
Manufacturer:
R.W. BECKETT CORP
Lau Industries Blower Wheel 17" H x 14-15/16" W x 9-3/8" D

Sid Harvey B136-1

Item#:
B136-1
Manufacturer Item:
B136-1
Manufacturer:
MITCO MFG.
Uniweld TGB230 Steel/Aluminum Case Gas Test Gauge, 2" Dial, 1/2"
Item#:
TGB230
Manufacturer Item:
TGB230
Manufacturer:
UNIWELD PRODUCTS, INC.
Roth DWT 1500L Galvanized Cold Rolled Sheet Steel Double Wall Oil Tank, 400 Gallon
  • The Roth double wall safety fuel oil storage tank (DWT) is made with a seamless blow-molded polyethylene inner tank and a 19 ga Galvanized outer tank
  • The outer tank is formed by joining cold rolled sheet steel, used to form the sides and bottom from a 1-piece, with 2-stamped metal end pieces
  • The edges between the sides and ends have sealant applied to them and are then rolled to create leak-proof seams
  • A stamped top is then pressed and riveted into place to complete the assembly of the DWT
  • The DWT is UL® listed in the United States and Canada under SU2258 and approved under NFPA 31 (2001) and CSA B-139-04 as non-metallic fuel oil storage tanks
  • Both inner and outer tanks are pressure tested at the factory during assembly according to UL standards and do not require further field testing
  • The DWT also comes with a detached saddle base which the tank is placed on at the time of installation
  • The tank shall be placed into service in accordance with local codes and the listed use (indoor or outdoor) on a flat, level and stable surface, away from heat sources, corrosive atmospheres or fluids, potential mechanical damage or rapid temperature changes
  • The final location must have the tank label visible after installation, a minimum of 2" from all walls or obstructions is recommended for normal tank expansion and visual inspection
  • The integral base support shall not be removed and raising the tank height is not allowed except on a continuous concrete platform at least 6" wider than the tank base at all sides
  • All local fire code set-backs for fuel oil storage tanks must be observed
  • Tanks installed indoors shall not be exposed to direct sunlight on any plastic parts
Sid Harvey Item #:1500L: Replaces Part #:'s : 9K548

Roth 2335003723

Item#:
2335003723
Manufacturer Item:
2335003832
Manufacturer:
OIL TANKS
View: