Brand Name
Cooling BTU
Heating BTU
Voltage
Phase
Refrigerant
SEER

Fujitsu General America’s feature-rich line of year-round cooling and heating residential heat pump units range from 14 to 20 SEER in 1.5 to 5 ton sizes. Scroll compressor technology make these units efficient and durable. Optimized fan orifice contributes to optimal airflow and enhanced mufflers and improved refrigerant tubing create better overall performance. Built-in defrost capabilities. The composite base pan adds to quiet performance and helps eliminate corrosion. The 15” industry-leading corner service access and a roomy diagnostic service window means maintenance calls go quickly. Powder coat paint system provides a lasting professional finish.

 

|◀ 1 - 12 of 127 ▶|
View:
Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Galvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection
Item#:
N4H424GKG
Manufacturer Item:
N4H424GKG
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Scroll compressors on all models
  • Suction line accumulator factory installed
  • Integrated solid state control with TimeTemperature
  • Defrost High and Low pressure switches Copper tube / aluminum fin coil
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • Painted cabinet finish over galvanized steel
  • Coated inlet grille with 3/8 (10mm) spacing standard (hail guard)
  • 5 year compressor limited warranty Use of the AHRI Certified TM Mark indic- ates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts limited warranty (including compressor and coil)
  • For owner occupied, residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications.
Item#:
R4H424GK
Manufacturer Item:
R4H424GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Galvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection
Item#:
N4H430GKG
Manufacturer Item:
N4H430GKG
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Scroll compressors on all models
  • Suction line accumulator factory installed
  • Integrated solid state control with TimeTemperature
  • Defrost High and Low pressure switches Copper tube / aluminum fin coil
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • Painted cabinet finish over galvanized steel
  • Coated inlet grille with 3/8 (10mm) spacing standard (hail guard)
  • 5 year compressor limited warranty Use of the AHRI Certified TM Mark indic- ates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts limited warranty (including compressor and coil)
  • For owner occupied, residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications.
Item#:
R4H436GK
Manufacturer Item:
R4H436GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Galvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection
Item#:
N4H418GKG
Manufacturer Item:
N4H418GKG
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
HIGH EFFICIENCY 15 SEER HEAT PUMP
  • ENVIRONMENTALLY SOUND R410A REFRIGERANT
  • 1½ THRU 5 TONS SPLIT SYSTEM
  • 208 / 230 Volt, 1phase, 60 Hz
  • REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • High and Low pressure switches
  • Copper tube / aluminum fin coil
  • EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
Item#:
NXH530GK
Manufacturer Item:
NXH530GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
HIGH EFFICIENCY 15 SEER HEAT PUMP
  • ENVIRONMENTALLY SOUND R410A REFRIGERANT
  • 1½ THRU 5 TONS SPLIT SYSTEM
  • 208 / 230 Volt, 1phase, 60 Hz
  • REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • High and Low pressure switches
  • Copper tube / aluminum fin coil
  • EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
Item#:
NXH524GK
Manufacturer Item:
NXH524GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
SmartComfort Gray Galvanized Baked-On Powder-Coated Steel Communicating Split System Heat Pump, 24000 BTU/hr, 2 ton, 208 - 230 VAC This heat pump boasts cooling efficiencies of up to 16 SEER and features a 1-stage scroll compressor for electric heating and cooling. Pair it with a compatible gas furnace and thermostat to gain dual fuel heating efficiency in colder climates. You can also enjoy the convenience of remote access and the assurance of best levels of performance and comfort management when you pair it with a complete observer communicating system, including the energy-smart observer communicating wall control with Wi-Fi capability.
Item#:
TSH624GKA
Manufacturer Item:
TSH624GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FO2414RSJNA Heat Pump Condensing Unit 24K BTU 2 Ton, 208/230/1 14 SEER 3/8" x 3/4"
  • Galvanized Powder-Coated Paint Steel Non-Communicating Air Cooled 1-Speed Split System Heat Pump, 24000 BTU, 2 Ton, 208 - 230 VAC
  • New composite base pan - dampens sound, secures wire grille, eliminates corrosion and reduces number of fasteners needed
  • Improved tubing design - reduces vibration and stress, making unit quieter and reducing opportunity for leaks
  • Optimized defrost characteristics - decrease defrosting and provide better home comfort
  • Powder coat paint finish - for a long lasting professional finish
  • Optimized reversing valve sizing - improves shifting performance for quieter unit operation and increased life of the system
  • Enhanced mufflers - help to dissipate vibration energy for quieter unit operation
  • Scroll compressor - a sound abating feature added to the compressor significantly reduces noise when system transitions in and out of defrost mode
  • Modern cabinet aesthetics - increased curb appeal with visually appealing design
  • Curved louver panels - provide ultimate coil protection, enhance cabinet strength and increase cabinet rigidity
  • Optimized fan orifice - optimizes airflow and reduces unit sound
  • Rust resistant screws - confirmed through 1500 hr salt spray testing
  • Service valve has between - 3, 4, 5" valve space provides a minimum working area of 27 sq-inch for easier access
  • Integrated heat pump lift receptacle - allows standard CPVC stands to be inserted into the base
  • 15" wide, industry leading corner service access - makes repairs easier and faster
  • External gauge port access - allows easy connection of"low-loss" gauge ports
  • Single-row condenser coil - makes unit lighter and allows thorough coil cleaning to maintain"out of the box" performance
  • Fewer cabinet fasteners - allow for faster access to internal components and hassle-free panel removal
  • Service trays - hold fasteners or caps during service calls
  • QR code - provides technical information on demand for faster service calls
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire
Item#:
FO2414RSJNA
Manufacturer Item:
FO2414RSJNAA
Manufacturer:
FUJITSU
TempStar SmartComfort TSH636GKA Gray Galvanized Baked-On Powder-Coated Steel Communicating Split System Heat Pump, 36000 BTU/hr, 3 ton, 208 - 230 VAC This heat pump boasts cooling efficiencies of up to 16 SEER and features a 1-stage scroll compressor for electric heating and cooling. Pair it with a compatible gas furnace and thermostat to gain dual fuel heating efficiency in colder climates. You can also enjoy the convenience of remote access and the assurance of best levels of performance and comfort management when you pair it with a complete observer communicating system, including the energy-smart observer communicating wall control with Wi-Fi capability.
  • 1-stage heat pump with observer communicating control system
  • Scroll compressors on all models
  • Suction line accumulator factory installed, bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost, external high and low refrigerant service ports
  • Copper tube/post-painted (black) aluminum fin coil
  • Communicating, self-configuring operation when used with observer wall control (TSTAT0201CW)
  • Outdoor temperature sensor factory installed, compressor sound blanket standard
  • Isolation compressor grommets
  • Text based diagnostics with observer communicating wall control
  • Easy access service valves on all models, innovative control box design
  • High and low pressure switches
  • Only (2) screws to access control panel
  • Factory charged with R-410A refrigerant
  • High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" grille spacing for extra protection
  • Corner posts for extra strength and style
  • 5 years no hassle replacement limited warranty, 5 years limited parts warranty
  • Coil guard grille
  • Sales code This heat pump boasts cooling efficiencies of up to 16 SEER and features a 1-stage scroll compressor for electric heating and cooling. Pair it with a compatible gas furnace and thermostat to gain dual fuel heating efficiency in colder climates. You can also enjoy the convenience of remote access and the assurance of best levels of performance and comfort management when you pair it with a complete observer communicating system, including the energy-smart observer communicating wall control with Wi-Fi capability.
Item#:
TSH636GKA
Manufacturer Item:
TSH636GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Scroll compressors on all models
  • Suction line accumulator factory installed
  • Integrated solid state control with TimeTemperature
  • Defrost High and Low pressure switches Copper tube / aluminum fin coil
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • Painted cabinet finish over galvanized steel
  • Coated inlet grille with 3/8 (10mm) spacing standard (hail guard)
  • 5 year compressor limited warranty Use of the AHRI Certified TM Mark indic- ates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .
  • 5 year parts limited warranty (including compressor and coil)
  • With timely registration, an additional 5 year parts limited warranty (including compressor and coil)
  • For owner occupied, residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications.
Item#:
R4H460GK
Manufacturer Item:
R4H460GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
SmartComfort Gray Galvanized Baked-On Powder-Coated Steel Communicating Split System Heat Pump, 30000 BTU/hr, 2.5 ton, 208 - 230 VAC This heat pump boasts cooling efficiencies of up to 16 SEER and features a 1-stage scroll compressor for electric heating and cooling. Pair it with a compatible gas furnace and thermostat to gain dual fuel heating efficiency in colder climates. You can also enjoy the convenience of remote access and the assurance of best levels of performance and comfort management when you pair it with a complete observer communicating system, including the energy-smart observer communicating wall control with Wi-Fi capability.
Item#:
TSH630GKA
Manufacturer Item:
TSH630GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
|◀ 1 - 12 of 127 ▶|
View: