Highside red epoxy is a new high performance, 2-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red epoxy is specifically designed to exhibit a distinct color change when heat cured.

• No rush, no wait, you control the curing time
• Simple, quick mixing and application
• Turns gold when fully cured
• Works on vertical surfaces
• 10 min of induction time

Sid Harvey Item #:HS12001: Replaces Part #:'s : B81-567,

HS12001

,

HS12001

Clean-Fit Products 3-wrap yellow gas seal tape is a PTFE thread sealing tape designed specifically for gas lines. This is a full or maximum-density thread sealing tape. Mill-Rose 3-wrap yellow gas seal tape is approved by relevant authorities and used by the gas industry world-wide. It's color-coded yellow so fitters and inspectors can easily recognize it as an approved tape.

• Just 3 wraps for leak-proof joints

,

Clean-Fit Products 70820

,

70820

RectorSeal® A/C Leak Freeze 00284 Blue Sealant with Adapter, 1.5 oz,,

RectorSeal 284

,

00284

Spectronics SPE-EZDS-CS A/C Leak Sealant Cartridge

SPE-EZDS-CS

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

13062 All Purpose Pipe Cement 16 oz,

13062

,

13062

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

13061 All Purpose Pipe Cement 8 oz,

13061

,

13061

Silco J14-2 Aluminum Silicone Caulking, 10.3 oz

Sid Harvey Item #:J14-2: Replaces Part #:'s : G89-776,

Silco J14-2

,

J14-2

EasySeal direct inject is a new generation of sealants. Its patent pending injection method makes it easier to install than other sealants. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of a UV light.

• Concentrated formula means less material in system
• Clear tube so you can see the sealant go in
• No need to pump down R-410A units
• No injection hose or caulk gun needed
• 1-time use
• Treats fractional to 1.5 Ton
• Strongest sealant on the market
• Installs in seconds
• Precise formula that creates a permanent seal
• Polymer free
• OEM approved not to clog manifold gauges
• Works with all oils and refrigerants
• Proven not to plug TxVs, cap tubes or pisTons
• New UV dye formula available for detection of larger leaks

,

Nu-Calgon 4050-05

,

4050-05

Clean-Fit Products Blue Monster 76003 Blue Heavy Duty Industrial Grade Blue Monster industrial grade PTFE enriched pipe thread compound is a slow drying, soft setting, non-hardening pipe thread compound. Blue Monster has a high bulk density, which means there are more solids in the formulation. This allows you to work the product into the valley of the threads giving you greater sealing capabilities to fill any voids that occur under different tolerances of pipe and fittings. Blue Monster with PTFE is recommended for on site or assembly line work. It is lead-free, non-toxic and will not harden or separate in the can. When applied properly, Blue Monster allows the system to be pressurized immediately after assembly. It does not require any set or cure time. Blue Monster PTFE pipe thread sealant is formulated with PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials.,

Clean-Fit Products 76003

,

76003

Multi-purpose thread sealant made with DuPont Kevlar for use on metals including steel, stainless steel, brass, copper, aluminum and on plastics including PVC, CPVC and ABS. Leak-free joints can be tested and put into service at once. MeGallonoc wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. MeGallonoc does not harden, crack or become brittle, joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. MeGallonoc is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leak-proof hydraulic resistance to 12000 psi and withstands gas pressure up to 2600 psi. MeGallonoc is non-toxic, non-hazardous and non-flammable. It contains no lead, heavy metals or volatile solvents.

Oatey 15808

Federal Process Gasoila SS02 Blue Green Thread Sealant, 2 oz Tube with Brush Top, 24/Case

Federal Process SS02

All purpose pipe joint and gasket sealing compound for use on metals including aluminum, black iron, brass, copper, stainless steel, Galvanized steel and on plastics including PVC. Grrip sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. Provides leak proof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Joints can be disassembled easily, without damage to pipe or equipment. Grrip can be removed from skin or clothing, tools or equipment with isopropyl alcohol or Hercules for Hands hand cleaners.

Oatey 15520