Brand Name
Material
Type
Diameter
Length
View:
Savaire VOC18H2 Outdoor 1-Zone Ductless Heat Pump System, 18000 BTU Cooling, 20000 BTU Heating, 208 - 230 VAC Savaire systems provide a comfortable environment, operating much quieter than a window unit and more energy efficient than a central heating or cooling system. Sleek wall mounted indoor units connect to an outdoor condenser unit, standard with a base pan heater for low temperature climates. Each system comes packed with standard features.
  • Base pan heater
  • LED display on front panel
  • LED dimmer
  • 5 indoor fan speeds
  • LCD wireless backlit remote control
  • Auto restart
  • Auto defrost
  • Smart function - the unit chooses 1 of 4 run modes depending on room temperature
  • Super mode - in cooling mode, the unit will operate for 15 min at high speed with a set temperature of 60.8 deg F
  • Quiet mode
  • 24 hr timer
  • Louver position memory
  • Horizontal auto swing louver
  • "I feel" setting - uses sensor in remote, not wall unit, ambient temperature sensed at location of handheld remote
  • Removable and washable panel
  • Chassis electric heater function
  • 7 years compressor, 5 years limited parts warranty Savaire systems provide a comfortable environment, operating much quieter than a window unit and more energy efficient than a central heating or cooling system. Sleek wall mounted indoor units connect to an outdoor condenser unit, standard with a base pan heater for low temperature climates. Each system comes packed with standard features.
    • Capacity (Cooling): 18000 BTU
    • Capacity (Heating): 20000 BTU
    • Compressor Type: Rotary
    • Efficiency Rating COP: 10.0 COP
    • Efficiency Rating EER: 10.6 EER
    • Efficiency Rating HSPF: 10.0 HSPF
    • Efficiency Rating SEER: 17.6 SEER
    • Flow Rate (S/H/M/L): 407/345/285/226 cfm
    • Frequency: 60 Hz
    • Max Circuit Breaker: 20 A
    • Number of Phases: Single
    • Rated Current (Cooling / Heating): 7.6 / 9.0 A
    • Refrigerant: R-410A
    • Refrigerant Charge Volume: 1400 g
    • Temperature Range, Cooling: 32 to 115 deg F
    • Temperature Range, Heating: -4 to 75 deg F
    • Voltage: 208/230 V

      Metal-Fab 4M90

Item#:
4M90
Manufacturer Item:
4M90
Manufacturer:
VP SUPPLY CORP
Nortek Global (Parts) 904106 Vent Cap Kit
    Item#:
    904106
    Manufacturer Item:
    904106
    Manufacturer:
    NORTEK GLOBAL (INTERTHERM)
    Nortek Global (Parts) 103947002 Vent Pipe
      Item#:
      103947002
      Manufacturer Item:
      103947002
      Manufacturer:
      NORTEK GLOBAL (INTERTHERM)
      Metal-Fab is committed to being an innovative leader in an industry that demands quality, excellence, and safety. Manufacturing superior venting products since 1959, we take pride in our continuous efforts to provide new and improved, highly efficient products to our customers. Introducing the new and improved Type-B High Performance Gas Vent Cap. The next generation of venting products has arrived. Metal-Fabs Type-B gas vent cap is UL441 listed and manufactured in the U.S.A. with superior venting technology to give your customers the confidence they have the best. The new low-profile design reduces the vent cap footprint and provides greater wind and water protection, eliminating rain leaks while minimizing the potential for downdrafts. Metal-Fab Type-B Gas Vent Caps are manufactured from the highest quality materials, helping to increase product function and efficiency, creating a product that lasts a lifetime.
      • 1" minimum clearance to combustibles
      • SureLock locking system creates secure connections without tools
      • Made in USA
      Item#:
      5MCHP
      Manufacturer Item:
      5MCHP
      Manufacturer:
      METAL-FAB INC
      Z-Flex 2OILKTx0535 stainless steel chimney liner kits everything you need to get the job done right Z-Flex stainless steel chimney liner kits come complete with everything you need to quickly and easily install a professional venting system. Manufactured from special high temperature and acid resistant stainless steel exclusive to Z-Flex and designed with 'deep corrugations' to provide for greater flexibility and ease of installation. The result is a clearly superior product, offering incredible longevity.
      • For use with Category II, III, or IV gas burning appliances as defined by the national fuel gas code, NFPA 54, or other appliances that result in condensation or corrosive acids on the liner of the chimney, or that create positive pressures in the chimney system
      Item#:
      2OILKTX0535
      Manufacturer Item:
      2OILKTX0535
      Manufacturer:
      Z-FLEX US INC
      Hart & Cooley Aluminum Inner and 0.018" G90 Gallonvanized Steel Outer Round
      • Corrosion resistant aluminum inner wall for rapid warm-up
      • Unique locking band provides 360 deg turning radius of the pipe and fittings
      • Locking band slides over tabs easily, locks firmly without twisting
      • Locking tabs hold pipe securely together, can be easily unlocked
      • Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
      • Reinforced ends curled bead on end of outer pipe for rigidity and strength
      • The allowable minimum clearance to combustibles is 1"
      • A full set of installation instructions are supplied with caps and supports


      Item#:
      8TLC36
      Manufacturer Item:
      502131
      Manufacturer:
      HART & COOLEY, LLC.
      Hart & Cooley 6TLC48 0.016" 304 Stainless Steel Inner and 0.015" 304 Stainless Steel Outer Wall All Fuel Type Non-HT Chimney Length with Locking Band, 6" Diameter x 48"
      • Slim, advanced design allows for installation between 16" centers and still provides 2" clearance from combustible material
      • Secure twist-lock design couples chimney sections together with just a 1/8 turn and locking bands secure joints
      • Extremely corrosion resistant
      • Embossed couplers do not allow moisture to penetrate the chimney's outer wall
      • Black trims are used to embellish the chimney support component parts that may be installed inside the home
      • The 1" space between the inner or outer walls is packed with mineral wool fiber insulation to provide superior insulating qualities in a slim-line design
      • The outside diameter is 2" larger than the inside diameter
      • The chimney must extend at least 3 feet above the highest point where it passes through the roof surface and at least 2 feet higher than any part of the building within a horizontal distance of 10 feet
      • Lifetime warranty
      • Model TLC all-fuel chimney offers current technology in factory-built chimney design by providing superior performance, durability and safety
      Item#:
      6TLC48
      Manufacturer Item:
      502049
      Manufacturer:
      HART & COOLEY, LLC.
      Fujitsu Halcyon AOU9RLS3H Beige Galvanized Steel Condenser Enclosure 1-Zone Reverse Cycle Inverter Driven Wall Mount Outdoor Ductless Mini-Split Heat Pump, 9000 BTU Cooling, 12000 BTU Heating, 208 - 230 VAC
      • Super efficient
      • High heating
      • Apple catechin filter
      • Ion deodorizing filter
      • Sleep timer
      • 24 hr timer control
      • Weekly timer
      • Dry mode
      • 4-way auto louver
      • Auto fan mode
      • Powerful operation
      • Economymode
      • Energy saving program
      • Quiet mode (indoor unit)
      • Outdoor unit low noise
      • Auto restart/reset
      • Auto changeover
      • Low ambient cooling
      • Cold prevention
      • Base pan heater
      • 7 years compressor, 5 years parts warranty

      Sid Harvey K5N525

      Item#:
      K5N525
      Manufacturer Item:
      K5N525
      Manufacturer:
      SMOKE PIPE & SHEET METAL
      Crown Boiler Parts Oil Burner Assembly Beckett AFG TWB/KSB 125/150

      Bramec 7090

      Item#:
      7090
      Manufacturer Item:
      7090
      Manufacturer:
      BRAMEC CORP
      Olympia Chimney SSSB13x13 Stainless Steel Single Flue Chimney Cap, 13" x 13"
      Item#:
      SSSB13X13
      Manufacturer Item:
      SSSB13X13
      Manufacturer:
      SMOKE PIPE & SHEET METAL
      Francer Industries THIMBLE824 Thimble
      • 8" x 24 Gauge
      Item#:
      THIMBLE826
      Manufacturer Item:
      THIMBLE824
      Manufacturer:
      FRANCER INDUSTRIES, INC.
      Cam-Stat L597BA Fan and Limit Control with Time Delay & Shield

      Bramec 5070

      Item#:
      5070
      Manufacturer Item:
      5070
      Manufacturer:
      BRAMEC CORP
      View: