Brand Name
Type
BTU Output
Fuel Type
View:
TWIN-FLO III heaters are for use with forced hot water residential heating systems and consist of a copper tube, aluminum finned heating element, with an electric motor and blower of unique cross flow design. Their purpose is to deliver a comfortable stream of warmed air, at or near floor level, and their construction is extremely compact so minimum space is required for installation.
  • Kickspace heaters are the space-saving alternative to hot water baseboard
  • The type K heater is primarily used in horizontal floor installation, for example under a kitchen counter cabinet or bathroom sink enclosure
  • They are ideal for radiant systems with the use of a low temperature aquastat designed to turn the unit on at 11 deg F
  • Type W is for vertical mounting, fully recessed in the wall studs, with the air discharged upward through a flush mounted, louvered front panel
  • Type F is a surface mounted wall unit, with the air discharged evenly through a louvered front panel in an upward direction
  • All types have heating elements with 1/2 Inch nominal (5/8 Inch outside diameter) copper tube connections and 115 volt
  • Electric blower motor, interwired with a 12 deg F (49 deg C) reverse acting aquastat that prevents operation until hot water is circulating
  • These units are not intended to be used on one or two pipe steam systems
  • For gravity fed systems, it is recommended that a separate circulator pump be installed for the kickspace heater
  • Designed to fit inconspicuously under a cabinet, in the floor, on or in the wall
  • Hot water from the home's boiler is circulated through the kickspace unit and the fan gently blows heated air into the room
  • The homeowner simply selects the fan speed, then the unit turns on and off automatically according to heating demand
  • 53 cfm high speed
  • 32 rpm
  • .34 hp motor
Sid Harvey Item #:K42: Replaces Part #:'s : 3935
Item#:
K42
Manufacturer Item:
K42
Manufacturer:
MOTION&FLOW PROD.,TMS INC.
Turbonics Toester T45-HA Hydronic Under-Cabinet 4/5 Kickspace Fan Coil Heater, 5700 BTU/hr Output at 180 deg F
  • Turbonics Toester 4/5 is a space saving alternative to hot water baseboard
  • Designed to fit inconspicuously under a cabinet in the floor or in the wall
  • The Toesters fan motor is a 4-pole shaded 2-speed 110 volt 60 Hz UL approved motor
  • The heat exchanger of the Turbonics 4/5 Toester kickspace heater is copper tube type with 7 aluminum fin/Inch
  • The control is a wall mountable 2-speed on and off fan switch
  • A clip-on bi-metal snap disc heat sensing aquastat turns the fan on and off automatically
  • Black or brushed stainless finish grille front
  • Low profile
  • Standard 1/2 Inch sweat connections
  • Application flexibility in confined spaces
  • High efficiency copper/aluminum heat exchanger
  • Easily accessed electrical components
  • Factory wired reverse acting aquastat
  • Ultra-low profile fan coil draws air from a 360 deg radius and operates at either 650 or 850 rpm using the Purr-Fect air wheel for optimum balance and performance
  • 5 years limited warranty
Item#:
T45-HA
Manufacturer Item:
T45-HA
Manufacturer:
TURBONICS
View: