Taco 007 Circulator Pump, 1/25 HP, 115 VAC , 23 gpm

• Standard high capacity output and compact design
• Quiet, efficient operation
• Direct drive, low power consumption
• Unique replaceable cartridge design-field serviceable
• Self lubricating, no mechanical seal
• Unmatched reliability, maintenance free
• Universal flange to flange dimensions and orientation allows the 0014 to easily replace other models
• Cartridge style, maintenance free, wet-rotor, in-line and single stage circulator pump
• Unique replaceable cartridge contains all of the moving parts and allows the circulator to be easily serviced instead of replacing the entire unit
• With integral flow check (IFC)
• For indoor use only

Sid Harvey Item #:B53-16: Replaces Part #:'s : 21351

taco b53-16

The 007-IFC features a removable integral flow check designed to improve pump performance, simplify piping and reduce installation costs. The spring-loaded IFC replaces a separate in-line flow check to ensure protection against reverse flow and gravity flow.

• Integral Flow Check (IFC) simplifies piping, prevents reverse flow and gravity flow
• Eliminates separate in-line flow check
• Reduces installed costs
• Improves system performance
• Easy to service
• Unique replaceable cartridge design - field serviceable
• Unmatched reliability, maintenance free
• Quiet, efficient operation
• Self-lubricating, no mechanical seal
• Flanged connections

Sid Harvey Item #:007-IFC: Replaces Part #:'s : 5W300V

taco 007-ifc

Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.

• ECM performance equivalent to the legendary 007 circulator
• High-efficiency ECM motor uses up to 85% less electricity
• Bio Barrier protects pump from system contaminants
• SureStart automatically frees locked rotor condition and self-purges air from pump
• Integral Flow Check (IFC) included
• Dual electrical knockouts, 6" stranded wire leads included for easy wiring
• Use with a Taco ZVC zone valve control or SR switching relay for on/off operation
• Optional 2-way flange model reduces SKU's and provides universal fit-up to any flange position
• Double insulated, no ground wire required
• Whisper quiet operation
• Composite stator housing cartridge
• Ceramic shaft and thrust bearing
• Carbon bearings
• EPDM o-ring and gaskets

taco 007e-f2

Grundfos UPS 15-58 FC 3-Speed Circulator Pump, 1/25 HP, 115 VAC , 2450 RPM , 0 - 17 gpm

• Built-in motor protection for longer life and better performance
• Whisper quiet operation for sound sensitive installations
• Includes (2) Gaskets
• With removable integrated check valve
• No mechanical seal or coupler
• 3-speeds for system flexibility and energy savings
• Water lubricated and maintenance free

Sid Harvey Item #:UPS15-58FC: Replaces Part #:'s : L86-867

grundfos ups15-58fc

Bell & Gossett Red Fox 103417 3-Speed In-Line Circulator Pump, 1/15 HP, 115 volt, 2950 RPM, 24 gpm

• Double sintered carbon bearing
• Ceramic shaft
• High starting torque provides years of trouble-free start-ups
• Unique B&G DuraGlide bearing system assures whisper - quiet, maintenance-free operation
• Closed impeller design improves operating efficiency
• Wet rotor circulator
• Stabilized, heat resistant, non-metallic impeller, its closed design improves operating efficiency
• Self-cleaning particle shield protects the shaft and bearings from system start-up debris

Sid Harvey Item #:NRF-25: Replaces Part #:'s : 38573

Bell & Gossett NRF-25

Grundfos UPS 15-58 FRC 3-Speed Circulator Pump, 1/25 HP, 115 VAC , 2450 RPM , 0 - 17 gpm

• 3-speed super brute circulator pump
• Rotated flanged housing
• With integral check valve
• Built-in motor protection for long life
• Multiple accessories for a variety of applications
• Whisper quiet operation for sound sensitive installations

Sid Harvey Item #:UPS15-58FRC: Replaces Part #:'s : L80-321

grundfos ups15-58frc

Taco 0015-MSF2-IFC 3-Speed In-Line Circulator Pump, 1/20 HP, 115 VAC , 3250 RPM , 0 - 18 gpm

• Fine tune to system requirements
• Highest performance & starting torque in class
• Heavy duty construction for longer life
• 4-bolt universal flange
• Removable high-flow Integral Flow Check (IFC®)
• Prevents gravity flow
• Reduces installation costs
• Improves pump performance
• Replaceable cartridge design
• Quiet, efficient operation
• Self-lubricating, no mechanical seal
• Acetal plunger body
• EPDM o-ring seal
• Stainless steel spring, steel stator housing
• Ceramic shaft and carbon bearings

taco 0015-msf2-ifc

Taco 006 Circulator Pump, 1/40 HP, 115 VAC , 11 gpm

• Standard high capacity output and compact design
• Quiet, efficient operation
• Direct drive, low power consumption
• Unique replaceable cartridge design-field serviceable
• Self lubricating, no mechanical seal
• Unmatched reliability, maintenance free
• Unique replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator
• Compact, low power consumption design is ideal for high efficiency jobs
• With integral flow check and without flanges
• For indoor use only

Sid Harvey Item #:B53-14: Replaces Part #:'s : 39191

taco b53-14

Taco 007E-2F4 Cast Iron High-Efficiency ECM Circulator Pump, 16 gpm, 120 volt, 4830 RPM Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.

• ECM performance equivalent to the legendary 007 circulator
• High-efficiency ECM motor uses up to 85% less electricity
• BIO Barrier protects pump from system contaminants
• SureStart automatically frees locked rotor condition and self-purges air from pump
• Integral flow check (IFC) included
• Dual electrical knockouts, 6" stranded wire leads included for easy wiring
• Use with a Taco ZVC zone valve control or SR switching relay for on/off operation
• Double insulated, no ground wire required
• Whisper quiet operation
• Equipped with a cast iron casing and should be used for closed loop systems only
• Circulator pumps are for indoor use only
• Acceptable for use with water or maximum of 50% water/glycol solution
• Composite stator housing, cartridge and impeller
• Ceramic shaft, ceramic thrust bearing
• EPDM O-ring and gaskets
• Carbon bearing Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.

  taco 007e-f4

Bell & Gossett Red Fox 103251 1-Speed Circulator Pump, 1/25 HP, 115 VAC , 2940 RPM , 0 - 22 gpm

• Double-sintered carbon bearing
• Ceramic shaft
• High starting torque provides years of trouble-free start-ups
• Unique B&G DuraGlide bearing system assures whisper - quiet, maintenance-free operation
• Closed impeller design improves operating efficiency
• Wet rotor circulator
• Stabilized, heat resistant, non-metallic impeller. Its closed design improves operating efficiency
• Self-cleaning particle shield protects the shaft and bearings from system start-up debris

Sid Harvey Item #:B50-54: Replaces Part #:'s : 3704

Bell & Gossett B50-54

The high velocity series 0010-IFC includes an Integral Flow Check, saving installation costs while improving system performance. The removable, spring-loaded IFC® replaces a separate in-line flow check and prevents gravity flow when the circulator is not operating. Available in cast iron or stainless steel construction.

• Includes Integral Flow Check (IFC)
• Prevents gravity flow
• Eliminates separate in-line flow check
• Reduces installed costs, easy to service
• Improved performance vs standard in-line flow check
• Unique replaceable cartridge design - field serviceable
• Unmatched reliability, maintenance free
• Quiet, efficient operation
• Direct drive - low power consumption
• Self-lubricating, no mechanical seal
• Standard high capacity output, compact design
• Acetal body plunger
• Aluminum stator housing, stainless steel cartridge, ceramic shaft, carbon bearing, EPDM o-ring and gaskets

Sid Harvey Item #:B53-27: Replaces Part #:'s : 5W305

taco b53-27

Bell & Gossett 100NFI In-Line Circulator Pump, 1/12 HP, 115 VAC , 0 - 33 gpm

• The shaft and seal are housed in an assembly that can be easily repaired or replaced
• This pump's motor design, coupled with its overall hydraulic performance, allows the Bell & Gossett series 100 to overcome system-related noise caused by valves, fittings or piping
• Resilient mounting provides quiet, dependable service with minimum annual lubrication
• Features a precision ground pump shaft is oversized to provide large bearing surfaces and a hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life
• Carbon steel shaft

Sid Harvey Item #:B51: Replaces Part #:'s : 3406

Bell & Gossett B51