ICP END4X30L17A Sturdy Pre-Painted Steel Cabinet Upflow/Downflow (Vertical) Cased N Evaporator Coil with TXV Metering, 2.5 Ton, 30,000 BTU

• Bolt-on TXV metering device factory installed on all models
• (2) condensate drain connections
• Removable front access panel
• Hemmed flanges for safer handling
• Foil faced insulation
• Non-sweat cabinet even at eXtreme conditions
• Cabinets meet or eXceed 2% air leakage codes
• Up flow or down flow installation
• Compact design, shorter than comparable a-coils
• Aluminum hairpin
• 5 years parts limited warranty

Aspen Manufacturing CC30A2G-175L-059 Embossed Galvanized Copper Tube Residential Upflow/Downflow Cased Evaporator Coil with Flowrater Metering, 2.5 Ton, 30,000 BTU

• Rifled copper tubing, enhanced aluminum fins
• Immersion tested at 500 psi, then nitrogen-pressurized and sealed
• Left hand refrigerant and plumbing connections
• Externally mounted flow rater body with Schrader valve for hiss-testing
• Heavy-duty plastic drain pans on most models
• Split access doors in front for easy service
• Fully insulated cabinets with faced insulation
• 10 years warranty

ICP END4X36L21A Sturdy Pre-Painted Steel Cabinet Upflow/Downflow (Vertical) Cased N Evaporator Coil with TXV Metering, 3 Ton, 36,000 BTU

• Bolt-on TXV metering device factory installed on all models
• (2) condensate drain connections
• Removable front access panel
• Hemmed flanges for safer handling
• Foil faced insulation
• Non-sweat cabinet even at eXtreme conditions
• Cabinets meet or eXceed 2% air leakage codes
• Up flow or down flow installation
• Compact design, shorter than comparable a-coils
• Aluminum hairpin
• 5 years parts limited warranty

ICP EMA4X36DAL Downflow Uncased N Evaporator Coil with TXV Metering, 3 Ton, 36,000 BTU

• Bolt-on TXV metering device factory installed on all models
• (2) condensate drain connections
• N evaporator design to keep height at a minimum
• Shipped with condensate drain hose and trap
• Shipped with fittings and adapter plates
• Aluminum hairpin
• 5 years parts limited warranty
• Designed for mobile home down flow gas furnaces
• Loose application

ICP END4X24L17A Sturdy Pre-Painted Steel Cabinet Upflow/Downflow (Vertical) Cased N Evaporator Coil with TXV Metering, 2 Ton, 24,000 BTU

• Bolt-on TXV metering device factory installed on all models
• (2) condensate drain connections
• Removable front access panel
• Hemmed flanges for safer handling
• Foil faced insulation
• Non-sweat cabinet even at eXtreme conditions
• Cabinets meet or eXceed 2% air leakage codes
• Up flow or down flow installation
• Compact design, shorter than comparable a-coils
• Aluminum hairpin
• 5 years parts limited warranty

Fujitsu FCC3617TSA Standard Efficiency Cased N Coil, R410A TXV, 3 Ton, 36000 BTU

• Constructed of aluminum fins bonded to internally grooved aluminum tubing
• Coils are tested at the factory with an extensive refrigerant leak check
• Coils have copper sweat refrigerant connections
• Feature two sets of 3/4" NPT Condensate drain connections for ease of connection
• Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only)
• Approved for system application with variety of Fujitsu outdoor units
• Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material
• Compatible with germicidal light system (UV resistant)
• Bi-directional airflow eliminates the need to switch any internal components from horizontal left to right
• Unique drain pan design maximizes application flexibility and condensate removal
• N-Coil design maximizes performance and minimizes height required at installation
• Coils are AHRI certified for system application with a variety of Fujitsu outdoor units
• TEV metering device

Aspen Manufacturing CC24A2G-145L-059 Embossed Galvanized Copper Tube Residential Upflow/Downflow Cased Evaporator Coil with Flowrater Metering, 2 Ton, 24,000 BTU

• Rifled copper tubing, enhanced aluminum fins
• Immersion tested at 500 psi, then nitrogen-pressurized and sealed
• Left hand refrigerant and plumbing connections
• Externally mounted flow rater body with Schrader valve for hiss-testing
• Heavy-duty plastic drain pans on most models
• Split access doors in front for easy service
• Fully insulated cabinets with faced insulation
• 10 years warranty

Honeywell SmartValve SV9502H2522 Intermittent Hot Surface Pilot Natural/LP Gas Valve, 1/2", NPT The SmartValve system controls combine gas flow control and electronic intermittent pilot sequencing functions into 1-unit. This product family offers several different intermittent pilot sequences for a wide range of applications. The specific application of the SmartValve system is the responsibility of the appliance manufacturer. They are directly compatible with the Q3450 or Q3480 intermittent pilot burners used with the original controls on the appliance.

• Ignition sequence includes timed trial for ignition
• Includes natural to LP conversion kit, extension harness
• 0 - 90 deg in any direction from the upright position of the gas control knob, including vertically mounting
• Universal tradeline value
• 1.6 sec at 3 micro-amp flame failure response time
• 15 sec pre-purge time
• Intermittent pilot ignition sequence
• HSI flame sense, pilot ignition source
• Continuous retry ignition trials to lockout
• 90 sec ignition trial time
• Q3450, Q3480 typical ignition hardware
• Includes pilot gas outlet
• Straight through configuration The SmartValve system controls combine gas flow control and electronic intermittent pilot sequencing functions into 1-unit. This product family offers several different intermittent pilot sequences for a wide range of applications. The specific application of the SmartValve system is the responsibility of the appliance manufacturer. They are directly compatible with the Q3450 or Q3480 intermittent pilot burners used with the original controls on the appliance. Sid Harvey Item #:SV9502H2522: Replaces Part #:'s : 12556
  

  uncased evaporator coil

Aspen Manufacturing CC30A2G-145L-059 Embossed Galvanized Copper Tube Residential Upflow/Downflow Cased Evaporator Coil with Flowrater Metering, 2.5 Ton, 30,000 BTU

• Rifled copper tubing, enhanced aluminum fins
• Immersion tested at 500 psi, then nitrogen-pressurized and sealed
• Left hand refrigerant and plumbing connections
• Externally mounted flow rater body with Schrader valve for hiss-testing
• Heavy-duty plastic drain pans on most models
• Split access doors in front for easy service
• Fully insulated cabinets with faced insulation
• 10 years warranty

ICP END4X24L14A Sturdy Pre-Painted Steel Cabinet Upflow/Downflow (Vertical) Cased N Evaporator Coil with TXV Metering, 2 Ton, 24,000 BTU

• Bolt-on TXV metering device factory installed on all models
• (2) condensate drain connections
• Removable front access panel
• Hemmed flanges for safer handling
• Foil faced insulation
• Non-sweat cabinet even at eXtreme conditions
• Cabinets meet or eXceed 2% air leakage codes
• Up flow or down flow installation
• Compact design, shorter than comparable a-coils
• Aluminum hairpin
• 5 years parts limited warranty

Aspen Manufacturing CC36A2G-175L-059 Embossed Galvanized Copper Tube Residential Upflow/Downflow Cased Evaporator Coil with Flowrater Metering, 3 Ton, 36,000 BTU

• Rifled copper tubing, enhanced aluminum fins
• Immersion tested at 500 psi, then nitrogen-pressurized and sealed
• Left hand refrigerant and plumbing connections
• Externally mounted flow rater body with Schrader valve for hiss-testing
• Heavy-duty plastic drain pans on most models
• Split access doors in front for easy service
• Fully insulated cabinets with faced insulation
• 10 years warranty

ICP END4X42L21A Sturdy Pre-Painted Steel Cabinet Upflow/Downflow (Vertical) Cased N Evaporator Coil with TXV Metering, 3.5 Ton, 42,000 BTU

• Bolt-on TXV metering device factory installed on all models
• (2) condensate drain connections
• Removable front access panel
• Hemmed flanges for safer handling
• Foil faced insulation
• Non-sweat cabinet even at eXtreme conditions
• Cabinets meet or eXceed 2% air leakage codes
• Up flow or down flow installation
• Compact design, shorter than comparable a-coils
• Aluminum hairpin
• 5 years parts limited warranty