Brand Name
Series
Temperature Range
Switching
Voltage
Temperature Differential
Measurements
Secondary Volts
View:
Honeywell L4064B2210 Fan and Limit Switch for Forced Warm Air Heating Systems, 100 - 250 deg F High Limit
  • 3 wiring terminal options available for easy installation
  • Push-in receptacles for stripped wire
  • Female receptacles for 1/4" male flag connectors
  • Field add-on screw terminals
  • Controls adapt to many competitive mounting holes in replacement applications
  • Available in a variety of fan and high limit setting ranges
  • L4064B, W models have manual fan switch that overrides fan control to keep fan running continuously
  • Super tradeline models with mounting adapters for easy installation and strain relief bushings to protect wiring from field abuse
Sid Harvey Item #:C434-9: Replaces Part #:'s : C445-12 | FAL4064B2210-C434-9 |
Item#:
C434-9
Manufacturer Item:
L4064B2210
Manufacturer:
HONEYWELL
Cleveland Controls RSS-495-11 Thermoplastic Adjustable Set Point Air Pressure Sensing Switch Kit, 120 - 277 VAC, SPDT, 0.25 - 1 Inch WC
  • Barbed sample line connectors on each side of the diaphragm accept flexible tubing
  • Switch can be actuated by a positive or negative pressure, or by a pressure differential
  • Actuate on either pressure rise or fall
Item#:
RSS-495-011
Manufacturer Item:
RSS-495-11
Manufacturer:
ESP COMPANY
Honeywell L4064B2236 Fan and Limit Switch for Forced Warm Air Heating Systems, 100 - 250 deg F High Limit
  • 3 wiring terminal options available for easy installation
  • Push-in receptacles for stripped wire
  • Female receptacles for 1/4" male flag connectors
  • Field add-on screw terminals
  • Controls adapt to many competitive mounting holes in replacement applications
  • Available in a variety of fan and high limit setting ranges
  • L4064B, W models have manual fan switch that overrides fan control to keep fan running continuously
  • Super tradeline models with mounting adapters for easy installation and strain relief bushings to protect wiring from field abuse
Sid Harvey Item #:C434-12: Replaces Part #:'s : C445-10 | FAL4064B2236-C434-12 |
Item#:
C434-12
Manufacturer Item:
L4064B2236
Manufacturer:
HONEYWELL
Honeywell ST9120U1011 Universal Electronic Fan Timer For Control of Combustion Blower for a Gas Warm Air Appliances, 18 - 30 VAC
  • Replaces 40+ existing Honeywell electronic fan timers
  • Instruction sheet supplies full cross reference and wiring guide
  • Interface harnesses for simple conversion
  • Dip switch selectable heat and cool delay on and off times
  • Electronic air cleaner and humidifier terminal connections
  • Continuous low speed indoor air circulation
  • Integrates control of all combustion blower and circulating fan operations in gas warm-air appliance
  • Replaceable fuse
  • Heat fan on delay - adjustable 30, 60 sec ( set at 30 sec)
  • Heat fan off delay - adjustable 60, 120, 150, 180 sec (set at 120 sec)
  • Cool fan on delay - adjustable 4, 30 sec (set at 4 sec)
  • Cool fan off delay - adjustable 30, 60 sec (set at 30 sec)
Sid Harvey Item #:ST9120U1011: Replaces Part #:'s : ST9101A1014 | ST9101A1022 | ST9120A2004 | ST9120C2002 | ST9120C2010 | ST9120C3000 | ST9120C3018 | ST9120C4008 | ST9120C4016 | ST9120C4040 | ST9120C4057 | ST9120C5005 | ST9120C5013 | ST9120D3009 | ST9120G2024 | ST9120G4004 | ST9120G4038 | ST9120U1003 | ST9141A1002 | ST9141A1028 | ST9141B1001 | ST9150A1003 | ST9150B2000 | ST9150B2018 | ST9150B2026 | ST9150C4057 | ST9160A1002 | ST9160B1001 | ST9160B1019 | ST9160B1027 | ST9160B1035 | ST9160B1043 | ST9160B1050 | ST9160B1068 | ST9160B1076 | ST9160C1000 | ST9160C1018
Item#:
ST9120U1011
Manufacturer Item:
ST9120U1011
Manufacturer:
HONEYWELL
Honeywell L4064B2228/U Fan and Limit Control, 120/240 VAC
  • Controls high limit and fan motors in forced air heating systems
  • Push-in receptacles for stripped wire
  • Female receptacles for 1/4" male flag connectors
  • Auxiliary screw terminals
  • Field adjustable fan and high limit settings
  • L4064B, W and R models have a manual fan switch that overrides the fan control to keep the fan running continuously
  • Tradeline models with mounting adapters for easy installation and strain relief bushings to protect wiring from field abuse
  • Turns fan on and off according to plenum temperature via helical bi-metal sensing element
  • High limit stop set at 200 deg F
  • Breakaway jumper included
  • Includes manual and automatic fan on/off settings
  • Maximum ambient 190 deg F switch: 350 deg F element, 100 - 250 deg F high limit, 65 - 215 deg F fan-on, 50 - 200 deg F fan-off, 200 deg F high limit stop, 125 deg F fan-on stop, 100 deg F fan-off stop
  • Fan switch makes and high limit switch breaks on temperature rise
  • 0.25 amp at 0.25 - 12 VDC, 2 amp at 24 VAC pilot duty
Sid Harvey Item #:C434-7: Replaces Part #:'s : C445-9 | FAL4064B2228-C434-7 |
Item#:
C434-7
Manufacturer Item:
L4064B2228
Manufacturer:
HONEYWELL
Honeywell TrueZONE HZ311/U 3-Zone Zone Panel, 24 VAC , 1 Heat/1 Cool
  • Robust push terminals
  • Common-sense LEDs
  • Clean, professional installation
  • Smaller footprint
  • Variable speed fan control
  • Discharge air temperature sensor
  • Resettable fuse
  • Individual zone fan control
  • 5 - 90% RH non-condensing
  • The HZ311 has mounting holes on the sides top and bottom so it can be mounted on a wall, return duct or stud
  • 18 - 20 ga solid wiring
Sid Harvey Item #:HZ311: Replaces Part #:'s : 40688
Item#:
HZ311
Manufacturer Item:
HZ311
Manufacturer:
HONEYWELL
ICM Controls ICM282 Furnace Control Board, 98 - 132 VAC
Sid Harvey Item #:ICM282: Replaces Part #:'s : HK42FZ011
Item#:
ICM282
Manufacturer Item:
ICM282A
Manufacturer:
ICM INTERNATIONAL
The 50A65-5165 is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyze, and control the proper operation of the gas burner, inducer, and fan. signals interpreted during continual surveillance of the thermostat and flame sensing element initiate automatic ignition of the burner, sensing of the flame, and system shutoff during normal operation. these controls incorporates system fault analysis for quick gas flow shutoff , coupled with automatic ignition retry upon sensing a fault correction. it is designed as a replacement for the following controls.
  • Twinning connection
  • Fused to protect low VAC age system transformers
  • 1.5 amp valve relay
  • 6 amp igniter relay
  • 2.2 amp full load - 3.5 amp locked rotor inducer relay
  • 14.5 amp full load - 25 amp locked rotor circulator relay
  • 1 micro-amp DC minimum current
  • 0.10 micro-amp DC max current
  • 100 mega-ohm leakage resistance
  • Maximum timing specification
  • 0.8 sec flame establishing
  • 2 sec flame failure response time
  • 77 deg F electrical rating
  • Flash code diagnostics, controls gas valve, igniter, blower, inducer, 120 VAC humidifier and air cleaner
Sid Harvey Item #:50A65-5165: Replaces Part #:'s : CNT05165 | CNT5165 |
Item#:
50A65-5165
Manufacturer Item:
50A65-5165
Manufacturer:
WHITE-RODGERS DIV EMERSON
White Rodgers 50A56-956 Replacement Integrated Furnace Control, 25 VAC , The 50A56-956 is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyze, and control the proper operation of the gas burner, inducer, and fan. signals interpreted during continual surveillance of the thermostat and flame sensing element initiate automatic ignition of the burner, sensing of the flame, and system shutoff during normal operation. these controls incorporate system fault analysis for quick gas flow shutoff , coupled with automatic ignition retry upon sensing a fault correction. Sid Harvey Item #:50A56-956: Replaces Part #:'s : ICM2808
Item#:
50A56-956
Manufacturer Item:
50A56-956
Manufacturer:
WHITE-RODGERS DIV EMERSON
The 50A55-843 universal silicon carbide integrated ignition module employs a microprocessor which continually monitors, analyzes and controls the proper operation of the gas burner, inducer and fan. This one module will replace most of the 50A5X-XXX integrated ignition carbide modules that have been manufactured by White-Rodgers for most OEM applications. The universal module includes an extensive cross-reference, additional jumper wires, additional wiring harness and a jumper for Trane applications. The module also has terminals for powering a humidifier and electronic air cleaner.
  • Diagnostic LED
  • Additional jumpers to extend the length of the connections
Sid Harvey Item #:50A55-843: Replaces Part #:'s : D330927P01 | D330930P01 | D330934P01 | D340035P01 | D340354P01 | D340774P01 |
Item#:
50A55-843
Manufacturer Item:
50A55-843
Manufacturer:
WHITE-RODGERS DIV EMERSON
ICM Controls ICM289 Furnace Control Board, 98 - 132 VAC at 60 Hz Line
  • Low cost form, fit and functional replacement board for Lennox BCC1, BCC2 and BCC3 circuit boards
  • Controls inducer fan motor, blower fan and monitors limit switches
  • Micro-processor based design
  • Functions with all 24 VAC thermostats
Sid Harvey Item #:ICM289: Replaces Part #:'s : BBC1 | BBC2 | BBC3
Item#:
ICM289
Manufacturer Item:
ICM289
Manufacturer:
ICM INTERNATIONAL
Sid Harvey Item #:216-1SK: Replaces Part #:'s : 5H630
Item#:
216-1SK
Manufacturer Item:
216-1SK
Manufacturer:
SKUTTLE MFG CO
View: