Aprilaire 6200 Series control panels are designed for single-stage heat/cool systems only. The simple and straight-forward installation prevents time wasted on complicated set-up steps that could create a call back. The simplicity and low cost make the 6200 series control panels perfect for new construction applications or as an add-on for an existing home. The model 6202 is for 2 zone applications and the Model 6203 can be used for 2 or 3 zone systems. Each has all the basic features required for a solid performing zoned comfort system.

• Any zone sets mode provides true independent control for each zone
• Continuous fan by zone individual zone thermostats can call for fan operation by zone
• Zone changeover based on time If calls for opposite modes exist, the control panel will alternate to satisfy each call
• Fan purde assures air is directed to last zone(s) calling
• Short cycle protection protects the HVAC equipment from too frequent cycling
• Maintenance free no maintenance or adjustments needed after installation

Sid Harvey Item #:6202AA: Replaces Part #:'s : L40-217,

6202AA

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

5070 2-7/8" to 5" Adjustable Versa Cap,

5070

All products are designed providing effective distribution of conditioned air from the air handler to every room of a residence. Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.


Francer Industries ANGLE624 45 Degree Elbow 6" Gallonvanized 24 Gauge,

Francer Industries ANGLE624

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


Duc-Pac Corp 95-6L 45 Degree Elbow 6" Galvanized 26 Gauge,

95-6L

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.


Francer Industries ANGLE724 45 Degree Elbow 7" Gallonvanized 24 Gauge,

Francer Industries ANGLE724

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


Duc-Pac Corp 95-7L 45 Degree Elbow 7" Galvanized 26 Gauge,

95-7L

All Snappy products are designedand manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


Snappy 421-665 45 Degree Wye Air Flow 6" x 6" x 5" Galvanized,

421-665

Space Pak AC-IKLT-5 5-Outlet Installation Kit for All Duct System Type

,

AC-IKLT-5

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

7090 6-7/8" to 9" Adjustable Versa Cap,

7090

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


Southwark ELBOW-10x26 90 Degree Elbow 10" Galvanized 26 Gauge,

ELBOW-10X26

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


Southwark SP-241 90 Degree Elbow 10" Galvanized 26 Gauge,

SP-241