Brand Name
BTU
Voltage
Position
View:
ICP FXM4X2400AL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 3 Ton, 36K BTU 208/230 VAC
  • TXV metering device factory installed
  • High efficiency, 3-speed, Genteq X-13 electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • MaXimum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FXM4X3600AL
Manufacturer Item:
FXM4X3600AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
ICP FXM4X2400AL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 2 Ton, 24K BTU 208/230 VAC
  • TXV metering device factory installed
  • High efficiency, 3-speed, Genteq X-13 electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • MaXimum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FXM4X2400AL
Manufacturer Item:
FXM4X2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
ICP FXM4X2400AL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 2-1/2 Ton, 30K BTU 208/230 VAC
  • TXV metering device factory installed
  • High efficiency, 3-speed, Genteq X-13 electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • MaXimum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FXM4X3000AL
Manufacturer Item:
FXM4X3000AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FH3017TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat air handler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check. Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
  • 36K BTU 3 Ton
  • 208/230/1 VAC
  • 17" Wide
  • PSC Motor
  • Multi-Position
Item#:
FH3617TPSJSN
Manufacturer Item:
FH3617TPSJSN
Manufacturer:
FUJITSU
ICP FEM4X3000BL Gray Upflow/Horizontal Multi-Position Slope Evaporator Fan Coil with EC Motor and TXV Metering, 2.5 Ton, 30000 BTU, 208/230 VAC
  • TXV metering device
  • Copper tube/aluminum fin coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • 5-speed ECM motor
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness
  • No heat (plug) kit factory installed
  • 5 years limited parts warranty
  • Sales code
  • Aluminum tube and fin evaporator coil
Item#:
FEM4X3000BL
Manufacturer Item:
FEM4X3000BL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
ICP FxM4x2400AL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 4 Ton, 48K BTU 208/230 VAC
  • TXV metering device factory installed
  • High efficiency, 3-speed, Genteq x-13 electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • Maximum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FXM4X4800AL
Manufacturer Item:
FXM4X4800AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
ICP FEM4X3000BL Gray Upflow/Horizontal Multi-Position Slope Evaporator Fan Coil with EC Motor and TXV Metering, 3.0 Ton, 36000 BTU, 208/230 VAC
  • TXV metering device factory installed
  • High efficiency, 5-speed, electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • Low VAC age circuit protective fuse 3 amp in-line on wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • No heat (plug) kit factory installed
  • Filter factory supplied
  • Maximum fuse size 15 amp
  • 5 years parts limited warranty
Item#:
FEM4X3600BL
Manufacturer Item:
FEM4X3600BL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
ICP FEM4x2400CL Gray Upflow/Horizontal Multi-Position Slope Evaporator Fan Coil with EC Motor and TXV Metering, 2 Ton, 24000 BTU, 208/230 VAC
  • TXV metering device
  • Copper tube/aluminum fin coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • 5-speed ECM motor
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness
  • No heat (plug) kit factory installed
  • 5 years limited parts warranty
  • Sales code
  • Aluminum tube and fin evaporator coil
Item#:
FEM4X2400CL
Manufacturer Item:
FEM4X2400CL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
ICP FEM4P2400AL Gray Upflow/Horizontal Multi-Position Slope Evaporator Fan Coil with EC Motor and PisTon Metering, 2 Ton, 24000 BTU, 208/230 VAC
  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness
  • 5 years limited parts warranty
Item#:
FEM4P2400AL
Manufacturer Item:
FEM4P2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FH4821TPSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat air handler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check. Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
  • 48K BTU 4 Ton
  • 115/1 VAC
  • 21" Wide
  • PSC Motor
  • Multi-Position
Item#:
FH4821TPSJSN
Manufacturer Item:
FH4821TPSJSN
Manufacturer:
FUJITSU
Fujitsu FH3017TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat air handler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check. Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
  • 30K BTU 3 Ton
  • 208/230/1 VAC
  • 17" Wide
  • PCS Motor
  • Multi-Position
Item#:
FH3017TPSJSN
Manufacturer Item:
FH3017TPSJSN
Manufacturer:
FUJITSU
ICP FVM4X3600BL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 3 Ton, 36K BTU 208/230 VAC
  • TXV metering device factory installed
  • High efficiency, 2-stage variable speed electronically commutated motor (ECM)
  • Copper tube/aluminum fin coil
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • Adjustable cooling and heating on/off delay
  • Multiple electrical entry locations
  • Time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
  • 1" thick insulation with R value of 4.2
  • Humidifier/humidistat terminals
  • Filter factory supplied
  • MaXimum fuse size 15 amp
  • TXV and manifold positioned to the side for easier cleaning
  • Zero clearance without heaters
  • 10 years limited evaporator coil warranty and 7 years limited parts warranty
Item#:
FVM4X3600BL
Manufacturer Item:
FVM4X3600BL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
View: