Brand Name
Part Type
Accessory Type
|◀ 1 - 12 of 166 ▶|
View:
Marshall Excelsior ME1669-20 Annealed Copper Pigtail, 1/4 Inch, Male Hard Nose POL x 1/4 Inch MNPT, 20 Inch L
  • 7/8 Inch nut
  • Long nipple
  • 1/4 Inch tube have a pull test rating of 500 lb
Sid Harvey Item #:1669-20: Replaces Part #:'s : 912JS20
Item#:
1669-20
Manufacturer Item:
ME1669-20
Manufacturer:
MARSHALL EXCELSIOR CO.
Bergquist 1701B Brass Manifold Tee Block with 7/8 Inch Hex Nut
  • Multiple cylinder tee block manifolds are designed to connect multiple cylinders to automatic changeover regulators.
  • These manifolds have no check and are primarily for systems requiring more than one cylinder to be in operation at a time
  • The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve
Item#:
1701B
Manufacturer Item:
1701B
Manufacturer:
MARSHALL EXCELSIOR CO.
Marshall Excelsior ME1662-20 Annealed Copper Pigtail, 1/4 Inch, Male Hard Nose POL, 20 Inch L
  • 7/8 Inch nut
  • Long nipple
  • 1/4 Inch tube have a pull test rating of 500 lb
Sid Harvey Item #:1662-20: Replaces Part #:'s : 912PS20
Item#:
1662-20
Manufacturer Item:
ME1662-20
Manufacturer:
MARSHALL EXCELSIOR CO.
Marshall Excelsior ME1662-48 Annealed Copper Pigtail, 1/4 Inch, Male Hard Nose POL, 48 Inch L
  • 7/8 Inch nut
  • Long nipple
  • 1/4 Inch tube have a pull test rating of 500 lb
Sid Harvey Item #:1662-48: Replaces Part #:'s : 912PS48
Item#:
1662-48
Manufacturer Item:
ME1662-48
Manufacturer:
MARSHALL EXCELSIOR CO.
Maxitrol 325-3L Aluminum Line Pressure Regulator with Vent Limiter, 1/2 Inch, FNPT, 2 psi
  • For residential, commercial or industrial applications
  • 1/8 Inch vent connection
  • 3 Inch swing radius
  • 65 psi inlet emergency exposure limits
Item#:
325-3L-1/2-12A09
Manufacturer Item:
325-3L-1/2-12A09
Manufacturer:
MAXITROL COMPANY
The integral 2-stage regulator uses two regulators in one body to regulate the inlet pressure of the gas from the tank or cylinder directly to the inlet pressure of the appliance. The 988TW regulator is designed for type B outside installations. The correct mounting position is with the vent angled down. The standard 988TW regulator has the vent hole facing in line with the outlet fitting. Integral 2-Stage Regulator.
  • Straight configuration
  • Italian design - engineered for the American market
  • Reinforced molded diaphragm and large surface GLT Viton seat disc
  • Superior performance, 100% tested - dimensionally inter-changeable
  • Lower profile for better dome lid clearance - perfect for under ground tanks
  • Screened inlets on all second-stage regulators
  • 1/8 Inch pressure taps with #54 orifice on the inlets and outlets of all regulators
  • Stainless steel screw and internal linkage assemblies
  • Seal on body flange to identify tampering
  • All aluminum body and cover, corrosion resistant finish
  • 5-year warranty
Item#:
988TW-15
Manufacturer Item:
988TW-15
Manufacturer:
KOSAN
Maxitrols 325 series pounds to inches regulators are for use on residential, commercial, and industrial applications. The 325 series features a high leverage valve linkage assembly to deliver positive dead-end lockup. The regulators are capable of precise control from full flow down to pilot flow.
  • Suitable for multi-positional mounting
  • 65 psi emergency exposure limits
  • 150000 BTU/hr total load of multiple appliances combined
  • 3 Inch swing radius
  • 1/8 Inch NPT vent
  • 4- 12 Inch WC standard spring range
Item#:
G1226-74
Manufacturer Item:
325-3-1/2
Manufacturer:
MAXITROL COMPANY
Integral 2-stage regulators combine the first and second stage regulator set-up into one convenient unit converting tank pressure to 11 Inch WC. All MEC integral 2-stage domestic regulators are gray indicating low outlet pressure. Integral 2-stage regulators are recommended for installations with short piping distances, but provide the same advantages of 2-stage regulator on with a single unit. All MEC integral 2-stage regulator vent have tapped ports and our exclusive E-Z Grip screens located over the outlet. The MEGR-1232 series offer optimal relief performance that well exceeds UL test requirements providing over pressure protection of no more than 2 psi downstream pressure.
  • Patent pending anti freeze heat transfer fins
  • Fluorocarbon seat, fabric reinforced NBR/molded lip o-ring bonnet/body seal diaphragm
  • Internal spring loaded relief
  • Standard 3-1/2 Inch center mounting holes
Item#:
MEGR-1232-BBF
Manufacturer Item:
MEGR1232-BBF
Manufacturer:
MARSHALL EXCELSIOR CO.
Bergquist NS4F Forged Brass Short Nut, 1/2 Inch, SAE 45 deg Flare
Item#:
NS4F
Manufacturer Item:
NS4F
Manufacturer:
USD Products
A 1-stage regulator reduces the high inlet pressure from the tank or cylinder to 10 psi, the rate of flow of a second stage regulator. The 984 HP compact regulator is designed for both type A and type C outside installations. The correct mounting position is with the vent-hole angled down. The standard 984 HP regulator has the vent-hole facing in line with the outlet fitting.
  • Straight configuration
  • Italian design - engineered for the American market
  • Reinforced molded diaphragm and large surface GLT Viton seat disc
  • Superior performance, 100% tested - dimensionally inter-changeable
  • Lower profile for better dome lid clearance - perfect for under ground tanks
  • Screened inlets on all second-stage regulators
  • 1/8 Inch pressure taps with #54 orifice on the inlets and outlets of all regulators
  • Stainless steel screw and internal linkage assemblies
  • Seal on body flange to identify tampering
  • All aluminum body and cover, corrosion resistant finish
  • 5-year warranty
  • Provided flows: Flow based on 25 psi inlet pressure and 20% drop
Item#:
988HP-05
Manufacturer Item:
988HP-05
Manufacturer:
KOSAN
Offers a compact first stage regulator design perfect for tight applications such as underground tank domes. They feature an adjustment range from 9 - 12 psig (factory set at 10 psig), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifice to minimize freeze ups while providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. These first stage regulators are used to reduce LP gas tank pressures for a second stage regulator (normally 10 psig). All MEC first stage regulators are red indicating high outlet pressure. First stage regulator vents have 3/4 Inch FNPT tapped ports and E-Z grip screens located over the outlet. Both the MEGR-1122H and the MEGR-1622H series offer optimal relief performance that well exceeds UL test requirements providing double failure overpressure protection when used with MEC MEGR-1622, MEGR-1642 and MEGR-1652 series second stage regulators. All MEC Excela-Flo domestic regulators feature a 25 years recommended replacement life and our exclusive tear away leak check adhesive sticker.
  • Fabric reinforced NBR/molded lip o-ring bonnet/body seal diaphragm
  • Internal relief - spring loaded relief type
  • Standard 3-1/2 Inch center mounting holes
  • #54 orifice 1/8 Inch FNPT plugged (2) pressure taps
  • Molded in adjustment cap - black (full size), gray (compact) relief travel stop
  • 10 Inch WC outlet set point
  • 3/8 Inch FNPT vent port
Item#:
MEGR-1122H-AAJ
Manufacturer Item:
MEGR-1122H-AAJ
Manufacturer:
MARSHALL EXCELSIOR CO.
Thermoplastic Elastomer High Pressure Oil and Gas Hose, 1/4 Inch x 350 - 700 feet Parflex HP hose has a blue, perforated elastomeric cover and is designed for a wide range of hydraulic and pneumatic applications. HP8 has an orange, non-perforated cover and is designed for electrically non-conductive hydraulic applications. HP8 hoses meet SAE J517 specifications for less than 50 micro amps electrical current leakage after aging and test at 75000 volts per foot.
Item#:
HP04
Manufacturer Item:
HP04
Manufacturer:
BERGQUIST INC.
|◀ 1 - 12 of 166 ▶|
View: