Brand Name
Material
Size
Fitting Type
|◀ 1 - 12 of 168 ▶|
View:
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4 Inch SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core braze type, loosely assembled. Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.
  • Made in USA
  • 1-core and cap are packaged with each valve
  • Swivel nut on run
  • Add multiple ports with just one fitting
  • Swivel flare connections offer a safe, simple installation without the need for brazing
  • All of the flare ends are tapped to receive access cores
Sid Harvey Item #:M17-60: Replaces Part #:'s : 41236
Item#:
M17-60
Manufacturer Item:
954-A31851
Manufacturer:
JB INDUSTRIES
Robo Fit NSR4-86 Forged Brass Short Reducing Nut, 1/2 x 3/8 Inch, SAE 45 deg Flare x Tube
  • Low cost
  • Can be assembled and reassembled repeatedly
  • Resists mechanical pull-out
  • Shapes are available as extrusions or forgings as indicated
  • Heavy duty flare fittings are manufactured to SAE specifications
  • Fair vibration resistance, the long nut offers greater support
Item#:
W2-21
Manufacturer Item:
NSR4-86
Manufacturer:
BRASS FITTINGS
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core (braze type, loosely assembled). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.
  • Made in USA
  • Valve core pre-torqued to ARI specification
  • Includes (1) cap and valve core per fitting
Item#:
A31727-100
Manufacturer Item:
A31727
Manufacturer:
JB INDUSTRIES
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4 Inch SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core braze type, loosely assembled. Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.
  • Made in USA
  • 1-core and cap are packaged with each valve
  • Swivel nut on run
  • Add multiple ports with just one fitting
  • Swivel flare connections offer a safe, simple installation without the need for brazing
  • All of the flare ends are tapped to receive access cores
Item#:
M17-72
Manufacturer Item:
A31864
Manufacturer:
JB INDUSTRIES
JB Industries A32700 Brass Adapter, 1/4 Inch, Swivel Flare x Solder
  • Double deep solder cups
Item#:
US5-44
Manufacturer Item:
A32700
Manufacturer:
JB INDUSTRIES
JB Industries A32701 Brass Adapter, 3/8 Inch, Swivel Flare x Solder
  • Double deep solder cups
Item#:
US5-66
Manufacturer Item:
US5-66
Manufacturer:
JB INDUSTRIES
JB Industries A32702 Adapter, 1/2 Inch, Female Swivel Flare x Solder
  • Includes (1) cap and valve core per fitting
Item#:
US5-88
Manufacturer Item:
A32702
Manufacturer:
JB INDUSTRIES
CPS Products AVT44 Brass Swivel Tee, 1/4 Inch, SAE 45 deg Flare
Sid Harvey Item #:AVT44: Replaces Part #:'s : 35200
Item#:
AVT44
Manufacturer Item:
AVT44
Manufacturer:
CPS PRODUCTS INC.
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4 Inch SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core braze type, loosely assembled. Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.
  • Made in USA
  • 1-core and cap are packaged with each valve
  • Swivel nut on run
  • Add multiple ports with just one fitting
  • Swivel flare connections offer a safe, simple installation without the need for brazing
  • All of the flare ends are tapped to receive access cores
Item#:
M17-70
Manufacturer Item:
A31854
Manufacturer:
JB INDUSTRIES
Streamline A 16474 Brass Replacement Seal Cap for Compressor Valve
  • 3/4-16 thread size
Item#:
A16474
Manufacturer Item:
A16474
Manufacturer:
MUELLER STREAMLINE CO
Century Brass RSNU-4-86 Brass Reducing Swivel Nut Union, 1/2 x 3/8 Inch, FPT
Item#:
USR-4-86
Manufacturer Item:
RSNU-86
Manufacturer:
BRASS FITTINGS
JB machines all of the brass fittings at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves higher tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. Our brass fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material. Vacuum pressures of 5000 psi can be handled depending on the size, material, and conditions. Using a 4:1 safety factor, the following general rule is used: 3000 psi to 1/4 Inch, 2000 psi to 1/2 Inch, and 1500 psi to 1 Inch. Long nuts are recommended when vibration is a factor. Tubing should be double flared in extreme applications to minimize flare thinning on over-tightening.
  • Double deep solder cups
  • Includes (1) cap and valve core per fitting
Item#:
US5-1010
Manufacturer Item:
A32703
Manufacturer:
JB INDUSTRIES
|◀ 1 - 12 of 168 ▶|
View: