|◀ 1 - 12 of 2587 ▶|
View:
ZoomLock fittings are specially designed to work without brazing, which automatically makes your job simpler and faster when joining copper tubes. In addition, the one-piece fittings are reliably secure, leak-proof and more repeatable than brazed connections - so there's no compromise on quality or performance. Professionals who have tried ZoomLock braze-free couplings report that their time and labor costs on tube connections are typically reduced 4 - 6% on average by eliminating the need for brazing. The biggest benefit of that improved efficiency is more productivity and increased profit potential, but there are also many other exciting advantages to brazefree tube connecting.
  • Less equipment and no gas needed
  • Safer conditions, no fire hazards
  • No hot work permits required
  • More environmentally friendly
  • No solder related quality issues, more flexible access to job sites and no need to nitrogen purge
  • No need to nitrogen purge
  • Mineral oil, POE, PVE, PAG oil compatibility, copper to copper connections, hard copper (drawn), soft copper (annealed)
  • 1234YF, 1234ZE, 125, 32, 134A, 143A, 44A, 47A, 47C, 47F, 41A, 438A, 447A, 448A, 449A, 45A, 452A, 57, 513A are approved refrigerants
  • 2 micron vacuum pressure
Item#:
PZK-C6-HNBR
Manufacturer Item:
770502
Manufacturer:
PARKER HANNIFIN(ZOOMLOCK)
Supco Bullet BPV31 Piercing Valve, 1/4 Inch, Male Flare, 500 psi
  • The only valve with a permanent type, patented gasket application
  • A sealing force of over 180 Inch-lb, torque tested with 450 lb pressure tested at 250 deg F
  • Patented valve gasket provides 50 times more sealing area than competitive o ring types
  • Corrosion resistant
  • Piercing needle is engineered for concentricity and hardness to insure perfect seating every time
  • Non-positional mounting, no adapter valve required
  • Requires only 2 Inch clearance for installation and operation
  • Install on round suction lines or uneven tubing, Install on the high side as a permanent valve on site
  • 1/4, 5/16 and 3/8 Inch outside diameter size
  • Furnished with adapter sleeves for indicated multiple use applications
  • Hex key wrench
Item#:
M13-40
Manufacturer Item:
BPV31
Manufacturer:
SEALED UNIT PARTS CO, INC
Streamline PVC schedule 40 pressure fittings are renowned for superior strength and enhanced performance. With a full line of diameters and styles, our fittings are designed and tested under real world cyclic pressure conditions so they excel in extreme applications where lesser products often fail. Along with superior strength, our pressure plastic fittings offer smooth inner walls for low pressure drops and superior resistance to chemicals and corrosion.
Item#:
406-007
Manufacturer Item:
406-007
Manufacturer:
PVC PIPE & FITTINGS
Mueller Industries Streamline PRS press fittings are the trusted, quality solution to flameless copper joining. Streamline PRS is Mueller Industries solution for professionals choosing to join copper tubing through the use of press technology. The company's Streamline brand has been the trusted name in copper piping systems since 1930. With Streamline PRS, this heritage of quality and reliability is now available for contractors preferring flameless, mechanical press joining.
  • Leak detection feature identifies un-crimped connections
  • EPDM seals are factory-installed and lubricated
  • Fast and easy to use
  • Flameless
  • Permanent connections
  • Consistent professional appearance
  • Less equipment required
  • Environmentally friendly system
  • 50 years limited warranty against defects in material and workmanship
Item#:
PR34X90SHORTELL
Manufacturer Item:
PF 01634
Manufacturer:
PRESS FITTINGS
Rathe Associates CR34CLAMP Stainless Steel Crimp Ring, 3/4 Inch, PEX Crimp (Barbed)
Item#:
CR34CLAMP
Manufacturer Item:
CR34CLAMP
Manufacturer:
RATHE ASSOCIATES INC
Bramec TEA-2420 Pipe Elbow, 3/4 x 5/8 Inch, Barb x MNPT, Nylon
Item#:
TEA2420
Manufacturer Item:
TEA-2420
Manufacturer:
BRAMEC CORP
Sid Harvey W55-19 Brass Hose Cap
Item#:
W55-19
Manufacturer Item:
W55-19
Manufacturer:
SID HARVEY INDUSTRIES INC.
Southland 564-030 SCH 40 Galvanized Carbon Steel Standard Pipe Nipple, 3/4 x 3 Inch, NPT
Item#:
564-030
Manufacturer Item:
564-030
Manufacturer:
BLACK/GALV FITTINGS
XR3 fittings are designed with a patented feature that contours the metal shield. This creates electrical continuity throughout the system. The XR3 fitting requires minimal torque for easy fitting installation. With no o-rings or gaskets, the reusable brass components provide a reliable metal-to-metal seat.
  • Metal lock for enhanced continuity
  • Tool-free flare fitting design
  • Metal-to-metal seal, with no split rings, O-rings or gaskets
  • Self-guiding assembly to ensure a perfectly even flare
  • Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut
  • All components are fully reusable
  • Straight fittings connect the flexible gas tubing to gas supply, distribution manifolds or gas appliances
Item#:
XR3FTG
Manufacturer Item:
XR3FTG-8-24
Manufacturer:
GASTITE PRODUCTS DIVISION
Streamline copper solder joint fittings for supply/pressurized systems have been the leading brand of copper fittings for over 80 years. Available in both wrot copper and cast bronze, our product selection has grown to become the most extensive in the industry. We are the acknowledged experts at engineering and manufacturing precision solder joint copper fittings. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.
  • Cup depths are manufactured to strict tolerances for strong and reliable joints
  • The internal working pressures of R410A and sub critical CO2 can be up to 60% higher than R-22
  • Manufacturer mark stamped on every fitting for easy identification
  • State of the art manufacturing provides consistent wall thickness
Item#:
COP34X90ELL
Manufacturer Item:
WB01634
Manufacturer:
COPPER FITTINGS
Holyoke Fittings 60-4 Brass Standard Sleeve, 1/4 Inch, Compression
Item#:
W20-2
Manufacturer Item:
60-4
Manufacturer:
BRASS FITTINGS
Southland 520-003 #150 Black Malleable Iron 90 deg Elbow, 1/2 Inch, NPT
Item#:
M1290E
Manufacturer Item:
520-003
Manufacturer:
BLACK/GALV FITTINGS
|◀ 1 - 12 of 2587 ▶|
View: