80% Single Stage Heating Furnace

• EASIER TO SELL
• 80% AFUE
• Flame rollout sensors standard
• Category I venting
• Blocked vent switch
• Louvered door
• 24 VAC and 115 VAC humidifier terminal
• Electronic air cleaner terminal
• Twinning furnaces of same heating and cooling sizes with approved kit
• N8MSL California NOx approved
• Certified to leak 2 percent or less of nominal air conditioning CFM delivered when pressurized to 1-inch Water Gauge with all present air inlets, air outlets, and condensate drain port(s) sealed
• TOUGHER
• PSC blower motor
• Adjustable heating blower OFF delay
• Factory set blower ON delay
• RPJ aluminized steel heat exchanger
• High temperature limit control prevents overheating
• Direct ignition with Silicon Nitride ignitor
• One piece prepainted steel cabinet
• QUIETER
• Inshot burners
• EASIER TO INSTALL AND SERVICE
• 33 1/3 (847mm) high, for ease of installation
• Innovative knobs for easy door removal and secure attachment
• Factory shipped for natural gas, with propane gas conversion kits available
• Four position  upflow/downflow/horizontal (left/right) installation
• Three position inducer elbow capability
• Through the casing flue pipe for counterflow applications
• Common venting with other Category I appliances
• Masonry chimney adapter available
• Self diagnostics
• Slide out blower assembly

Browning Super Gripbelt 3433000 Nylon Wrapped V-Belt, 33" L x 21/32" W x 7/16" T

• Wrapped construction - provides smooth quiet operation, single fabric design allows greater flexibility, wrapped belts are more tolerant to slipping and misalignment than raw edge belts
• Close belt tolerance - browning belts offer the"code 1" match belt system on all classical and 358 belts, allowing easy selection of just one match number for each belt size, this ensures tighter than RMA standards
• High tensile cord - specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
• Static conductivity
• 1 year warranty

Sid Harvey Item #:B30-BELT: Replaces Part #:'s : A256-33 | Bx30 |

International Comfort Products N80ESN0901714A

80% Single Stage Heating Furnace

• EASIER TO SELL
• 80% AFUE
• Flame rollout sensors standard
• Category I venting
• Blocked vent switch
• Louvered door
• 24 VAC and 115 VAC humidifier terminal
• Electronic air cleaner terminal
• Twinning furnaces of same heating and cooling sizes with approved kit
• N8MSL California NOx approved
• Certified to leak 2 percent or less of nominal air conditioning CFM delivered when pressurized to 1-inch Water Gauge with all present air inlets, air outlets, and condensate drain port(s) sealed
• TOUGHER
• PSC blower motor
• Adjustable heating blower OFF delay
• Factory set blower ON delay
• RPJ aluminized steel heat exchanger
• High temperature limit control prevents overheating
• Direct ignition with Silicon Nitride ignitor
• One piece prepainted steel cabinet
• QUIETER
• Inshot burners
• EASIER TO INSTALL AND SERVICE
• 33 1/3 (847mm) high, for ease of installation
• Innovative knobs for easy door removal and secure attachment
• Factory shipped for natural gas, with propane gas conversion kits available
• Four position  upflow/downflow/horizontal (left/right) installation
• Three position inducer elbow capability
• Through the casing flue pipe for counterflow applications
• Common venting with other Category I appliances
• Masonry chimney adapter available
• Self diagnostics
• Slide out blower assembly

Furnace Features

• Support for twinning applications
• Approved for manufactured housing and mobile homes
• California NOx approved
• Flame rollout sensors standard
• Adjustable heating blower OFF delay
• Factory set blower ON delay
• RPJ primary heat exchanger
• Stainless steel secondary heat exchanger
• High temperature limit control prevents overheating
• Direct ignition with Silicon Nitride igniter
• High quality, corrosionresistant, prepainted steel cabinet
• Direct vent, singlepipe venting or ventilated combustion air
• 24 VAC humidifier terminal
• Electronic air cleaner terminal
• 35" high, for ease of installation
• Easy door removal and secure attachment
• Pre-installed internal condensate drain system
• Operates as a natural gas furnace out of the box, and easily converts to a propane furnace with optional conversion kit
• Self diagnostics with bright LED
• Slide out heat exchanger and blower assembly
• Through the casing flue pipe for counterflow or horizontal applications with optional accessory
• Supports at least twelve different venting configurations
• Four position  upflow, downflow, horizontal (left/right) installation
• Concentric vent available

Browning Super Gripbelt 1083047 Nylon Wrapped V-Belt, 53" L x 21/32" W x 7/16" T

• Wrapped construction - provides smooth quiet operation, single fabric design allows greater flexibility, wrapped belts are more tolerant to slipping and misalignment than raw edge belts
• Close belt tolerance - Browning belts offer the"Code 1" match belt system on all classical and 358 belts, allowing easy selection of just one match number for each belt size, this ensures tighter than RMA standards
• High tensile cord - specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
• Static conducting
• 1 year warranty

Sid Harvey Item #:B50-BELT: Replaces Part #:'s : A256-53 | Bx50 |

International Comfort Products N95ESN0801716A

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty

Browning Super Gripbelt 1082965 Nylon Wrapped V-Belt, 45" L x 21/32" W x 7/16" T

• Wrapped construction provides smooth quiet operation, single fabric design allows greater flexibility
• Wrapped Belts are more tolerant to slipping and misalignment than Raw Edge Belts
• Close belt tolerance - browning belts offer the"Code 1" Match belt system on all classical and"358" belts, allowing easy selection of just one match number for each belt size, this ensures tighter than RMA standards
• High tensile cord specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
• Static conducting
• 1 year warranty

Sid Harvey Item #:B42: Replaces Part #:'s : A256-45 | Bx42 |

International Comfort Products N92ESN0801716A

Browning Super Gripbelt 1083039 Nylon Wrapped V-Belt, 52" L x 21/32" W x 7/16" T

• Wrapped construction provides smooth quiet operation, single fabric design allows greater flexibility
• Wrapped Belts are more tolerant to slipping and misalignment than Raw Edge Belts
• Close belt tolerance - browning belts offer the"Code 1" Match belt system on all classical and"358" belts, allowing easy selection of just one match number for each belt size, this ensures tighter than RMA standards
• High tensile cord specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
• Static conducting
• 1 year warranty

Sid Harvey Item #:B49-BELT: Replaces Part #:'s : A256-52 | Bx49 |

International Comfort Products N95ESN0601714A

Browning Super Gripbelt 3432994 Nylon Wrapped V-Belt, 32" L x 21/32" W x 7/16" T

• Wrapped construction - provides smooth quiet operation, single fabric design allows greater flexibility, wrapped belts are more tolerant to slipping and misalignment than raw edge belts
• Close belt tolerance - Browning belts offer the"Code 1" match belt system on all classical and"358" belts, allowing easy selection of just one match number for each belt size, this ensures tighter than RMA standards
• High tensile cord - specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
• Static conducting
• 1-year warranty

Sid Harvey Item #:B29: Replaces Part #:'s : P34-029

International Comfort Products N80ESN0701712A

EASIER TO SELL

Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1-inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed
• Approved for Twinning applications (0601716 through 1202422) with accessory (order separately)
• Approved for Manufactured Housing/Mobile Home applications (0401410 through 1202422) with accessory (order separately)
• TOUGHER
• Flame rollout sensors standard
• Adjustable heating blower OFF delay
• Factory set blower ON delay
• RPJ primary heat exchanger
• Stainless steel secondary heat exchanger
• High temperature limit control prevents overheating
• Direct ignition with Silicon Nitride ignitor
• High quality, corrosionresistant, prepainted steel cabinet
• EASIER TO INSTALL AND SERVICE
• Direct vent (2pipe), singlepipe venting or ventilated combustion air
• 24 VAC humidifier terminal & electronic air cleaner terminal
• 35 (889mm) high, for ease of installation
• Simplified, factory installed internal condensate drain system
• Innovative knobs for easy door removal and secure attachment
• Factory shipped for natural gas, with propane gas conversion kits available
• Four position  upflow/downflow/horizontal (left/right) installation
• At least twelve different venting configurations
• Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
• Concentric vent available
• Self diagnostics with super bright LED
• Slide out heat exchanger and blower assembly

Browning Super Gripbelt 1082957 Nylon Wrapped V-Belt, 44" L x 21/32" W x 7/16" T

• Wrapped construction provides smooth quiet operation, single fabric design allows greater flexibility
• Wrapped Belts are more tolerant to slipping and misalignment than Raw Edge Belts
• Close belt tolerance - browning belts offer the"Code 1" Match belt system on all classical and"358" belts, allowing easy selection of just one match number for each belt size, this ensures tighter than RMA standards
• High tensile cord specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
• Static conducting
• 1 year warranty

Sid Harvey Item #:B41: Replaces Part #:'s : A256-44 | Bx41 |

International Comfort Products N92ESN0601714A

Furnace Features

• Support for twinning applications
• Approved for manufactured housing and mobile homes
• California NOx approved
• Flame rollout sensors standard
• Adjustable heating blower OFF delay
• Factory set blower ON delay
• RPJ primary heat exchanger
• Stainless steel secondary heat exchanger
• High temperature limit control prevents overheating
• Direct ignition with Silicon Nitride igniter
• High quality, corrosionresistant, prepainted steel cabinet
• Direct vent, singlepipe venting or ventilated combustion air
• 24 VAC humidifier terminal
• Electronic air cleaner terminal
• 35" high, for ease of installation
• Easy door removal and secure attachment
• Pre-installed internal condensate drain system
• Operates as a natural gas furnace out of the box, and easily converts to a propane furnace with optional conversion kit
• Self diagnostics with bright LED
• Slide out heat exchanger and blower assembly
• Through the casing flue pipe for counterflow or horizontal applications with optional accessory
• Supports at least twelve different venting configurations
• Four position  upflow, downflow, horizontal (left/right) installation
• Concentric vent available