|◀ 1 - 12 of 536 ▶|
View:
Viessmann Vitodens 100-W B1KA 35 Stainless Steel Condensing Natural/LP Gas Equipped with a Viessmann stainless steel heat exchanger for lasting performance and reliability and a modulating matriX cylinder gas burner, the Vitodens 100-W wall mounted condensing boiler is the perfect combination of value, quality and Viessmann technology. Gas-fired wall-mounted condensing boiler with modulating stainless steel matriX cylinder burner, stainless steel inoxradial heat exchanger for room air independent operation (using a direct vent system) or room air dependent operation. B1KA comes equipped with an on demand hot water unit providing reliable hot water without a DHW tank.
Item#:
B1KA111
Manufacturer Item:
B1KA35
Manufacturer:
VIESSMANN MANUFACTURING INC.
Weil-McLain 313-300-110 Regular Intermediate Section for used on LGB Series gas Boilers
  • Sid Harvey Item #:313300110: Replaces Part #:'s : 22708
Item#:
313300110
Manufacturer Item:
313-300-110
Manufacturer:
WEIL-MCLAIN
Embassy Industries KCC-L Left End Cap
Sid Harvey Item #:KCC-L: Replaces Part #:'s : 2H975
Item#:
KCC-L
Manufacturer Item:
5612275121
Manufacturer:
EMBASSY INDUSTRIES
Panel-Track (KPT) baseboard is ideal for any type of residential or light commercial installation. With its rugged front panel, efficient operation, superior design and ease of installation, Panel-Track is the best baseboard in the industry. Today's Panel-Track is the culmination of more than 40 years of research and development by Embassy's heating specialists and engineers and is clearly the baseboard of choice by today's heating professionals.
  • Contemporary deep-drawn seamless end caps without unsightly weld spots
  • Panel-Track has a modern, streamlined design
  • The high-luster white finish blends beautifully with traditional and contemporary colors
  • Finger-touch snap-on damper opens and closes with ease, without the use of hinges which can bind or loosen with age
  • Easy to install heating element
  • One end of each heating element is expanded for simple end-to-end sweat connecting
  • Hanger brackets with built-in return
  • 3/4" copper tube with 2-1/8" x 2-1/8" x 0.008" aluminum fin
  • 60 fins/feet spacing
Sid Harvey Item #:KRP8: Replaces Part #:'s : 2H987
Item#:
KRP8
Manufacturer Item:
5612231208
Manufacturer:
EMBASSY INDUSTRIES
Thermo Dynamics Boilers S 100 High Altitude Hydronic Oil Fired Water Boiler with AFG Burner, 84.2% AFUE, 140000 BTU/hr
  • Allows the installer to size the boiler more closely to the home heating needs for greater efficiency, the lowest firing rate, 0.85 - 87,000 BTU/hr, is necessary for many well insulated homes where the heat loss is minimal
  • 1" thick pyrolite ceramic fiber combustion chamber, fast warm-up - glows to incandescence in 11 - 17 sec, large diameter allows brushing flue passages without punching through chamber
  • S-series operates at 140 psi pump pressure for better fuel atomization, thereby having the ability to tolerate fuel oil with heavy ends
  • S-series is standard with a state-of-the-art, solid state ignition system, making it more tolerant to low VAC age or VAC age fluctuations
  • Integrated ignition
  • Electronic delay with solenoid valve clean-cut fuel pump
  • S-series has exceptional water content, the first size has 16 gal of water, high water volume and placement of the coil in the hottest part of the boiler allows for maximum coil performance
  • The unique tube design of the S-series boiler heat exchanger slows the flue gases, allowing for more effective heat transfer without the need for extreme baffling often seen in other vertical tube boilers
  • Each boiler is constructed and hydrostatically tested in accordance with ASME boiler code, the capacity and efficiency are rated in accordance with the standards of the institute of boiler and radiator manufacturers (IBR)
  • Built-in air scoop purges air from the system providing a quiet, trouble free hot water heating system without the use of external devices
  • Extended flange coil is away from the boiler for easy accessibility, use of ribbed neck carriage bolts eliminates the problems encountered when a weld stud is broken during servicing, large coil plate allows for a greater gasket sealing area
  • Extended weld fittings of SA106-schedule 80 seamless pipe extend beyond the jacket and allow the service technician or homeowner to see small leaks that, if undetected, could later damage the boiler shell and void the warranty
  • Easy cleaning and maintenance accessibility to combustion areas and the open tubes make it easy for the service technician to thoroughly clean the boiler
  • Flush jacket, altitude, temperature and pressure gauge, ASME relief valve, thankless heater - 3 gpm, factory assembled, wired and packaged, 3450 RPM high-speed flame retention oil burner, interrupted primary ignition, hydronic triple aquastat relay, 007 circulator pump, brass boiler drain valve
Item#:
710-55
Manufacturer Item:
171536
Manufacturer:
THERMO DYNAMICS BOILER COMPANY
Williamson-Thermoflo OWT-3-T-S2-W Oil Fired Water Boiler with Tankless, 87% AFUE, 98 MBH Input
  • Enhanced control - temperature limit control, LWCO function, thermal pre-purge function
  • Rear flue outlet
  • Easy service - swing-away burner door, top access cleanout cover, plug-in wiring harness
  • High efficiency oil burner - solenoid valve, PSC motor, solid state igniter
  • Cast iron sections with built-in air separator
  • Insulated heavy gauge steel jacket
  • Factory tested, Taco 007 circulator, combination pressure/temperature gauge, 30 psig ASME relief valve, drain valve, barometric damper
  • Limited lifetime warranty on heat exchanger, 2 years limited warranty on parts
Item#:
OWT-3-T-S2-W
Manufacturer Item:
OWT-3-T-S2-W
Manufacturer:
WILLIAMSON -THERMOFLO
Williamson-Thermoflo GWA-105-N-T-S2-W Cast Iron Gas Fired Water Boiler, 82.9% AFUE, 105000 BTU/hr
  • Factory tested
  • Easy service - 1-piece access door, all controls in easy reach
  • High efficiency - flue baffles, stainless steel burners, automatic vent damper
  • Cast iron sections with built-in air separator
  • Insulated heavy gauge steel jacket
  • Spark ignited (intermittent) pilot system, electronic ignition/flame supervisory control
  • Vertical draft hood
  • Electrical junction box
  • 24 VAC combination gas valve
  • Combination relay receptacle and 40 VA transformer and plug-in circulator relay
  • Taco 007 circulator pump
  • High temperature limit control
  • 30 psig ASME relief valve
  • Combination pressure/temperature gauge
  • Limited lifetime warranty on heat exchanger and 1 year limited warranty on parts
Item#:
GWA-105-N-T-S2-W
Manufacturer Item:
GWA-105-N-T-S2-W
Manufacturer:
WILLIAMSON -THERMOFLO
Viessmann Vitodens 100-W B1HA 35 Stainless Steel Condensing Natural/LP Gas Equipped with a Viessmann stainless steel heat exchanger for lasting performance and reliability and a modulating matriX cylinder gas burner, the Vitodens 100-W wall mounted condensing boiler is the perfect combination of value, quality and Viessmann technology. Gas-fired wall-mounted condensing boiler with modulating stainless steel matriX cylinder burner, stainless steel inoxradial heat exchanger for room air independent operation (using a direct vent system) or room air dependent operation. B1KA comes equipped with an on demand hot water unit providing reliable hot water without a DHW tank.
Item#:
B1HA279
Manufacturer Item:
B1HA35
Manufacturer:
VIESSMANN MANUFACTURING INC.
Embassy Industries KCC-R Right End Cap
Sid Harvey Item #:KCC-R: Replaces Part #:'s : 2H974
Item#:
KCC-R
Manufacturer Item:
5612275128
Manufacturer:
EMBASSY INDUSTRIES
Panel-Track (KPT) baseboard is ideal for any type of residential or light commercial installation. With its rugged front panel, efficient operation, superior design and ease of installation, Panel-Track is the best baseboard in the industry. Today's Panel-Track is the culmination of more than 40 years of research and development by Embassy's heating specialists and engineers and is clearly the baseboard of choice by today's heating professionals.
  • Contemporary deep-drawn seamless end caps without unsightly weld spots
  • Panel-Track has a modern, streamlined design
  • The high-luster white finish blends beautifully with traditional and contemporary colors
  • Finger-touch snap-on damper opens and closes with ease, without the use of hinges which can bind or loosen with age
  • Easy to install heating element
  • One end of each heating element is expanded for simple end-to-end sweat connecting
  • Hanger brackets with built-in return
  • 3/4" copper tube with 2-1/8" x 2-1/8" x 0.008" aluminum fin
  • 60 fins/feet spacing
Sid Harvey Item #:KRP6: Replaces Part #:'s : 2H985
Item#:
KRP6
Manufacturer Item:
5612231206
Manufacturer:
EMBASSY INDUSTRIES
Thermo Dynamics Boilers HT-90/110 Steel 3-Pass Oil Fired Water Boiler, 84.2 - 85.1% AFUE, 126 - 154 MBH Input, 109 - 132 MBH Heating
  • A wet-base design, a horizontal tube and a 3-pass heat exchanger make this one of the most efficient boiler designs available
  • A 5 gpm tankless coil with a 30 gal boiler water content assures abundant hot water
  • Forced draft burner eliminates chimney draft problems
  • Multiple firing rates on the same unit
  • 1-piece boiler construction ensures years of trouble-free service and there are no push nipples or "O" rings to leak
  • Heat exchanger easily accessible for cleaning
  • The 85% AFUE rating is among the highest department of energy (DOE) ratings
  • Due to the horizontal tube and wet-base, the HT is remarkably quiet, the unit-flow path of combustion gases allows for smoother, quieter combustion than firebox, wet-leg designed boilers
  • Each boiler is constructed and hydrostatically tested in accordance with ASME boiler code, the capacity and efficiency are rated in accordance with the standards of the institute of boiler and radiator manufacturers (IBR)
  • Limited lifetime warranty
  • Built-in air scoop purges air from the system providing a quiet, trouble free hot water heating system without the use of external devices
  • Extended flange coil is away from the boiler for easy accessibility, use of ribbed neck carriage bolts eliminates the problems encountered when a weld stud is broken during service, the large coil plate allows for a greater gasket sealing area
  • Weld fittings extend beyond the jacket and allow the service technician or homeowner to see small leaks that, if undetected, could later damage the boiler shell and potentially void the warranty
  • Easy cleaning and maintenance accessibility to combustion areas and the open tubes make it easy for the service technician to thoroughly clean the boiler
  • No tight, pin-type passage ways with hidden nooks and crannies, making a thorough cleaning possible
  • A well-maintained boiler continues to perform at higher efficiency and is less likely to develop service problems
  • Factory mounted/wired burner and controls
  • Fully insulated heat exchanger with powder-coated cabinet
  • Equipped with triple aquastat, circulator and temperature/altitude gauge
  • (2) 1-1/2" return
Item#:
710-30
Manufacturer Item:
230211
Manufacturer:
THERMO DYNAMICS BOILER COMPANY
Weil-McLain 313-300-109 Left End Section for used on LGB Series gas Boilers
  • Sid Harvey Item #:313300109: Replaces Part #:'s : 22707
Item#:
313300109
Manufacturer Item:
313-300-109
Manufacturer:
WEIL-MCLAIN
|◀ 1 - 12 of 536 ▶|
View: