Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Utility Enterprises Plasti-Seal Gloo 12-992 PVC Cement, 16 oz, Clear

• Regular bodied, fast-set
• Recommended potable water and DWV (drain/waste/vent) systems

Sid Harvey Item #:12-992: Replaces Part #:'s : 10037

Polymer Adhesives Sealant Systems CADS-1 Fiber Reinforced Water Based Duct Sealant, 1 Gallon, Gray

• Fiber reinforced for additional strength
• Rated for high velocity HVAC systems
• Excellent mold and mildew resistance
• CADS may be used to seal all types of HVAC duct systems including metal, fiberglass, duct board and flex duct
• 18 months in unopened container shelf life

Utility Enterprises Plasti-Seal Gloo 12-991 PVC Cement, 8 oz, Clear

• Regular bodied, fast-set
• Recommended potable water and DWV (drain/waste/vent) systems

Sid Harvey Item #:12-991: Replaces Part #:'s : 10036

Utility Enterprises Plasti-Kleen 12-802 Plastic Pipe Primer, 8 oz Can with Dauber, Clear and Purple

Sid Harvey Item #:12-802: Replaces Part #:'s : 3K210

RectorSeal Tru-Blu pipe thread sealant with PTFE is a fast-dry, flexible set thread sealant designed for high vibration environments such as refrigeration and industrial applications. PTFE has been added to enhance thread lubrication during assembly and break out.

• Stays flexible designed for areas of high vibration and thermal expansion/contraction
• Brushable from 20 to 140 deg F
• Contains PTFE
• Excellent as a gasket adhesive on flanges
• For use with potable water (hot or cold)
• Low odor, non-separating
• Lead free and contains no other metals
• Lubricates and protects threads
• Easy application brush top applicator

Utility Enterprises Plasti-Seal Gloo 12-990 Regular Body Solvent Cement, 4 oz Dauber Top Can, Clear Gray White

Oatey 30753 Primer, 32 oz, Clear, 12/Pack

• Clear aggressive primer
• Low VOC solvent cement meets california south coast air quality management district (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld

Armaflex 520 Adhesive is an air-drying contact adhesive that is excellent for joining seams and butt joints of Armaflex pipe and sheet insulations for line temperatures up to 250 deg F. The golden color adhesive may also be used to apply Armaflex sheet insulation to flat or curved metal surfaces that will operate at temperatures up to 180 deg F.

• Air-drying, solvent-based contact adhesive for strong bonds and tight seams
• Formulated for Armaflex insulations
• Cure time - 36 hr at 250 deg F for insulated pipe, 36 hr at 180 deg F for insulated tanks and equipment
• Temperature limit - 250 deg F Armaflex pipe insulation seams and joints, 180 deg F full-bonding Armaflex sheet insulation
• 250/50 rates flame spread and smoke

Oatey 30758 Hi-Etch Primer For PVC and CPVC Pipe and Fittings, 32 oz,

3M Super 77 multipurpose spray adhesive to be an extremely versatile, fast-drying spray adhesive that bonds a wide range of lightweight materials. Its permanent bond provides fast results to keep projects moving ahead. Our photo-safe spray formula is easy to dispense and apply directly onto surfaces and materials where needed, with no soak-in or yellowing over time.

• Versatile adhesive that bonds a wide range of lightweight materials
• Provides professional, industrial strength for demanding applications
• Offers a fast, aggressive tack for a quick bond that reduces set time
• Bonds paper, cardboard, fabric, insulation, plastic, metal, wood and more
• Allows for a bond time of 15 sec - 30 min
• Repositionable while providing long-lasting strength
• 1 - 15 min open time

Sid Harvey Item #:F3-42A: Replaces Part #:'s : 14108

Armaflex 520 Adhesive is an air-drying contact adhesive that is excellent for joining seams and butt joints of Armaflex pipe and sheet insulations for line temperatures up to 250 deg F. The golden color adhesive may also be used to apply Armaflex sheet insulation to flat or curved metal surfaces that will operate at temperatures up to 180 deg F.

• Air-drying, solvent-based contact adhesive for strong bonds and tight seams
• Formulated for Armaflex insulations
• Cure time - 36 hr at 250 deg F for insulated pipe, 36 hr at 180 deg F for insulated tanks and equipment
• Temperature limit - 250 deg F Armaflex pipe insulation seams and joints, 180 deg F full-bonding Armaflex sheet insulation
• 250/50 rates flame spread and smoke

Blue Monster 1-step PVC cement is a self priming PVC pipe glue that requires no additional primer. Blue Monster's 1-step joining process simplifies installations by reducing labor and offers faster curing times before pressure testing. Ideal for under-the-sink jobs and home remodels. Use on all classes of rigid and flexible PVC pressure pipe, including schedule 80, up to 6" in diameter and 8" diameter on non-pressure rigid and flexible PVC pipe.

• Fast set, 1-step cement
• No primer required
• Suitable for all weather conditions
• Effective on wet or dry pipe
• Use in hot or cold temperatures
• Great for flexible PVC pipes
• Allows for Immediate pressure testing
• Eco-friendly low VOC