|◀ 1 - 12 of 145 ▶|
View:
Bell & Gossett 189134 Bearing Assembly with Impeller for Series 100 Circulating Pumps
Sid Harvey Item #:B74-1R: Replaces Part #:'s : B74-1R
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
B74-1R
Manufacturer Item:
189134
Manufacturer:
SID HARVEY REMANUFACTURED
Sid Harvey C434-9R Fan Limit Control, Remanufactured

  • What is a core Chrge?
    • CORE Charges vary by product.
    • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
    • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
    • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
C434-9R
Manufacturer Item:
C434-9
Manufacturer:
SID HARVEY REMANUFACTURED
High Limit Aquastat Relay 8F differential REMANUFACTURED. Immersion type controllers that combine high limit protection with switching relay control of burner and circulator motors
  • High limit opens burner circuit only.
  • Includes transformer and accessory terminals for adding a remote low limit controller.
  • Case available for horizontal or vertical mounting.
  • Requires a 24 VAC thermostat with heat anticipator set at 0.2 amps.
Sid Harvey Item #:C312-8R: Replaces Part #:'s : 0R257
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
C312-8R
Manufacturer Item:
L8148A1017
Manufacturer:
SID HARVEY REMANUFACTURED
Honeywell R8184G4009 Non-Recycle Oil Burner Control with Safety Timing, 120/220/240 VAC
  • Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
  • Solid state flame sensing circuit
  • LED on terminal strip indicates system lockout
  • Remote lockout indication
  • Enclosed safety switch with external reset butTon
  • Manual trip lever opens safety switch for system maintenance
  • Mounts on standard 4 x 4" junction box
  • C554A cadmium sulfide flame detector and 24 VAC thermostat required
  • With 15 sec safety timing, alarm outputs and manual safety switch
Sid Harvey Item #:R75-40R: Replaces Part #:'s : R75-39R | R75-40 | ICM150
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
R75-40R
Manufacturer Item:
R8184G4009
Manufacturer:
SID HARVEY REMANUFACTURED
Sid Harvey Remanufactured A39-321R Oil Burner Motor Beckett 3450 RPM 115 VAC PSC REMANUFACTURED
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
A39-321R
Manufacturer Item:
A39-321R
Manufacturer:
SID HARVEY REMANUFACTURED
Sid Harvey Remanufactured R75-41R Oil Burner Primary Control R8184G Plastic Box 15 Second REMANUFACTURED
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
R75-41R
Manufacturer Item:
R75-41R
Manufacturer:
SID HARVEY REMANUFACTURED
The Paragon 8000 series commercial defrost controls are designed for commercial freezers and refrigerators to provide automatic defrost capability. They accommodate various types of defrost systems including electric defrost heaters, hot gas, and compressor off cycle.
  • Positive slide bar switch design assures positive electrical contact and wipes the contact surface of contaminates
  • Temperature or pressure terminated models are designed to stop defrosting using an external temperature or pressure device
  • Safety back-up - mechanical time-driven defrost termination
  • Heavy-duty synchronous design drive motor
  • Choice of 3-contact arrangements
  • Adjustable frequency of defrost initiation from 1 - 6-cycles per day with a minimum of 4 hr between successive operations
  • Adjustable back-up defrost termination from 4 - 110 min in 2 min increments
  • Have an adjustable cut-in pressure dial calibrated from 36 - 110 lb for R12, R22, R502
  • Time initiated/temperature or pressure terminated
  • Open switch arrangement for contacts 1 - 3, closed switch arrangement for contacts 2 - 4, closed switch arrangements for contacts 3 - N
  • Electric heat, hot gas or compressor shutdown
  • 1 year limited warranty Paragon 8141-00 Heavy-Duty Steel Commercial Mechanical Defrost Control, 4 - 110 min, SPDT (1) NO - (2) NC, 120 VAC Electrical, 120 - 240 VAC Switch, 40 amp Sid Harvey Item #:C255-130R: Replaces Part #:'s : C255-130
    What is a core Chrge?
    • CORE Charges vary by product.
    • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
    • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
    • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
C255-130R
Manufacturer Item:
8141-00
Manufacturer:
SID HARVEY REMANUFACTURED
Malco precision fit and hardened magnetic hex chuck drivers, with 1/4" power insert shanks, meet on-the-job demands for performance and service life whether installed on a power drill or used with a Connect quick change handle. Hex driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.
Sid Harvey Item #:MSHL1/4: Replaces Part #:'s : 13388

Sid Harvey Remanufactured C354R

Item#:
C354R
Manufacturer Item:
PA404A1033
Manufacturer:
SID HARVEY REMANUFACTURED
Sid Harvey B76R Bearing Assembly 186863 1/2 Ib, 1-1/2 Bi, 2 Nfi, Hv Nfi BEARING,ASSY,186863
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
B76R
Manufacturer Item:
186863
Manufacturer:
SID HARVEY REMANUFACTURED
Sid Harvey Remanufactured C434-12R Fan limit Control 8'' REMANUFACTURED
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
C434-12R
Manufacturer Item:
C434-12R
Manufacturer:
SID HARVEY REMANUFACTURED
Honeywell L8124A High and Low Limit Circulator Triple Aquastat Relay, 120 VAC, 130 - 240 deg F Adjustable High Limit, 110 - 220 deg F Adjustable Low Limit
  • Immersion type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
  • Provide multi-zone control by using a separate circulator and R845 relay for each zone
  • Include diaphragm powerhead and micro switch assembly that respond to temperature changes in boiler water
  • Mount directly to boiler
  • Select models include large transformers and extra terminals for supplying power to low voltage zone valves
  • Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
Sid Harvey Item #:C317-2R: Replaces Part #:'s : AQU8124A1007-C317-2B | C317-2B | C317R
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
C317-2R
Manufacturer Item:
L8124A1007,1015,1098
Manufacturer:
SID HARVEY REMANUFACTURED
Sid Harvey Remanufactured A180-1R Motor Oil Burner M/F Series REMANUFACTURED
What is a core Chrge?
  • CORE Charges vary by product.
  • All Remanufactured items purchased will be assessed a CORE CHARGE at invoice based on product.
  • CORE CHARGES will be refunded when CORES are dropped off at store location or pickup arrangements are pre-arranged.
  • Bulk CORE pickups must be coordinated with local store managers or Sid Harvey Corporate Office.
Item#:
A180-1R
Manufacturer Item:
3005843
Manufacturer:
SID HARVEY REMANUFACTURED
|◀ 1 - 12 of 145 ▶|
View: