Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Bramec TEA-2420 Pipe Elbow, 3/4 x 5/8 Inch, Barb x MNPT, Nylon

Rathe Associates CR34CLAMP Stainless Steel Crimp Ring, 3/4 Inch, PEX Crimp (Barbed)

Supco Bullet BPV31 Piercing Valve, 1/4 Inch, Male Flare, 500 psi

• The only valve with a permanent type, patented gasket application
• A sealing force of over 180 Inch-lb, torque tested with 450 lb pressure tested at 250 deg F
• Patented valve gasket provides 50 times more sealing area than competitive o ring types
• Corrosion resistant
• Piercing needle is engineered for concentricity and hardness to insure perfect seating every time
• Non-positional mounting, no adapter valve required
• Requires only 2 Inch clearance for installation and operation
• Install on round suction lines or uneven tubing, Install on the high side as a permanent valve on site
• 1/4, 5/16 and 3/8 Inch outside diameter size
• Furnished with adapter sleeves for indicated multiple use applications
• Hex key wrench

Diversitech 701-043 White Nylon Adapter, 3/8 x 3/4 Inch, Barb x MIPT

• Nylon fittings have a good resistance to oils, gasoline, as well as organic solvents
• They also show long-time weathering resistance

Rathe Associates CR12CLAMP Stainless Steel Crimp Ring, 1/2 Inch, PEX Crimp (Barbed)

JB Industries A31998 Valve Core Remover, Plastic

• JB Industries A31998 Valve Core Remover, Plastic

JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces.

Sid Harvey Item #:W55-20: Replaces Part #:'s : MAW455 | 928-WASHER | W455

Bramec TAA-1212 Nylon Adapter, 3/8 Inch, MPT x Barb

Eastern Foundry & Fitting 11 88 Stainless Steel Pinch Clamp, 1/2 Inch, PEX

JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All valves are equipped with cap and one valve core (braze type, loosely assembled). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.

• Finger tight sealing for all male SAE connections
• Made in the USA

Bramec 0610 Nylon Hose Mender, 3/8 Inch, Barb