Thermo Pride OME-72D36 Steel Mobile Home Oil Furnace, 86% AFUE, 120 volt, 85000/70000 BTU Input, 72000/60000 BTU Output

• With Beckett AFG burner
• Durable reinforced interlocking steel casing with powder coated finish
• Highly efficient, 16-gauge aluminized steel Octatherm heat exchanger, top-quality control system, easy-access service port
• Foil-faced fiberglass insulation and high-efficiency, direct-vent oil burner
• Designed to fit many existing bases and optional combustion air connection, insulated blower compartment
• High torque, low speed, direct drive motor and easy access, easy cleaning, permanent, washable filter
• 12" width x 12" depth supply air outlet
• 14" height x 22" depth return air outlet
• 4" flue diameter
• Partitioned burner and blower compartments
• Pre-purge, post-purge, positively closing solenoid oil burner is safe and odor-free
• Intermittent ignition system

Thermo Pride VHF-ABP Powder Coated Highboy Oil Furnace, 85% AFUE, 120 volt, 106250/85000/70000 BTU Input, 90000/72000/60000 BTU Output

• With Beckett AFG burner
• Front flue
• Low profile
• Spirit furnaces are equipped with a multi speed direct drive blowing motor
• 4 Ton cooling capacity
• Entire blower assembly can be removed for cleaning
• Fully insulated cabinet to reduce energy loss
• 19" width x 19" depth supply air outlet
• 24" height x 14-1/4" depth return air outlet
• 7" flue diameter
• Preformed refractory chamber of ceramic fiber heats up quickly, re-radiates heat back into the fire providing more complete combustion, and cools down quickly after the burner stops
• Heavier metal and hand welded wrap around design provides smoother airflow for even heat, quieter operation, and 70 deg F nominal temperature rise for comfort

Williamson-Thermoflo CHB-105-DD-x-W-S2 Powder Coat Paint Oil Furnace, 85.9% AFUE, 91000/105000/119000 BTU Input, 79100/89400/101100 BTU Output, 1300 cfm

• Less burner
• Front flue with top or right side venting option
• Interior baffling for maximum efficiency
• 3.5 Ton cooling capacity
• Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
• Spring loaded observation port with test port
• 21" width x 20" depth supply air outlet
• 15" width x 22" depth return air outlet
• 6" flue diameter
• Heavy gauge burner mounting plate with studs and nuts
• Fully enclosed burner and controls
• Preformed slide out chamber for easy service

Thermo Products has listened to your concerns about comfort and has met your demands for the best, most reliable, and efficient furnaces. When you want to experience exceptional comfort, increased efficiency, and handcrafted quality along with the proven warranty of Thermo Pride, but have limited space, select the low profile OH6 oil furnace. Youll be sure to receive quiet, reliable, long lasting performance from your home heating system that is specifically designed to meet your homes needs. The OH6 is designed to fit nicely in your low ceiling basement since it is 11" shorter than a typical highboy furnace. Offered with a factory-standard PSC blower motor for high-reliability and factory-standard cost savings.

• The OH6 is offered with a factory-standard PSC blower motor for reliability and cost savings
• It is designed to fit nicely in your low ceiling basement since it is 11" shorter than a typical highboy furnace
• Compatible with the new more efficient air conditioners (the new AC evaporator coils are much taller than older coils)
• Features easier servicing due to improved heat exchanger cleanout locations, which also means a savings for you
• Utilizes the Thermo Pride 13 ga copper coated octatherm heat exchanger
• Front flue
• Highboy with psc direct drive blower motor
• Low profile burner in separate
• Burner in separate box

Williamson-Thermoflo CLB-105-DD-R-x-W-S2 Powder Coat Paint Oil Furnace, 85.9% AFUE, 91000/105000/119000 BTU Input, 79400/90200/101200 BTU Output, 1325 cfm

• Less burner
• Rear flue
• Interior baffling for maximum efficiency
• 3.5 Ton cooling capacity
• Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
• Spring loaded observation port with test port
• 18-1/2" width x 17-1/2" depth supply air outlet
• 18-1/2" width x 15-1/2" depth return air outlet
• 6" flue diameter
• Heavy gauge burner mounting plate with studs and nuts
• Heavy-gauge with seal-tite construction
• Preformed slide out chamber for easy service

Thermo Products has listened to your concerns about comfort and has met your demands for the best, most reliable, and efficient furnaces. When you want to experience exceptional comfort, increased efficiency, and handcrafted quality along with the proven warranty of Thermo Pride, but have limited space, select the low profile OH6 oil furnace. Youll be sure to receive quiet, reliable, long lasting performance from your home heating system that is specifically designed to meet your homes needs. The OH6 is designed to fit nicely in your low ceiling basement since it is 11" shorter than a typical highboy furnace. Offered with a factory-standard PSC blower motor for high-reliability and factory-standard cost savings.

• The OH6 is offered with a factory-standard PSC blower motor for reliability and cost savings
• It is designed to fit nicely in your low ceiling basement since it is 11" shorter than a typical highboy furnace
• Compatible with the new more efficient air conditioners (the new AC evaporator coils are much taller than older coils)
• Features easier servicing due to improved heat exchanger cleanout locations, which also means a savings for you
• Utilizes the Thermo Pride 13 ga copper coated octatherm heat exchanger
• Front flue
• Highboy with psc direct drive blower motor
• Low profile burner in separate
• Burner in separate box

Thermo Products VLR-CBP Oil Furnace Lo-Boy 70-117k BTU Output 85% AFUE 115

Thermo Pride OL6RA072D48 Lowboy Oil Furnace, 86.5 - 87% AFUE, 120 volt, 60000 - 90000 BTU, 400 cfm

• Rear flue
• High efficiency flame retention Beckett burner
• Dual service/clean-out ports placed for easy access
• 4 Ton cooling capacity
• Burner and controls enclosed in vestibule for safety and quiet operation
• Advanced high efficiency controls mounted at the front of cabinet for easy setup and access
• 18" width x 20" depth supply air outlet
• 18" height x 18" depth return air outlet
• 7" flue diameter
• Rounded corners and interlocking cabinet panels give added stability and quiet operation
• 13 ga octatherm heat exchanger delivers higher efficiency and combustion observation port for easy burner calibration
• 8-heat exchanger size identifier
• Exclusive copper coated heat exchanger provides corrosion resistance and superior heat transfer

Thermo Products VLF-CBP Oil Furnace Lo-Boy 70-117k BTU Output 85% AFUE 115

VLF-CBP Thermo Products

Williamson-Thermoflo CLB-105-DD-F-x-W-S2 Powder Coat Paint Oil Furnace, 85.9% AFUE, 91000/105000/119000 BTU Input, 79400/90200/101200 BTU Output, 1325 cfm

• Less burner
• Front flue
• Interior baffling for maximum efficiency
• 3.5 Ton cooling capacity
• Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
• Spring loaded observation port with test port
• 18-1/2" width x 17-1/2" depth supply air outlet
• 18-1/2" width x 15-1/2" depth return air outlet
• 6" flue diameter
• Heavy gauge burner mounting plate with studs and nuts
• Heavy-gauge with seal-tite construction
• Preformed slide out chamber for easy service

Thermo Pride VH8FA119P60B Highboy Oil Furnace, 85% AFUE, 120 volt, 156250/40000/119000 BTU Input, 132000/119000/101000 BTU Output

• With Beckett AFG burner
• Front flue
• Heavy duty 22 gauge cabinet with powder coated finish for long lasting durability
• Dual cleanout ports and 40 VA transformer and fan control are factory wired for easy add-on cooling installation
• 5 Ton cooling capacity
• No sharp edges folded and flattened and independent door removal
• Spirit oil furnaces are standard equipped with a multi-speed direct drive blower motor, The entire blower assembly can be removed for cleaning
• 20" width x 20" depth supply air outlet
• 23-3/4" height x 19" depth return air outlet
• 7" flue diameter
• The full cabinet foil faced high density fiberglass insulation reduces heat loss and sound levels