|◀ 1 - 12 of 456 ▶|
View:
The Packless COAX-2101-H coil is designed for 1 ton systems. Packless condenser and water-source-heat pump coils provide efficient heat transfer while minimizing fouling. This coil is apart of our classic line of coils. This particular model comes with mounting brackets. The inner tube of the COAX-2101-H is made from copper for maximum heat transfer potential.
  • Plus or minus 3/8 fraction decimal
Item#:
COAX2101H
Manufacturer Item:
COAX2101H
Manufacturer:
PACKLESS INDUSTRIES
Larkin LCA6135AETXV6B White Cabinet Low Profile Air Defrost Walk-In Unit Cooler with EC Motor and TXV Metering, 13500 BTU/hr, 2100 cfm
  • Opting for EC motors refrigeration system makes this product qualified to be included in the E-solutions product portfolio because of increased energy efficiency and cost savings
  • Ease of installation and service
  • Cabinet design features front access panels on each side for easy access to electrical and refrigeration components
  • All electrical components factory wired to terminal board and identified, making it easy to field wire the unit
  • Liquid line solenoid wire harness is factory installed for quick installation
  • Coil heater slots have been enlarged for easier installation and replacement
  • On 4-6 fan models, drain pan has a lanyard for easy and safe access, motors plug into wiring harness for easier servicing
  • Hot gas loop on bottom of coil for easier access is standard for hot gas defrost models
  • Reliable and durable-sweat connections to reduce potential for leaks
  • Molded fan guard design made of strong plastic material
  • Internal panels are isolated for quiet operation
  • Internally enhanced tubing and fin design for higher efficiency, reduced heater wattages
  • Fixed defrost termination for electric, adjustable defrost termination for hot gas
  • Extended drain pan heaters for more uniform defrost throughout the drain pan and additional heat in end compartments
  • Versatile-large diameter drain hole (3/4 Inch inside diameter) is located on the back of the unit
  • Minimal height of the low profile series makes it ideal for low ceiling coolers
  • Vintage
Item#:
LCA6135AETXV6B
Manufacturer Item:
LCA6135AETXV6B
Manufacturer:
HEATCRAFT REFRIGERATION PROD,
Copeland M6ZP-0053-IAA-177 Air Cooled Condenser, 1/2 hp, 115 VAC, 0 -
Item#:
M6ZP0053IAA177
Manufacturer Item:
M6ZP-0053-IAA-177
Manufacturer:
COPELAND
Tecumseh Celseon AE2415Z-AA1ASC Low Profile High Efficiency Maximum Cold
Item#:
AE2415Z-AA1ASC-OEM
Manufacturer Item:
32F328-59S
Manufacturer:
TECUMSEH PRODUCTS COMPANY
Larkin LCA690AB White Cabinet Low Profile Air Defrost Walk-In Unit Cooler with PSC Motor, 9000 BTU/hr, 1400 cfm
  • Opting for EC motors refrigeration system makes this product qualified to be included in the E-solutions product portfolio because of increased energy efficiency and cost savings
  • Ease of installation and service
  • Cabinet design features front access panels on each side for easy access to electrical and refrigeration components
  • All electrical components factory wired to terminal board and identified, making it easy to field wire the unit
  • Liquid line solenoid wire harness is factory installed for quick installation
  • Coil heater slots have been enlarged for easier installation and replacement
  • On 4 - 6 fan models, drain pan has a lanyard for easy and safe access, motors plug into wiring harness for easier servicing
  • Hot gas loop on bottom of coil for easier access is standard for hot gas defrost models
  • Reliable and durable - sweat connections to reduce potential for leaks
  • Molded fan guard design made of strong plastic material
  • Internal panels are isolated for quiet operation
  • Internally enhanced tubing and fin design for higher efficiency, reduced heater wattages
  • Fixed defrost termination for electric, adjustable defrost termination for hot gas
  • Extended drain pan heaters for more uniform defrost throughout the drain pan and additional heat in end compartments
  • Versatile - large diameter drain hole (3/4 Inch inside diameter) is located on the back of the unit
  • Minimal height of the low profile series makes it ideal for low ceiling coolers
  • Vintage
Item#:
LCA690AB
Manufacturer Item:
LCA690AB
Manufacturer:
HEATCRAFT REFRIGERATION PROD,
Heatcraft LHT010X6BFM Steel Outdoor Air Cooled Condenser, 1 hp, 208 - 230 VAC , 13960 BTU/hr
  • Microchannel coil technology standard
  • Painted steel cabinets for superior strength and corrosion protection
  • Heavy duty steel raised base with 1-1/2" leg
  • Fan guards and wiring conduit on indoor model
  • Suction service valves for hermetic and scroll compressors located outside the cabinet for quick installations, semi-hermetic compressor models have a suction valve on the compressor and an access fitting on the suction line entering the cabinet
  • Receiver with fusible plug, liquid shut-off valve and charging port is standard
  • Large electrical panel for ease of access
  • Pre-fabricated wiring harnesses for tight crimp connections and consistent labeling
  • Unit stays on if the hood is removed for servicing
  • Sight glass is easily viewable
  • All units are completely leak tested in a helium environment, bump tested and allowed to cycle off on the high and low pressure control, each unit has a copy of the run data shipped inside the electrical panel
  • Electrical circuits are completely checked for continuity
  • Piping is laid out to minimize stress and vibration and is pre-bent to eliminate leak
  • Encapsulated, auto-reset, high and low pressure controls to eliminate leaks (standard on all high and medium temperature models, adjustable low pressure control standard on low temperature models)
  • Horizontal air discharge
  • F denotes stock identifier
  • Extended temperature
Sid Harvey Item #:LHT010X6BFM: Replaces Part #:'s : AJA7494ZXDHL
Item#:
LHT010X6BFM
Manufacturer Item:
LHT010X6BFM
Manufacturer:
HEATCRAFT REFRIGERATION PROD,
Copeland M6KP-0102-CAV-072 Air Cooled Condenser, 1 hp, 230 VAC, 0 - 125600
Item#:
M6KP0102CAV072
Manufacturer Item:
M6KP-0102-CAV-072
Manufacturer:
COPELAND
Larkin LCA690AWMC6B White Cabinet Low Profile Air Defrost Walk-In Unit Cooler with PSC Motor, 9000 BTU/hr, 1400 cfm
  • Opting for EC motors refrigeration system makes this product qualified to be included in the E-solutions product portfolio because of increased energy efficiency and cost savings
  • Ease of installation and service
  • Cabinet design features front access panels on each side for easy access to electrical and refrigeration components
  • All electrical components factory wired to terminal board and identified, making it easy to field wire the unit
  • Liquid line solenoid wire harness is factory installed for quick installation
  • Coil heater slots have been enlarged for easier installation and replacement
  • On 4 - 6 fan models, drain pan has a lanyard for easy and safe access, motors plug into wiring harness for easier servicing
  • Hot gas loop on bottom of coil for easier access is standard for hot gas defrost models
  • Reliable and durable - sweat connections to reduce potential for leaks
  • Molded fan guard design made of strong plastic material
  • Internal panels are isolated for quiet operation
  • Internally enhanced tubing and fin design for higher efficiency, reduced heater wattages
  • Fixed defrost termination for electric, adjustable defrost termination for hot gas
  • Extended drain pan heaters for more uniform defrost throughout the drain pan and additional heat in end compartments
  • Versatile - large diameter drain hole (3/4 Inch inside diameter) is located on the back of the unit
  • Minimal height of the low profile series makes it ideal for low ceiling coolers
  • Sporlan R-404A expansion valve
  • Vintage
  • Air defrost (35 deg F room) will be C charged
  • Mechanical room thermostat
  • Emerson solenoid valve with dual voltage coil
Item#:
LCA690AWMC6B
Manufacturer Item:
LCA690AWMC6B
Manufacturer:
HEATCRAFT REFRIGERATION PROD,
Heatcraft LHT008X6BFM Steel Outdoor Air Cooled Condenser, 3/4 hp, 208 - 230 VAC , 7070 BTU/hr
  • Microchannel coil technology standard
  • Painted steel cabinets for superior strength and corrosion protection
  • Heavy duty steel raised base with 1-1/2" leg
  • Fan guards and wiring conduit on indoor model
  • Suction service valves for hermetic and scroll compressors located outside the cabinet for quick installations, semi-hermetic compressor models have a suction valve on the compressor and an access fitting on the suction line entering the cabinet
  • Receiver with fusible plug, liquid shut-off valve and charging port is standard
  • Large electrical panel for ease of access
  • Pre-fabricated wiring harnesses for tight crimp connections and consistent labeling
  • Unit stays on if the hood is removed for servicing
  • Sight glass is easily viewable
  • All units are completely leak tested in a helium environment, bump tested and allowed to cycle off on the high and low pressure control, each unit has a copy of the run data shipped inside the electrical panel
  • Electrical circuits are completely checked for continuity
  • Piping is laid out to minimize stress and vibration and is pre-bent to eliminate leak
  • Encapsulated, auto-reset, high and low pressure controls to eliminate leaks (standard on all high and medium temperature models, adjustable low pressure control standard on low temperature models)
  • Horizontal air discharge
  • F denotes stock identifier
  • Extended temperature
Item#:
LHT008X6BFM
Manufacturer Item:
LHT-008-X6BFM
Manufacturer:
HEATCRAFT REFRIGERATION PROD,
The Packless COAX-2076-H coil is designed for 3/4 ton systems. Packless condenser and water-source-heat pump coils provide efficient heat transfer while minimizing fouling. This coil is apart of our classic line of coils. This particular model comes with mounting brackets. The inner tube of the COAX-2076-H is made from copper for maximum heat transfer potential.
  • Plus or minus 3/8 fraction decimal
Item#:
COAX2076H
Manufacturer Item:
COAX2076H
Manufacturer:
PACKLESS INDUSTRIES
Copeland XFAM-030Z-CFV Steel Base Air Cooled Outdoor Welded Condensing
Item#:
XFAM030ZCFV081
Manufacturer Item:
XFAM-030Z-CFV-081
Manufacturer:
COPELAND
Copeland FFAP-015Z-CFV Steel Base Air Cooled Welded Condensing Unit, 1-1/2 hp, 15600 BTU/hr at 45 deg F, 208 - 230 VAC, R-22, R-134A, R-404A, R-407C
  • Multiple refrigerant
  • General 3-lead single voltage, 6-lead part winding (575 volt), 9-lead dual voltage compressor motor
  • Internal inherent protection - 1-protector (line break) compressor motor protection
  • Bill of material - receiver with valve, fan guard, end covers, conduit, pressure control, filter drier, moisture indicator
  • Reliability, high energy efficiency
  • Low sound and vibration level
  • Advanced diagnostics and protection features faster trouble-shooting, warranty reduction
  • Factory installed EK filter drier and HMI moisture indicator fewer the leaks, reduced callbacks, lower installation costs, increased equipment reliability, lower warranty
  • Modular components
  • Replacement serviceability
  • Multi refrigerant approval for high/medium models
  • Application flexibility, inventory consolidation
  • Copeland scroll compressors on all models
Item#:
FFAP-015Z-CFV-072
Manufacturer Item:
FFAP-015Z-CFV-072
Manufacturer:
COPELAND
|◀ 1 - 12 of 456 ▶|
View: