Brand Name
Accessory Type
View:
Zephyr Components ZPB140 Pressure Washer Port-A-Blast
Item#:
ZPB140
Manufacturer Item:
ZPB140
Manufacturer:
SEALED UNIT PARTS CO, INC
For spraying coil cleaners such as Nu-Brite, CalClean, HD CalClean, Alka-Brite Plus, Tri-Pow'r HD or any of the other quality Nu-Calgon coil cleaners for cleaning air cooled condensers, evaporator coils, etc. No pre-mixing is necessary as chemical and water are automatically blended in mixing head as you spray. Use for coil cleaning as well as in food preparation areas, wash rooms, or any situation where use of water-diluted chemicals are required.
  • The coil gun probe provides easy access for inside out cleaning of coils
  • Recommended water pressure 40 - 60 psi
  • Quick-disconnect feature
  • Foam wand to enhance foaming
  • Deflector tip to fan out spray
  • Connects to optional coil gun probe accessory (4774-1) for 90 deg direction of spray inside the coil
Sid Harvey Item #:4774-0: Replaces Part #:'s : 4814
Item#:
4774-0
Manufacturer Item:
4774-0
Manufacturer:
NU-CALGON
Fujitsu FO3613CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 13 SEER 208/230/1 R410A 3 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.
Item#:
FO3613CSJNA
Manufacturer Item:
FO3613CSJNAA
Manufacturer:
FUJITSU
Root-Lowell Manufacturing 1985SHA Industrial Chemical Sprayer, 0.5 Gallon
  • Solid brass nozzle discharges 50 GPM at 40 psi
  • Oil and chemical resistant valves and gaskets
  • ViTon seals for resistance to chemicals and corrosion
  • Wide base for greater stability
  • Brass flow control with lock-on seal for continuous spraying
  • Strain relief spring on hose prevents kinking
Item#:
F1-38
Manufacturer Item:
1002
Manufacturer:
SID HARVEY INDUSTRIES INC.
Root-Lowell Manufacturing 1993SH Industrial Chemical Sprayer with 14" Wand, 3 Gallon
  • Solid brass nozzle discharges 50 GPM at 40 psi
  • Oil and chemical resistant valves and gaskets
  • ViTon seals for resistance to chemicals and corrosion
  • Wide base for greater stability
  • Brass flow control with lock-on seal for continuous spraying
  • Strain relief spring on hose prevents kinking
Item#:
F1-37
Manufacturer Item:
1993SH
Manufacturer:
SID HARVEY INDUSTRIES INC.
Fujitsu FO2413CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 13 SEER 208/230/1 R410A 2 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.
Item#:
FO2413CSJNA
Manufacturer Item:
FO2413CSJNAB
Manufacturer:
FUJITSU
Fujitsu FO3013CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 13 SEER 208/230/1 R410A 2-1/2 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.
Item#:
FO3013CSJNA
Manufacturer Item:
FO3013CSJNAA
Manufacturer:
FUJITSU
B&G Equipment 30-P Chemical Sprayer 3 Gallon 30" Hose
Item#:
30-P
Manufacturer Item:
30-P
Manufacturer:
B&G EQUIPMENT COMPANY
Conveniently straightens and cleans condenser and evaporator fins. Each nylon head slides into the master handle and tightens in place. Heads are designed to fit units with fin spacing of 4-24 fins per". Each head is engraved with its own size and is color coded for fast identification. Heads are angled so that when inserted in the handle, the hand is a safe distance from the sharp fins. Heads may also be reversed in the handle so that combing with an upward stroke (recommended method) may be done easily with proper leverage. The master handle rests comfortably in a man-size grip, is rigid and long lasting.
  • (1) handle and (6) 8, 9, 10, 11, 12, 14 heads
Sid Harvey Item #:T645-20: Replaces Part #:'s : 23716
Item#:
T645-20
Manufacturer Item:
T-100
Manufacturer:
DIVERSITECH CORP.
Speed Clean CoilJet CJ-125 Direct Drive Diaphragm Portable HVAC Coil Cleaner System, 12 VDC, 12 amp, 0.6 gpm
  • Separate water and chemical tanks
  • A long life rechargeable battery
  • Applies coil cleaner and then flush with fresh water Carries all the water and coil cleaner you need to clean up to 5, 5 Ton units using 125 psi pressure
  • Separate on-board water and cleaner tanks eliminate the need for dragging hoses or bulky pump sprayers to clean coils
Item#:
CJ-125
Manufacturer Item:
CJ-125
Manufacturer:
SPEED CLEAN
Mini Split Bib Kit replacement bib is a high quality replacement for your original bib. It quickly and easily installs onto your existing mounts so you can get back to work quickly. Made of high quality components, the Mini split bib Kit replacement bib can be used over and over again.
  • High grade 10 mil plastic
  • Sonic welding on seams
  • Reusable
  • 12 feet drain (perfect for those installations way up high)
Item#:
MSB-01
Manufacturer Item:
MSB-01
Manufacturer:
SPEED CLEAN
Nu-Calgon 4150-01 Mini-Split Clean Wall Guard Medium 12K Units
Item#:
4150-01
Manufacturer Item:
4150-01
Manufacturer:
NU-CALGON
View: