Brand Name
Part Type
Length
Width
Height
View:
Diversitech EP2424-2 Enviropad A/C Condenser Pad
  • 24" x 24" x 2"
  • The 2 thick EcoPad is the choice for plastic pads, unless a thicker pad (3) is required by the local building code
Item#:
EP2424-2
Manufacturer Item:
EP2424-2
Manufacturer:
CONDENSER PADS
Diversitech HPR-6 Heat Pump Riser 6" Heat Pump & Air Handler Polypropylene Gray
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.
Item#:
HPR-6
Manufacturer Item:
HPR-6
Manufacturer:
DIVERSITECH CORP.
Northfield Block Co. Solid Cement Block
  • 16" L x 8" W x 4"
Item#:
BLOCK4INSOLID
Manufacturer Item:
4INSOLID
Manufacturer:
NORTHFIELD BLOCK CO.
Diversitech EP3030-2 Enviropad A/C Condenser Pad
  • 30" x 30" x 2"
  • The 2 thick EcoPad is the choice for plastic pads, unless a thicker pad (3) is required by the local building code
Item#:
EP3030-2
Manufacturer Item:
EP3030-2
Manufacturer:
CONDENSER PADS
Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultraviolet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.
Item#:
X3232211
Manufacturer Item:
X3232211
Manufacturer:
CONDENSER PADS
Diversitech HPR-3 1-Piece Heat Pump Riser
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.
Item#:
HPR-3
Manufacturer Item:
HPR-3
Manufacturer:
DIVERSITECH CORP.
Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultraviolet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.
Item#:
X3636211
Manufacturer Item:
X3636211
Manufacturer:
CONDENSER PADS
Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultraviolet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.
Item#:
X2436211
Manufacturer Item:
X2436211
Manufacturer:
CONDENSER PADS
Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultraviolet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.
Item#:
X3030211
Manufacturer Item:
X3030211
Manufacturer:
CONDENSER PADS
Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultraviolet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.
Item#:
X3636311
Manufacturer Item:
X3636311
Manufacturer:
CONDENSER PADS
Diversitech EP3636-2 Enviropad A/C Condenser Pad
  • 36" x 36" x 2"
  • The 2 thick EcoPad is the choice for plastic pads, unless a thicker pad (3) is required by the local building code
Item#:
EP3636-2
Manufacturer Item:
EP3636-2
Manufacturer:
DIVERSITECH CORP.
Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultraviolet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.
Item#:
X3232311
Manufacturer Item:
X3232311
Manufacturer:
CONDENSER PADS
View: