Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Air Gaps for Reduced Pressure Zone Assemblies provide an unobstructed, physical separation between the discharge end of a potable water supply line and an open receiving vessel. The installation of an air gap and drain line are recommended on reduced pressure zone assemblies. Air Gaps can be installed vertically or horizontally.

• The installation of an air gap and drain line are recommended

Webstone Valve 74004 Forged Brass Air Separator , 1", FIP, 150 psi

• Air separator with removable vent head and coalescing medium
• Reduces noise
• Improves system efficiency and operation
• Reduces wear on system components
• Requires no regular maintenance
• Fewer call backs
• The air separator must be installed in a straight run of horizontal piping and positioned precisely upright
• Designated lengths of straight piping before and after the unit are not required
• Neither side is designated as an inlet or outlet; the flow may be directed in either direction
• Brass lower body, upper body, body cap, body cap ring, vent cap, vent cap washer, vent pin assembly, oat alignment pin
• Stainless steel vent spring, vent/float arm assembly, baffle, mesh
• EPDM vent o-ring, body cap o-ring, body o-ring
• Plastic float

Caleffi 5027 Automatic Air Vent, 1/8", MPT, 150 psi Working, 240 deg F, Brass

• Automatic air vents are designed to remove trapped air that accumulates in heating and air conditioning systems automatically
• Air removal enhances performance and life of a system by reducing the effects of corrosion due to oxygen, pockets of air trapped in the heating emitters and cavitation in the circulation pumps
• These automatic air vents eliminate residual air in heating and air conditioning systems without the need for manual intervention
• This prevents undesired noise, wear of devices in the circuits and inefficient performance of heating units
• 90 psi maximum discharge pressure
• 1.75 scfm max discharge rate

Caleffi MixCal 521510A Brass 3-Way Adjustable Thermostatic and Pressure Balanced Mixing Valve with Temperature Gauge, 3/4", NPT

• Maintain the temperature of the mixed water supplied to the user at a constant set value when there are variations in the supply pressure and temperature of the incoming hot and cold water or in the flow rate
• Locking setpoint knob
• Maximum inlet pressure ratio 2:1
• Plus or minus 3 deg F temperature stability
• Maximum recommended differential pressure 20 psi
• 0.25% maximum weighted average low lead content
• Minimum temperature difference between hot water inlet and mixed water outlet should be 27 deg F
• Stainless steel spring, peroxide-cured EPDM seal, Shutter, seats and sliding guides - PPO

The Webstone TMV is designed for use in heating as well as domestic water systems and provides outlet temperatures ranging between 95 deg F - 131 deg F. The valve may be positioned in any orientation, designated lengths of straight piping before and after the unit are not required. The Webstone Thermostatic Mixing Valve is a SAFETY VALVE. Inspect the TMV at least once per year to verify it is operating correctly. It may be necessary to check the valve more frequently in installations with poor or unknown water quality. Use of a filter or strainer is required for installations with poor or unknown water quality.

• Temperature locking handle ensures appropriate output range
• Union connections simplify installation and maintenance
• Guaranteed for life
• 2:1 Maximum inlet pressure ratio
• Brass end cap, spindle, union fitting, union nut
• Stainless steel spindle spring, locking screw
• EPDM o-ring
• Plastic locking ring, adjustment cap
• Wax filled copper element
• Fiber H gasket
• Brass HCP pisTon

Cash Acme 24644 DZR Brass Thermostatic Mixing Valve Kit for HeatGuard Tank Booster Pro Water Heaters, 3/4", NPSH (Inlet) x MPT (Outlet) x FNPT Union

• Precise temperature control safer hot water from all outlets
• Allows the water heater to be set at 140 deg F or higher greater effective hot water volume and less chance of Legionella within the cylinder
• Every valve is tested for performance prior to shipping specify and install with confidence
• Robust, low complexity construction superior reliability, improved user safety
• Integral recirculation port allows quick and neat installations in systems with recirculation
• More hot water from the same water heater
• Stainless steel spring
• Brass internal cap
• Engineered polymer pisTon
• Noryl GFN2 guide tube
• Included braided hose and temperature gauge Cash Acme tank booster is a temperature actuated mixing valve that mixes hot water with cold to deliver tempered water at a controlled temperature to 120 deg F. The Tank Booster is intended for installation at the water heater to distribute controlled temperature water through hot water systems in residential and commercial applications. The Tank Booster is a high quality mixing valve incorporating the latest in thermostatic technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed for distribution applications. The Tank Booster incorporates a fast-acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure. The Tank Booster is designed for easy and quick installation and is shipped complete with the valve, flexible connector and water heater tee. Can be used with SharkBite flexible water heater connectors for easy installation while using Copper, PEX, or CPVC tubing. Does not require any transition fittings.

Honeywell SuperVent PV-001RP/U Replacement Air Vent Assembly

• Universal connection

Caleffi Discal 59829 Replacement Air Vent Assembly for Discal Brass 551 Series (Except Compact)

• Straight body style