S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
INTERNATIONAL COMFORT PRODUCTS FXM4X4200AL
Item#:
FXM4X4200AL
Manufacturer Item:
FXM4X4200AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Variable speed compressor operates at 5 stages with capacity range as wide as 25 - 100%
Electronic expansion valve (EXV) for precise heating control
High pressure switch
Suction pressure transducer
Pressure equalizer valve for easy starting
Compressor discharge temperature sensor
Coil temperature sensor
Copper tube/aluminum fin coil
Internal crankcase heater standard
Suction line accumulator factory installed
PERFORMANCE
Up to 13.0 EER and 11 HSPF
Integrated inverter control enables 5-state operation with a communicating control.
Also capable of 2-stage operation with 2-stage thermostat
Self-configuring installation with the Ion System Control
Compact ECM fan motor driven by integrated inverter control
Outdoor temperature sensor factory installed
High performance compressor sound shield standard
Isolation compressor grommets
Enhanced dehumidification
Item#:
HVH860GKA
Manufacturer Item:
HVH860GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Mortex H41-46-26-A1BC Air Handler Hot Water Hydronic 1-1/2-2 Ton 115 VAC
- Upflow, Horizontal (right to left)
- Drain pans are manufactured of durable, non-corrosive plastic, and meet ASHRAE standards for IAQ. Pans are"dry" thus holding minimum water.
- Drain pans have primary and secondary drains for either left or right hand connections.
- Cabinet is heavy gauge embossed Gallonvanized steel substrate, with front and top panels pre-painted a durable neutral gray.
- All units are equipped with factory installed time delay relay as standard.
- All units have 1 foil faced insulation.
- All units include a 1" throw away filter.
- All electric heat units are 208/230/1/60 All hydronic heat units are 115/1/60.
- Standard units with 12 KW electric heat or larger have a factory installed circuit breaker (UL Requirement). All units 10 KW and smaller may be ordered with or without the circuit breaker option.
- All units are suitable for"0"" clearance to combustible materials.
- Electric heat units are field convertible to downflow with factory conversion kit.
- Blower assembly slides out for easy maintenance.
- Refrigeration coil connections are swaged and then factory sealed with copper caps to maintain a nitrogen holding charge.
- All hydronic units include a freeze protection switch.
- All hydronic units include a compressor lockout switch.
Item#:
H41-46-26-A1BC
Manufacturer Item:
H41-46-26-A1BC
Manufacturer:
MORTEX PRODUCTS, INC.
REFRIGERATION CIRCUIT
Variable speed compressor operates at 5 stages with capacity range as wide as 25 - 100%
Electronic expansion valve (EXV) for precise heating control
High pressure switch
Suction pressure transducer
Pressure equalizer valve for easy starting
Compressor discharge temperature sensor
Coil temperature sensor
Copper tube/aluminum fin coil
Internal crankcase heater standard
Suction line accumulator factory installed
PERFORMANCE
Up to 13.0 EER and 11 HSPF
Integrated inverter control enables 5-state operation with a communicating control.
Also capable of 2-stage operation with 2-stage thermostat
Self-configuring installation with the Ion System Control
Compact ECM fan motor driven by integrated inverter control
Outdoor temperature sensor factory installed
High performance compressor sound shield standard
Isolation compressor grommets
Enhanced dehumidification
Item#:
HVH836GKA
Manufacturer Item:
HVH836GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Scroll compressors on all models
Suction line accumulator factory installed
Biflow filterdrier included for field installation
Integrated solid state control with TimeTemperature Defrost
Low pressure switch
Copper tube / aluminum fin coil
EASY TO INSTALL AND SERVICE
Easy access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R410A refrigerant
BUILT TO LAST
Bakedon powder coat finish over galvanized steel
Postpainted (black) coil fins
Coated, weatherresistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for
extra protection
Item#:
NXH648GKP
Manufacturer Item:
NXH648GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
- Copeland Scroll compressors on all models
- Suction line accumulator factory installed
- Bi- flow filter- drier included for field installation
- Integrated solid state control with Time- Temperature Defrost
- Low pressure switch
- Copper tube/aluminum fin coil
- Easy Access service valves on all models
- External high and low refrigerant service ports
- Only two screws to access control panel
- Factory charged with R410A refrigerant
- Baked- on powder coat finish over Gallonvanized steel
- Post- painted (black) coil fins
- Coated, weather- resistant cabinet screws
- Coated inlet grille with 3/8grille spacing for extra protection
- 5 year compressor limited warranty
- 5 year parts limited warranty (including compressor and coil) - With timely registration, an additional 5 year parts limited warranty (including compressor and coil
Item#:
NXH660GKP
Manufacturer Item:
NXH660GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
- Copeland Scroll compressors on all models
- Suction line accumulator factory installed
- Bi- flow filter- drier included for field installation
- Integrated solid state control with Time- Temperature Defrost
- Low pressure switch
- Copper tube/aluminum fin coil
- Easy Access service valves on all models
- External high and low refrigerant service ports
- Only two screws to access control panel
- Factory charged with R410A refrigerant
- Baked- on powder coat finish over Galvanized steel
- Post- painted (black) coil fins
- Coated, weather- resistant cabinet screws
- Coated inlet grille with 3/8grille spacing for extra protection
- 5 year compressor limited warranty
- 5 year parts limited warranty (including compressor and coil) - With timely registration, an additional 5 year parts limited warranty (including compressor and coil)
Item#:
NXH530GKP
Manufacturer Item:
NXH530GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Quiet performance Single-stage compressor operation Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating Durably built to withstand bad weather and debris Designed for corrosion resistance and lasting performance Single-speed fan motor System protecting high and low-pressure switches and filter drier Durable, protective inlet grille panels allow easy coil cleaning Baked-on powder coat finish over Gallonvanized steel Compatible with humidity sensing thermostats Suction line accumulator factory installed Bi-flow filter-drier included for field installation Integrated solid state control with time-temperature defrost High and low pressure switches Copper tube/aluminum fin coil Easy access service valves External high and low refrigerant service ports Only two screws to access control panel Post-painted (black) coil fins Coated, weather-resistant cabinet screws Coated inlet grille with 3/8" spacing for extra protection
Item#:
N4H430GKP
Manufacturer Item:
N4H430GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
2- stage scroll compressors on all models
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
Low pressure switch
Copper tube / aluminum fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
Baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
Item#:
N4H624GKP
Manufacturer Item:
N4H624GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Scroll compressors on all models
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
Low pressure switch
Round tube / aluminum plate fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
Baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
Item#:
N4H418GKP
Manufacturer Item:
N4H418GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Scroll compressors on all models
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
Low pressure switch
Round tube / aluminum plate fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
Baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
Item#:
N4H436GHP
Manufacturer Item:
N4H436GHP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
- Scroll compressors on all models
- Suction line accumulator factory installed
- Integrated solid state control with TimeTemperature Defrost
- High and Low pressure switches
- Copper tube / aluminum fin coil
- Easy Access service valves on all models
- External high and low refrigerant service ports
- Only two screws to access control panel
- Factory charged with R410A refrigerant
- Painted cabinet finish over Gallonvanized steel
- Coated inlet grille with 3/8 spacing standard (hail guard)
- 5 year compressor limited warranty Use of the AHRI Certified TM Mark indicates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .
- 5 year parts limited warranty (including compressor and coil) With timely registration, an additional 5 year parts limited warranty (including compressor and coil) * For owner occupied, residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications
Item#:
R4H418GKP
Manufacturer Item:
R4H418GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS