Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 517 - 528 of 1167 ▶ ▶|
View:

Air Handler Multi-Position 3 Ton 208/230 1225 CFM R454B 53-7/16" H x 21-1/8" W x 22-1/16" D

  • Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control
  • Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-oz.one depleting properties of our previous refrigerant.
  • Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety
  • Efficiency-optimizing Thermostatic Expansion Valve (TXV)
  • Compatible with two-stage outdoor units
  • Enhanced heat pump heating comfort with higher temperature delivery
  • Corrosion-resistant all-aluminum coil
  • Convenient washable filter
  • Air purifier and dehumidifier compatible
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacteria buildu

    International Comfort Products FCM4X4800AL

    • Item#:
    FCMA5B36L0CA
    Manufacturer Item:
    FCMA5B36L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCMA5B36L0CA_Broc

    Air Handler 7-1/2 Ton 460/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

    Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.



    International Comfort Products FAX091H2AA0AUA

    • Item#:
    FAX091L2AA0AUA
    Manufacturer Item:
    FAX091L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAX091L2AA0AUA_Spec

    Air Handler Multi-Position 4 Ton 208/230 VAC TXV R410A 21"

    FEATURES:
    Smart Diagnostics
  • Self configuring (ease of installation)
  • Easier troubleshooting, providing faster service and repair
  • Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)
  • Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
    Technology
  • R-410A refrigerant chlorine-free, non-ozone depleting
  • Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

    International Comfort Products FCMA5B60L0DA

    • Item#:
    FCMB4B48L0CA
    Manufacturer Item:
    FCMB4B48L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCMB4B48L0CA_Spec

    Air Handler Multi-Position Piston 1-1/2 Ton 208/230 VAC Installed TXV 42-11/16" H x 14-5/16" W x 22-1/6" D

  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness


    International Comfort Products FCMB4X24L0BA

    • Item#:
    FEM4P1800AL
    Manufacturer Item:
    FEM4P1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FEM4P1800AL_Spec

    Air Handler 10 Ton 208/230/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

    Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.



    International Comfort Products FAX091L2AA0AUA

    • Item#:
    FAX120H2AA0AUA
    Manufacturer Item:
    FAX120H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAX120H2AA0AUA_Spec

    Air Handler Apartment Fan Coil Upflow Only 2 Ton 208/230 R545B PSC Motor TXV, 5 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L2400AL

    • Item#:
    FMA5L2405AL
    Manufacturer Item:
    FMA5L2405AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Apartment Fan Coil Upflow Only 1.5 Ton 208/230 R545B TXV,PSC,Wallhung

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW
  • 208/230-1-60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • Puron Advance refrigerant, TXV standard

    International Comfort Products FMA4X3600AL

    • Item#:
    FMA5L1800AL
    Manufacturer Item:
    FMA5L1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Heat Pump 20 Ton 230/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 89 W x 283/16 L

  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.



    International Comfort Products FHS180LAAA2AUA

    • Item#:
    FHS240HAAA2AUA
    Manufacturer Item:
    FHS240HAAA2AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHS240HAAA2AUA_Spec

    Air Handler Commercial Heat Pump 10 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.



    International Comfort Products FHX091L2AA0AUA

    • Item#:
    FHX120H2AA0AUA
    Manufacturer Item:
    FHX120H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX120H2AA0AUA_Spec

    Air Handler Commercial Heat Pump 6 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.



    International Comfort Products FHS240HAAA2AUA

    • Item#:
    FHX072H2AA0AUA
    Manufacturer Item:
    FHX072H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX072H2AA0AUA_Spec

    Air Handler Multi-Position 3 Ton ECM R454B TXV 17" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X36L0BA

    • Item#:
    FHMA5X36L0BA
    Manufacturer Item:
    FHMA5X36L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X36L0BA_Broc

    Air Handler Commercial Heat Pump 7-1/2 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.



    International Comfort Products FHX072H2AA0AUA

    • Item#:
    FHX091H2AA0AUA
    Manufacturer Item:
    FHX091H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX091H2AA0AUA_Spec
    |◀ ◀ 517 - 528 of 1167 ▶ ▶|
    View: