Evaporator Coil Cased 5 Ton W/Power-V Technology Upflow/Downflow 24" R454B

The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.

The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.

All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.

Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.

This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

International Comfort Products EVD5X60M21A

Item#:

EVD5X60M24A

Manufacturer Item:

EVD5X60M24A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

EVD5X_SPEC

Electric Heater 7.5 KW

International Comfort Products Fast Heating Parts EHK308B Electric Heater 7.5 KW

International Comfort Products Fast Heating Parts EHK205B

Item#:

EHK308B

Manufacturer Item:

EHK308B

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

Air Handler 6 Ton Dual Circuit 230/3 CFM 2250-3750 4'-8" L x 2'-4" H x 3'-6-3/4" D

Multi-position design for horizontal or vertical installation without modification

Two sloped condensate pans on each unit for horizontal or vertical applications

Standard sloped drain pans and cleanable insulation treatedwith Environmental Protection
Agency (EPA) registered antimicrobial agent improves indoor air quality

High-static design meets a wider range of applications thancompetitive packaged air handler lines

Ultra low leak economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities

Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120-336 sizes

Dual circuit can be field modified for use on single circuit condensers

Cooling coils with mechanically bonded fins provide peak heat transfer

Optional 2-speed indoor fan with VFD controller

Standard factory-installed thermostatic expansion valve (TXV) with removable power element

Easy maintenance - removal of single panel allows access to virtually all components

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available

24-volt terminal block for control wiring connection

Hot water coil, steam coil, and electric heat accessories are available

International Comfort Products FAL180H1AA2AUA

Item#:

FAS072HAAA2A0A

Manufacturer Item:

FAS072HAAA2A0A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FAS072HAAA2A0A_Spec

Air Handler Multi-Position 5 Ton 208/230 1750 CFM R454B 59-3/16" H x 24-11/16" W x 22-1/16" D

Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control

Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-oz.one depleting properties of our previous refrigerant.

Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety

Efficiency-optimizing Thermostatic Expansion Valve (TXV)

Compatible with two-stage outdoor units

Enhanced heat pump heating comfort with higher temperature delivery

Corrosion-resistant all-aluminum coil

Convenient washable filter

Air purifier and dehumidifier compatible

Fully insulated cabinet

Corrosion-free sloped drain pan design helps reduce mold and bacteria buildu

International Comfort Products FCMA5B48L0CA

Item#:

FCMA5B60L0DA

Manufacturer Item:

FCMA5B60L0DA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FCMA5B60L0DA_Broc

Air Handler 10 Ton 460/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

INTERNATIONAL COMFORT PRODUCTS FAX120L2AA0AUA

Item#:

FAX120L2AA0AUA

Manufacturer Item:

FAX120L2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FAX120L2AA0AUA_Spec

Air Handler Multi Position 2 Ton 230/208 VAC R454B 42-11/16" H x 17-5/8" W x 22-1/16" D

Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control

Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-oz.one depleting properties of our previous refrigerant.

Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety

Efficiency-optimizing Thermostatic Expansion Valve (TXV)

Compatible with two-stage outdoor units

Enhanced heat pump heating comfort with higher temperature delivery

Corrosion-resistant all-aluminum coil

Convenient washable filter

Air purifier and dehumidifier compatible

Fully insulated cabinet

Corrosion-free sloped drain pan design helps reduce mold and bacteria buildu

ICP Fast Heating Parts CRTWOPOS011A00

Item#:

FCMA5X24L0BA

Manufacturer Item:

FCMA5X24L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FCMA5X24L0BA_Broc

Air Handler 15 Ton Dual Circuit 230/3 Unpainted 7'-5" L x 2'-4" H x 4'-8" D