Air Handler Heat Pump 20 Ton 230/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 89 W x 283/16 L

Multiposition design for horizontal or vertical installation without modification

Two sloped condensate pans on each unit for horizontal or vertical applications

Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality

High-static design meets a wide range of applications than competitive package air handler lines

Economizer accessory provides ventilations air and free cooling

Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers

Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes

Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes

High efficiency copper tube / aluminum coils

Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element

Easy maintenance removal of single panel allows access to virtually all components

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available

24volt terminal block for control wiring connection.

Hot water coil, steam coil, and electric heat accessories are available.

International Comfort Products FHS240HAAA2AUA

Item#:

FHS240HAAA2AUA

Manufacturer Item:

FHS240HAAA2AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHS240HAAA2AUA_Spec

Air Handler Apartment Fan Coil Upflow Only 1.5 Ton 208/230 R545B ECM Motor TXV

1-1/2, 2, 2-1/2, and 3 Tons

Upflow application only

Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

208/230/1/60 supply voltage

Cabinet exterior is galvanized sheet metal

Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

Insulated for conditioned space (not to be installed in unconditioned spaces)

All Aluminum coils

FMA4P

For use with R410A refrigerant utilizing standard piston

FMA4X

R410A refrigerant, TXV standard

PSC motor on all FMA4P

ECM motor on all FMA4X

Motor suspended on rubber grommets for quieter operation

Fresh air intake knockouts in cabinet

Units fits between standard stud spacings

All service access is located in the front

Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

No returnair ductwork required in specific applications

Wall hanging brackets included with the unit

International Comfort Products FMA5X1800AL

Item#:

FMA5X1800AL

Manufacturer Item:

FMA5X1800AL

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FMA5-Series_Spec

Air Handler Multi-Position 2 Ton ECM R454B TXV 21" Singlar

Refrigerant leak detection dissipation system for added safety

Multi-tap ECM (electronic commutating motor) motors all sizes

Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board

Five available speed tags to meet a wide range of applications

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Construction innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Pre-painted galvanized steel cabinet

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations

Horizontal hanging provisions on cabinet

Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter

Easy plug-in provisions for heater installation

Factory installed thermostatic expansion valve, TXV, on all coils

Designed for manufactured housing applications

FHMA5X24L0BA

Item#:

FHMA5X24L0BA

Manufacturer Item:

FHMA5X24L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHMA5X24L0BA_Broc

Air Handler Multi-Position 4 Ton ECM R454B TXV 21" Singlar

Refrigerant leak detection dissipation system for added safety

Multi-tap ECM (electronic commutating motor) motors all sizes

Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board

Five available speed tags to meet a wide range of applications

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Construction innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Pre-painted galvanized steel cabinet

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations

Horizontal hanging provisions on cabinet

Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter

Easy plug-in provisions for heater installation

Factory installed thermostatic expansion valve, TXV, on all coils

Designed for manufactured housing applications

FHMA5X48L0CA

Item#:

FHMA5X48L0CA

Manufacturer Item:

FHMA5X48L0CA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHMA5X48L0CA_Broc

Air Handler Commercial Heat Pump 10 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX120H2AA0AUA

Item#:

FHX120H2AA0AUA

Manufacturer Item:

FHX120H2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX120H2AA0AUA_Spec

Air Handler Multi-Position 3.5 Ton ECM R454B TXV 22" Singlar

Refrigerant leak detection dissipation system for added safety

Multi-tap ECM (electronic commutating motor) motors all sizes

Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board

Five available speed tags to meet a wide range of applications

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Construction innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Pre-painted galvanized steel cabinet

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations

Horizontal hanging provisions on cabinet

Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter

Easy plug-in provisions for heater installation

Factory installed thermostatic expansion valve, TXV, on all coils

Designed for manufactured housing applications

FHMA5X42L0CA

Item#:

FHMA5X42L0CA

Manufacturer Item:

FHMA5X42L0CA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHMA5X42L0CA_Broc

Air Handler Commercial Heat Pump 6 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L