Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 529 - 540 of 1167 ▶ ▶|
View:

Air Handler Apartment Fan Coil Upflow Only 3 Ton 208/230 R545B PSC Motor TXV

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L3010AL

    • Item#:
    FMA5L3600AL
    Manufacturer Item:
    FMA5L3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA5-Series_Spec

    Air Handler Multi-Position TXV 4 Ton 208/230 R410A ECM Motor Installed Metering Device 53-7/16" H x 21-1/8" W x 22-1/16" D

    Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-Flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications


    International Comfort Products FJMA4B42L0CB

    • Item#:
    FJMA4B48L0CB
    Manufacturer Item:
    FJMA4B48L0CB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4B48L0CB_Spec

    Air Handler Apartment Fan Coil Upflow Only 2 Ton 208/230 R545B PSC Motor TXV, 7.5 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L2405AL

    • Item#:
    FMA5L2408AL
    Manufacturer Item:
    FMA5L2408AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Apartment Fan Coil Upflow Only 2.5 Ton 208/230 R545B PSC Motor TXV, 5 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW
  • 208/230-1-60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • Puron Advance refrigerant, TXV standard

    International Comfort Products FMA5L3000AL

    • Item#:
    FMA5L3005AL
    Manufacturer Item:
    FMA5L3005AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Commercial Heat Pump 10 Ton 460/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.



    International Comfort Products FHX120H2AA0AUA

    • Item#:
    FHX120L2AA0AUA
    Manufacturer Item:
    FHX120L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX120L2AA0AUA_Spec

    Air Handler Apartment Fan Coil Upflow Only 2.5 Ton 208/230 R545B PSC Motor TXV, 7.5 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L3005AL

    • Item#:
    FMA5L3008AL
    Manufacturer Item:
    FMA5L3008AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Multi-Position 3.5 Ton ECM R454B TXV 21" Modulating

    STANDARD FEATURES
  • Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes.
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board.
  • Five available speed tags to meet a wide range of applications.
  • Large, grooved tube, louvered fin coils.
  • Efficient, quiet, time-tested blower housings and diffusers.
  • Sturdy, drainable condensate pans.
  • Construction innovations designed to prevent cabinet sweating.
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements.
  • Super-thick R-4.2 insulation with vapor barrier.
  • Pre-painted galvanized steel cabinet (dark grey).
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations..
  • Horizontal hanging provisions on cabinet.
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter.
  • 3 through 30 kW accessory heaters - field installed.
  • Easy plug-in provisions for heater installation.
  • Entry options for high and low voltage wiring hook-up.
  • Leak-preventing sweat connections.
  • Factory installed thermostatic expansion valve, TXV, on all coils.
  • Designed for manufactured housing applications
    • Item#:
    FHMA5B42L0CA
    Manufacturer Item:
    FHMA5B42L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5B42L0CA
    FHMA5B42L0CA_Broc

    Air Handler Multi-Position TXV 4 Ton 208/230 R410A ECM Motor Installed Metering Device 59-3/16" H x 24-11/16" W x 22-1/6" D

    Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-Flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications


    International Comfort Products FJMA4B48L0CB

    • Item#:
    FJMA4B60L0DB
    Manufacturer Item:
    FJMA4B60L0DB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4B60L0DB_Spec

    Air Handler Multi-Position 2 Ton ECM R454B TXV 21" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X24L0BA

    • Item#:
    FHMA5X24L0BA
    Manufacturer Item:
    FHMA5X24L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X24L0BA_Broc

    Air Handler Multi-Position 4 Ton ECM R454B TXV 21" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X48L0CA

    • Item#:
    FHMA5X48L0CA
    Manufacturer Item:
    FHMA5X48L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X48L0CA_Broc

    Air Handler Multi-Position 3.5 Ton ECM R454B TXV 22" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X42L0CA

    • Item#:
    FHMA5X42L0CA
    Manufacturer Item:
    FHMA5X42L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X42L0CA_Broc

    Air Handler Multi-Position 4 Ton ECM R454B TXV 21" Modulating

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5B48L0CA

    • Item#:
    FHMA5B48L0CA
    Manufacturer Item:
    FHMA5B48L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5B48L0CA_Broc
    |◀ ◀ 529 - 540 of 1167 ▶ ▶|
    View: