Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 541 - 552 of 1167 ▶ ▶|
View:

Air Handler Multi-Position 1.5 Ton ECM R454B TXV 14" Single Stage

Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X18L0AA

    • Item#:
    FHMA5X18L0AA
    Manufacturer Item:
    FHMA5X18L0AA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X18L0AA_Broc

    Air Handler Apartment Fan Coil Upflow Only 2 Ton 208/230 R545B PSC Motor TXV

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L1800AL

    • Item#:
    FMA5L2400AL
    Manufacturer Item:
    FMA5L2400AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA5-Series_Spec

    Air Handler Multi-Position 5 Ton ECM R454B TXV 24" Modulating

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5B60L0DA

    • Item#:
    FHMA5B60L0DA
    Manufacturer Item:
    FHMA5B60L0DA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5B60L0DA_Broc

    Air Handler Heat Pump 15 Ton 460/3 R410A Horizontal Multi-Position and Verticall 56-1/16 H x 89 W x 283/16 L

  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.



    International Comfort Products FHS180HAAA2AUA

    • Item#:
    FHS180LAAA2AUA
    Manufacturer Item:
    FHS180LAAA2AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHS180LAAA2AUA_Spec

    Air Handler Multi-Position 2.5 Ton ECM R454B TXV 21" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X30L0BA

    • Item#:
    FHMA5X30L0BA
    Manufacturer Item:
    FHMA5X30L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X30L0BA_Broc

    Air Handler Apartment Fan Coil Upflow Only 2.5 Ton 208/230 R545B PSC Motor TXV

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L2410AL

    • Item#:
    FMA5L3000AL
    Manufacturer Item:
    FMA5L3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA5-Series_Spec

    Air Handler Commercial Heat Pump 7-1/2 Ton 460 /3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.



    International Comfort Products FHX091H2AA0AUA

    • Item#:
    FHX091L2AA0AUA
    Manufacturer Item:
    FHX091L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX091L2AA0AUA_Spec

    Air Handler Apartment Fan Coil Upflow Only 2.5 Ton 208/230 R545B PSC Motor TXV, 10 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L3008AL

    • Item#:
    FMA5L3010AL
    Manufacturer Item:
    FMA5L3010AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Apartment Fan Coil Upflow Only 2 Ton 208/230 R545B PSC Motor TXV, 10 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L2408AL

    • Item#:
    FMA5L2410AL
    Manufacturer Item:
    FMA5L2410AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Apartment Fan Coil Upflow Only 3 Ton 230/1 R454B PSC Motor TXV

  • MULTIFAMILY CEILING MOUNT FAN COIL
  • FMU5Z and FMC5Z 1-1/2, 2, 2-1/2, and 3 Tons
  • FMU5X and FMC5X 1-1/2, 2, 2-1/2, and 3 Tons All Models
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40VA, 208/230V-1-60 transformer
  • All models use R-454B refrigerant and have a hard-shutoff TXV metering device
  • Adjustable condensate drain pan FM(C,U)5X, FM(C,U)5Z
  • Horizontal return applications require field fabricated bottom cover
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
  • Cabinets insulated to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing Performance
  • PSC motor on all FMU5X & FMC5X models
  • ECM motor on all FMU5Z & FMC5Z models Easy To Install Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibility
  • Primary and secondary drain connections exit from the back or side of the cabinet
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU5X, FMC5X, FMC5Z, and FMU5Z models with AL in the 10th & 11th position

    International Comfort Products FMC5X2400AL

    • Item#:
    FMC5X3000AL
    Manufacturer Item:
    FMC5X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Apartment Fan Coil Upflow Only 2 Ton 208/230 R545B ECM Motor TXV, 5 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5X2400AL

    • Item#:
    FMA5X2405AL
    Manufacturer Item:
    FMA5X2405AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Mult-Position 2-Stage 2 Ton 208/230 TXV R410A 42-11/16" H x 17-5/8" L x 22" D

    FEATURES
  • Environmentally Balanced Refrigerant Technology
  • R-410A, chlorine-free, non-ozone depleting refrigerant
  • Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant
  • Energy Efficient Operation
  • Variable Speed Constant Airflow ECM (Electronically Commutating Motor) operates efficiently at all speeds
  • Maximizes efficiency of heating and cooling systems
  • Ultra low power consumption during fan only operation
    Indoor Weather Control
  • Warm, comfortable heating air temperatures
  • Unmatched humidity control, especially with thermostat with relative humidity controls
  • Airflow and Sound Technology
  • Diffuser air discharge section for high airflow efficiency and quiet, smooth operation
  • High duct static capability
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and cabinet air leakage less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Condensate Control and Disposal Technology
  • Minimal standing waterless microbial growth for improved IAQ and reduced condensate line clogging and related condensate leakage
  • Condensate fittings relocated away from turbulent airflow patterns at the blower entrance for improved condensate control performance
  • Overflow feature for slope coil units allows condensate to exit the unit without damage to product under clogged primary and secondary line conditions
  • Tested for condensate disposal at conditions much more severe than those required by AHRI
  • Primary and secondary drain connections to comply with HUD
  • All pans constructed of an injection molded glass-filled polycarbonate
    engineered resin material, with brass drain connections.
  • High density, super thick cabinetry insulation with vapor barrier



    International Comfort Products FTMA4B60L0DA

    • Item#:
    FTMA4X24L0BA
    Manufacturer Item:
    FTMA4X24L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FTMA4X24L0BA_Spec
    |◀ ◀ 541 - 552 of 1167 ▶ ▶|
    View: