Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 553 - 564 of 1197 ▶ ▶|
View:

Air Handler 3 Ton 36K BTU Horizontal ECM Motor TXV R410A 10-1/4" H x 49-1/4" W x 26-3/8" D

Features
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40 VA 208/230-1-60 supply voltage
  • All Models use R-410A TXV metering device
  • All Aluminum coils
  • Adjustable condensate drainpan
  • FMC4X & FMC4Z
  • Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing
  • PSC motor on all FMU4X & FMC4X models
  • ECM motor on all FMU4Z & FMC4Z models
  • Easy to Install and Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibilty Primary and secondary drain connections exit from the back or side of the cabinet.
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU4X &
  • FMC4X models with "AL" in the 10th and 11th position of model number

    International Comfort Products FMC4Z3600AL

    • Item#:
    FMC4Z3600AL
    Manufacturer Item:
    FMC4Z3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMC4X-FMC4Z-ICP_Install

    Air Handler Apartment Fan Coil Upflow Only 3 Ton 208/230 R545B PSC Motor TXV

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L3600AL

    • Item#:
    FMA5L3600AL
    Manufacturer Item:
    FMA5L3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA5-Series_Spec

    Air Handler Ceiling Mount 1.5 Ton 208/230 R454B TXV ECM Motor Uncased 10-1/4" H x 26-3/8" W x 37-1/4" D

    MULTIFAMILY CEILING MOUNT FAN COIL
  • FMU5Z and FMC5Z 1-1/2, 2, 2-1/2, and 3 Tons
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40VA, 208/230V-1-60 transformer
  • All models use Puron Advance, R-454B refrigerant and have a hard-shutoff TXV metering device
  • Adjustable condensate drain pan FM(C,U)5X, FM(C,U)5Z
  • Horizontal return applications require field fabricated bottom cover
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
  • Cabinets insulated to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing Performance
  • PSC motor on all FMU5X & FMC5X models
  • ECM motor on all FMU5Z & FMC5Z models Easy To Install Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibility
  • Primary and secondary drain connections exit from the back or side of the cabinet
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU5X, FMC5X, FMC5Z, and FMU5Z models with AL in the 10th & 11th position
    • Item#:
    FMU5X1800AL
    Manufacturer Item:
    FMC5Z3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMU5_SPEC
    FMU5X_SPEC

    Air Handler Multi-Position TXV 4 Ton 208/230 R410A ECM Motor Installed Metering Device 53-7/16" H x 21-1/8" W x 22-1/16" D

    Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-Flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications

    International Comfort Products FJMA4B48L0CB

    • Item#:
    FJMA4B48L0CB
    Manufacturer Item:
    FJMA4B48L0CB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4B48L0CB_Spec

    Air Handler Apartment Fan Coil Upflow Only 2 Ton 208/230 R545B PSC Motor TXV, 7.5 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L2408AL

    • Item#:
    FMA5L2408AL
    Manufacturer Item:
    FMA5L2408AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Apartment Fan Coil Upflow Only 3 Ton 230/1 R454B PSC Motor TXV

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW
  • 208/230-1-60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • Puron Advance refrigerant, TXV standard

    International Comfort Products FMA5L3610AL

    • Item#:
    FMA5L3610AL
    Manufacturer Item:
    FMA5L3610AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Apartment Fan Coil Upflow Only 2 Ton 208/230 R545B ECM Motor TXV

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5X2400AL

    • Item#:
    FMA5X2400AL
    Manufacturer Item:
    FMA5X2400AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA5-Series_Spec

    Air Handler Apartment Fan Coil Upflow Only 2.5 Ton 208/230 R545B PSC Motor TXV, 5 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW
  • 208/230-1-60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • Puron Advance refrigerant, TXV standard

    International Comfort Products FMA5L3005AL

    • Item#:
    FMA5L3005AL
    Manufacturer Item:
    FMA5L3005AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Ceiling Mount 3 Ton 208/230 R454B TXV ECN Motor

  • MULTIFAMILY CEILING MOUNT FAN COIL
  • FMU5Z and FMC5Z 1-1/2, 2, 2-1/2, and 3 Tons
  • FMU5X and FMC5X 1-1/2, 2, 2-1/2, and 3 Tons All Models
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40VA, 208/230V-1-60 transformer
  • All models use R-454B refrigerant and have a hard-shutoff TXV metering device
  • Adjustable condensate drain pan FM(C,U)5X, FM(C,U)5Z
  • Horizontal return applications require field fabricated bottom cover
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
  • Cabinets insulated to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing Performance
  • PSC motor on all FMU5X & FMC5X models
  • ECM motor on all FMU5Z & FMC5Z models Easy To Install Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibility
  • Primary and secondary drain connections exit from the back or side of the cabinet
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU5X, FMC5X, FMC5Z, and FMU5Z models with AL in the 10th & 11th position

    International Comfort Products FMC5X3600AL

    • Item#:
    FMC5X3600AL
    Manufacturer Item:
    FMC5X3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC

    Air Handler Commercial Heat Pump 10 Ton 460/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FHX120L2AA0AUA

    • Item#:
    FHX120L2AA0AUA
    Manufacturer Item:
    FHX120L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX120L2AA0AUA_Spec

    Air Handler Apartment Fan Coil Upflow Only 2.5 Ton 208/230 R545B ECM Motor TXV

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5X3000AL

    • Item#:
    FMA5X3000AL
    Manufacturer Item:
    FMA5X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA5-Series_Spec

    Air Handler Apartment Fan Coil Upflow Only 2.5 Ton 208/230 R545B PSC Motor TXV, 7.5 KW

  • 1-1/2, 2, 2-1/2, and 3 Tons
  • Upflow application only
  • Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
  • 208/230/1/60 supply voltage
  • Cabinet exterior is galvanized sheet metal
  • Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
  • Insulated for conditioned space (not to be installed in unconditioned spaces)
  • All Aluminum coils
  • FMA4P
  • For use with R410A refrigerant utilizing standard piston
  • FMA4X
  • R410A refrigerant, TXV standard
  • PSC motor on all FMA4P
  • ECM motor on all FMA4X
  • Motor suspended on rubber grommets for quieter operation
  • Fresh air intake knockouts in cabinet
  • Units fits between standard stud spacings
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
  • No returnair ductwork required in specific applications
  • Wall hanging brackets included with the unit

    International Comfort Products FMA5L3008AL

    • Item#:
    FMA5L3008AL
    Manufacturer Item:
    FMA5L3008AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMA_SPEC
    |◀ ◀ 553 - 564 of 1197 ▶ ▶|
    View: