Brand Name
BTU
Voltage
Position
|◀ ◀ 49 - 60 of 208 ▶ ▶|
View:

Air Handler Commercial Heat Pump 10 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.

    FHX120H2AA0AUA

    • Item#:
    FHX120H2AA0AUA
    Manufacturer Item:
    FHX120H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX120H2AA0AUA_Spec

    Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSTT2421SJZTNAB05

    • Item#:
    FHFSTT2421SJZTNAB05
    Manufacturer Item:
    FHFSTT2421SJZTNAB05
    Manufacturer:
    FUJITSU
     
    FHFSTT2421SJZTNAB05_Spec

    Air Handler 3 Ton Multi Position 120/1 PSC Motor

  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    FUJITSU FHRNTT3617SAZTNA

    • Item#:
    FHRNTT3617SAZTNA
    Manufacturer Item:
    FHRNTT3617SAZTNA
    Manufacturer:
    FUJITSU
     
    FHRNTT3617SAZTNA_Spec

    Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSTT2421SJZTNAB08

    • Item#:
    FHFSTT2421SJZTNAB08
    Manufacturer Item:
    FHFSTT2421SJZTNAB08
    Manufacturer:
    FUJITSU
     
    FHFSTT2421SJZTNAB08_Spec

    Air Handler Commercial Heat Pump 6 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.

    INTERNATIONAL COMFORT PRODUCTS FHX072H2AA0AUA

    • Item#:
    FHX072H2AA0AUA
    Manufacturer Item:
    FHX072H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX072H2AA0AUA_Spec

    Air Handler Ceiling Mount 1.5 Ton 208/230 R454B TXV ECM Motor Uncased

    MULTIFAMILY CEILING MOUNT FAN COIL
  • FMU5Z and FMC5Z 1-1/2, 2, 2-1/2, and 3 Tons
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40VA, 208/230V-1-60 transformer
  • All models use Puron Advance, R-454B refrigerant and have a hard-shutoff TXV metering device
  • Adjustable condensate drain pan FM(C,U)5X, FM(C,U)5Z
  • Horizontal return applications require field fabricated bottom cover
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
  • Cabinets insulated to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing Performance
  • PSC motor on all FMU5X & FMC5X models
  • ECM motor on all FMU5Z & FMC5Z models Easy To Install Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibility
  • Primary and secondary drain connections exit from the back or side of the cabinet
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU5X, FMC5X, FMC5Z, and FMU5Z models with AL in the 10th & 11th position
    • Item#:
    FMU5Z1800AL
    Manufacturer Item:
    FMU5Z1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMU5_SPEC

    Air Handler Multi-Position 3 Ton ECM R454B TXV 17" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X36L0BA

    • Item#:
    FHMA5X36L0BA
    Manufacturer Item:
    FHMA5X36L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X36L0BA_Broc

    Air Handler Commercial Heat Pump 7-1/2 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.

    International Comfort Products FHX091H2AA0AUA

    • Item#:
    FHX091H2AA0AUA
    Manufacturer Item:
    FHX091H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX091H2AA0AUA_Spec

    Air Handler Ceiling Mount 2 Ton 208/230 R454B TXV ECM Motor Uncased 10-1/4" H x 26-3/8" W x 37-1/4" D

    Horizontal application only
    Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
    40VA, 208/230V-1-60 transformer
    All models use Puron Advance, R-454B refrigerant and have a hard-shutoff TXV metering device
    Adjustable condensate drain pan

    FMU5X2400AL

    Item#:
    FMU5X2400AL
    Manufacturer Item:
    FMU5X2400AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Air Handler 3 Ton 1-Stage PSC Motor R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    Fujitsu FHRNPS3617SJZTNA

    • Item#:
    FHRNPS3617SJZTNA
    Manufacturer Item:
    FHRNPS3617SJZTNA
    Manufacturer:
    FUJITSU
     
    FHRNPS3617SJZTNA_Broc

    Air Handler 2 Ton 3 Stage ECM Motor R410A

  • Constant CFM Motor: When paired with the EcoNet® Smart Thermostat, the motor gradually auto-adjusts from low capacity to 100% of capacity to meet comfort requirements  allowing for ultimate humidity control, quieter sounds levels and year-round energy savings When paired with a 24V two-stage thermostat, the air handler runs in 3-speeds to match airflow with outdoor unit
  • Diagnostics  Easy & Quick Diagnostics & Ongoing Monitoring with Bluetooth®2 Technology & EcoNet®: With the BluArch & EcoNet® Apps, built-in technology makes monitoring, troubleshooting and repairing the product easier than ever before The Fujitsu Line with the BluArch App via Bluetooth® technology, features up to 62% faster overall diagnostics over other residential HVAC brands1
  • No Dip Switches = Fast Seamless Final Installation: The Fujitsu Line, with BluArch App-based commissioning via Bluetooth® technology, features up to 54% faster installation over other residential HVAC brands*
  • New Fujitsu Air Handler Control Board (AHC): Enables constant CFM airflow  Introduces Bluetooth® connectivity for access to advanced diagnostic information from the Contractor App on your mobile device  Maintains EcoNet® diagnostics for remote access when shared by the homeowner
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Quieter Sound Levels: Provided by sturdy cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193

    FHRNVV2417SJZTCA

    • Item#:
    FHRNVV2417SJZTCA
    Manufacturer Item:
    FHRNVV2417SJZTCA
    Manufacturer:
    FUJITSU
     
    FHRNVV2417SJZTCA_Spec

    Air Handler 3 Ton 1-Stage PSC Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All standard air handler models are only 36" [915mm] in height
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSPS3624SJZTNAB10

    • Item#:
    FHFSPS3624SJZTNAB10
    Manufacturer Item:
    FHFSPS3624SJZTNAB10
    Manufacturer:
    FUJITSU
     
    FHFSPS3624SJZTNAB10_Spec
    |◀ ◀ 49 - 60 of 208 ▶ ▶|
    View: