Error

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

Home > A/C Equipment > Blower Coils Air Handlers

Brand Name

BTU

Voltage

Position

|◀ ◀ 61 - 72 of 235 ▶ ▶|

View:

Compare

Air Handler Multi-Position 2 Ton 208/230 VAC TXV R410A 17"

FEATURES:
Smart Diagnostics

Self configuring (ease of installation)

Easier troubleshooting, providing faster service and repair

Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)

Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
Technology

R-410A refrigerant chlorine-free, non-ozone depleting

Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

International Comfort Products FCMB4X24L0BA

Item#:

FCMB4X24L0BA

Manufacturer Item:

FCMB4X24L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FAX091L2AA0AUA

Compare

Air Handler 7-1/2 Ton 460/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FAX091L2AA0AUA

Item#:

FAX091L2AA0AUA

Manufacturer Item:

FAX091L2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FAX091L2AA0AUA_Spec

FCMB4B48L0CA

Compare

Air Handler Multi-Position 4 Ton 208/230 VAC TXV R410A 21"

FEATURES:
Smart Diagnostics

Self configuring (ease of installation)

Easier troubleshooting, providing faster service and repair

Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)

Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
Technology

R-410A refrigerant chlorine-free, non-ozone depleting

Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

International Comfort Products FCMB4B48L0CA

Item#:

FCMB4B48L0CA

Manufacturer Item:

FCMB4B48L0CA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FCMB4B48L0CA_Spec

FAX120H2AA0AUA

Compare

Air Handler 10 Ton 208/230/3 Unpainted 4'-8" L x 2'-4" H x 3'-6-3/4" D

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FAX120H2AA0AUA

Item#:

FAX120H2AA0AUA

Manufacturer Item:

FAX120H2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FAX120H2AA0AUA_Spec

FHRNPS-SERIES

Compare

Air Handler 4 Ton Multipoise TXV R410A 120 VAC 21" PSC Motor 21" W x 50-1/2" H x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHRNPS4821SJZTNA

Item#:

FHRNPS4821SJZTNA

Manufacturer Item:

FHRNPS4821SJZTNA

Manufacturer:

FUJITSU

FHRNPS4821SJZTNA_Broc

FHRNPS4821SJZTNA_Spec

FHSERIESAIRHANDLER

Compare

Air Handler 4 Ton 1-Stage PSC Motor R410A

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces

Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility

Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE Standard 193

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

FUJITSU FHRNPS4221SJZTNA

Item#:

FHRNPS4221SJZTNA

Manufacturer Item:

FHRNPS4221SJZTNA

Manufacturer:

FUJITSU

FHRNPS4221SJZTNA_Broc

FHS240HAAA2AUA

Compare

Air Handler Heat Pump 20 Ton 230/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 89 W x 283/16 L

Multiposition design for horizontal or vertical installation without modification

Two sloped condensate pans on each unit for horizontal or vertical applications

Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality

High-static design meets a wide range of applications than competitive package air handler lines

Economizer accessory provides ventilations air and free cooling

Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers

Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes

Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes

High efficiency copper tube / aluminum coils

Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element

Easy maintenance removal of single panel allows access to virtually all components

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available

24volt terminal block for control wiring connection.

Hot water coil, steam coil, and electric heat accessories are available.

International Comfort Products FHS240HAAA2AUA

Item#:

FHS240HAAA2AUA

Manufacturer Item:

FHS240HAAA2AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHS240HAAA2AUA_Spec

FHSMTT3621SAZTNAN00

Compare

Air Handler 3 Ton 2-Stage Constant Torque R410A 21" W x 50-1/2" x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHSMTT3621SAZTNAN00

Item#:

FHSMTT3621SAZTNAN00

Manufacturer Item:

FHSMTT3621SAZTNAN00

Manufacturer:

FUJITSU

FHSMTT3621SAZTNAN00_Spec

FHRNTT3617SJZTNA

Compare

Air Handler Multi-Position 3 Ton Constant Torque TXV 208/230 17-1/2" W x 42-1/2" H x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHRNTT3617SJZTNA

Item#:

FHRNTT3617SJZTNA

Manufacturer Item:

FHRNTT3617SJZTNA

Manufacturer:

FUJITSU

FHRNTT3617SJZTNA_Spec

FHX120H2AA0AUA

Compare

Air Handler Commercial Heat Pump 10 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX120H2AA0AUA

Item#:

FHX120H2AA0AUA

Manufacturer Item:

FHX120H2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX120H2AA0AUA_Spec

FHSERIESAIRHANDLER

Compare

Air Handler 3 Ton Multi Position 120/1 PSC Motor

Front or Bottom Return with aluminum tube and fin coil

Flow Check Piston for cooling or heat pump operation

Wall-hanging brackets

Built in Filter Rack

AHRI Certified

UL Certified

Molex Plug Connections for field installed heater kits

Dual Voltage Direct Drive Blower with multi-speed motor

Thermoplastic Drain Pan with bottom primary and secondary connections

Optional Decorative Grill for front return applications

Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

FUJITSU FHRNTT3617SAZTNA

Item#:

FHRNTT3617SAZTNA

Manufacturer Item:

FHRNTT3617SAZTNA

Manufacturer:

FUJITSU

FHRNTT3617SAZTNA_Spec

FHX072H2AA0AUA

Compare

Air Handler Commercial Heat Pump 6 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX072H2AA0AUA

Item#:

FHX072H2AA0AUA

Manufacturer Item:

FHX072H2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX072H2AA0AUA_Spec

|◀ ◀ 61 - 72 of 235 ▶ ▶|

View:

Complementary Content

${loading}