|◀ 541 - 552 of 842 ▶|
View:
Clean shot is a simple system flush that, when used correctly, will help ensure contaminants and debris commonly left in a system will be easily and safely removed. We also recommend using clean shot on equipment that has experienced a compressor burn-out to assist with removing unwanted acids and contaminants from the system.
    Ozone safe
  • Non-toxic
  • Non-flammable
  • User friendly
  • Pre-conversion preparation and system burnouts
  • Cleans ACR system lines
  • Includes free handy shot flushing tool
Item#:
CSSF-05
Manufacturer Item:
CSSF-05
Manufacturer:
REFRIGERANT
High Side Thawzone HS17004 Dehydrant, 4 oz Bottle
    High side Thaw zone is the original liquid dehydrant for the control of moisture in refrigeration systems
  • Seeks out moisture and chemically bonds to it
  • Original liquid dehydrant, frees your frozen system in minutes
  • Biodegradable
  • Enhanced moisture control in even the most advanced systems
  • Aids with oil return in low temperature systems
  • Compatible with all refrigerants and lubricants
  • Helps prevent the formation of acid
  • Environmentally sound
  • Non-polluting
  • Non-poisonous
Item#:
F53-2
Manufacturer Item:
17004
Manufacturer:
SEALED UNIT PARTS CO, INC
Mill Wiping Rags OIL MASTER Oil Absorbent 40 Lbs Bag,
Item#:
OIL MASTER
Manufacturer Item:
OIL MASTER
Manufacturer:
MILL WIPING RAGS INC.
RectorSeal T Plus 2 23431 Pipe Thread Sealant With PTFE, 1 pt Can, RectorSeal T Plus 2 is a non-hardening thread sealant containing PTFE plus synthetic fibers. These fibers are dispersed in a resinous base combined with inert mineral fillers to provide maximum sealing performance. Its low coefficient of friction allows tighter joint makeup with lower torque. It also breaks out easily without Gallonling, seizing, or damaging threads. It is excellent for service where immediate pressurization is necessary. RectorSeal T Plus 2 is non-toxic in accordance with NSF Standard 61. In addition, it is approved and listed with the Canadian Standards Association (CSA)
Item#:
23431
Manufacturer Item:
23431
Manufacturer:
RECTORSEAL - HOUSTON
Nu-Calgon 4083-91 DuraCoil Coil Protectant Aerosol 11 oz.,
Nu-Calgon 4083-91
Item#:
4083-91
Manufacturer Item:
4083-91
Manufacturer:
NU-CALGON
Nu-Calgon 4060-56 A/C Inject
Item#:
4060-56
Manufacturer Item:
4060-56
Manufacturer:
NU-CALGON
Nu-Calgon 4057-56 A/C Re-New has been successfully used for many years to improve the performance of air conditioning systems. A/C Re-New provides significant savings in energy use, quiets noisy systems, extends the life of systems, and resolves sticking reversing valves and TEVs due to friction. It is a lubricant that blends with the systems oil, lasting for the life of the equipment, or until the oil is changed. In recent years, A/C Re-New has been successfully used to aid in existing oil migration when retrofitting an R-22 air conditioning system with a near drop-in refrigerant; examples include R-427A and R-407C and others. A/C Re-New not only helps with oil return at retrofit, but also comprehensively renews the air conditioner by reducing friction in the compressor (lowers amp draw), quiets the system and can aid in sticking flow control valves because of friction due to years of service.
Item#:
4057-56
Manufacturer Item:
4057-56
Manufacturer:
NU-CALGON
Nu-Calgon 4126-34 Bio-fresh CD is a ready-to-use bacteriostat, fungistat and deodorizer based upon chlorine dioxide technology. It is recommended for control of bacteria, mold, mildew, fungi and yeast in IAQ applications. Its EPA registration includes application in HVACR ventilating equipment, including coils, condensate pans, filters and duct-work.
    A concentrated, ready-to-use bacteriostat that is a fungistat and deodorant
  • EPA registered for application in HVACR systems no. 9804-3-65516
  • Can be sprayed in occupied areas
  • Kills odors and controls bacteria
  • Eliminates odors where they exist
Item#:
4126-34
Manufacturer Item:
4126-34
Manufacturer:
NU-CALGON
Nu-Calgon 4182-35 Cal-Blue Plus Gas Leak Detector, 7 oz Spray Bottle, Clear Blue One of the most important tasks of today's technician is refrigerant management and specifically leak detection. For this job, the technician requires a quality, effective leak detector and Cal-Blue products meet that need. There are 2 formulations in the Cal-Blue product line. Outstanding freeze-protection: 5 deg F. Cal-Blue products are the complete gas leak detector. Not only do they detect the smallest leak, they also provides other significant benefits. The high viscosity formula provides long-lasting bubbles and enables the product to remain in contact with the applied surface for an extended period of time, thereby allowing the smallest of leaks to be detected. It is also non-corrosive to metal and this is a significant feature as it helps to maintain the integrity of piping, tubing and fittings.
  • High viscosity formulation to enhance contact time
  • Long-lasting bubbles
  • Non-corrosive to metals
  • Will not affect ultraviolet (black) lights One of the most important tasks of today's technician is refrigerant management and specifically leak detection. For this job, the technician requires a quality, effective leak detector and Cal-Blue products meet that need. There are 2 formulations in the Cal-Blue product line. Outstanding freeze-protection: 5 deg F. Cal-Blue products are the complete gas leak detector. Not only do they detect the smallest leak, they also provides other significant benefits. The high viscosity formula provides long-lasting bubbles and enables the product to remain in contact with the applied surface for an extended period of time, thereby allowing the smallest of leaks to be detected. It is also non-corrosive to metal and this is a significant feature as it helps to maintain the integrity of piping, tubing and fittings.,
Item#:
4182-35
Manufacturer Item:
681001-41821
Manufacturer:
NU-CALGON
All purpose pipe joint and gasket sealing compound for use on metals including aluminum, black iron, brass, copper, stainless steel, Galvanized steel and on plastics including PVC. Grrip sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. Provides leak proof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Joints can be disassembled easily, without damage to pipe or equipment. Grrip can be removed from skin or clothing, tools or equipment with isopropyl alcohol or Hercules for Hands hand cleaners.
Item#:
15520
Manufacturer Item:
15520
Manufacturer:
OATEY S.C.S
Arrow Adhesives 20506 PVC Cleaner 16 oz
901 is a solvent cleaner for use on all types of plastics, including PVC, CPVC, ABS and styrene plastic pipe and fittings. It will clean and slightly dissolve the surface of the pipe and fittings, providing better bonding surfaces for solvent cement when it is applied. 901 meets low-VOC requirements, as outlined by SCAQMD 1168/316A.
Item#:
20506
Manufacturer Item:
20506
Manufacturer:
ARROW CHEMICAL CORP
Oatey 45314-HERCULES Hand Cleaning Lotion 15 oz. Lemon Sent
Item#:
45314-HERCULES
Manufacturer Item:
45314
Manufacturer:
OATEY S.C.S
|◀ 541 - 552 of 842 ▶|
View: