Malco Zip-In HW8x1/2Zx Self-Piercing Sheet Metal Screw, Imperial, #8, Hex Washer Head, Slotted Drive, Zinc Plated

,
,

Malco T473-14

Malco T611-70 Double Ender Drill Bit 1/8",
,

Malco T611-70

Malco W29 Black Oxide Folding Hex Key Set, 9 Pieces

• Folds up like a knife, stores easily, eliminates lost keys
• Sturdy case can be used as a handle for extra leverage to apply torque

Sid Harvey Item #:T650-1: Replaces Part #:'s : T650,
,

T650-1

T650-1

Built-in wire cutter lets you finish the job you started with just one tool! double edged blade cleanly pierces through outer skin and insulation. Cuts from either direction around entire circumference of duct. Fine honed blade is long lasting stainless steel. Wire cutter cuts hardened wire rib coil. Compound leverage, for easy wire cutting. comfortable, non-slip vinyl gripped handles.

• Built-in wire cutter
• Double edged blade
• Cuts from either direction
• Fine honed blade
• 10.4 to 1 - 11.9 to 1 wire cutter variable leverage ratio (high/low) throughout stroke

,
,

Malco T671-2

Malco T671-2

Malco A2 Carbon Steel Scratch Awl, 6-1/4" OAL

• Use to scribe lines on metal, plastic and a variety of other materials
• Blades are high carbon, alloy tool steel fully polished to resist rust
• Blade tapers to a fine point and may be resharpened many times
• Easy-to-spot orange handles are shock and shatter resistant
• Shallow fluted handles with large end bearing surface provide a sure, comfortable grip
• User has choice of large diameter or regular grip handles
• Resharpable tool steel blades

,

,

Malco T648-2

Malco T648-2

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

• Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job

Sid Harvey Item #:T646-1: Replaces Part #:'s : 13447,
,

Malco T646-1

Malco T646-1

Malco 12F Folding Tool, 22 ga Sheet Metal, 12" L

• Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignment

Sid Harvey Item #:T646-3: Replaces Part #:'s : 13019,
,

Malco T646-3

Malco T646-3

Malco DS1 Anodized Aluminum Duct Stretcher, 16" OAL

• Use the duct stretcher to hold duct in place with 1 hand while slipping drive cleat in place with other hand
• The low profile, straight body is designed to go anywhere, even in the tightest quarters
• Additional spacing holes allow wheels to be adjusted to span greater distances
• Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole,
  ,
  
  
  
  

  T646-5

  
  

  T646-5

Malco DS2 Anodized Aluminum Offset Duct Stretcher, 16" OAL

• Use the duct stretcher to hold duct in place with 1 hand while slipping drive cleat in place with other hand
• The low profile, straight body is designed to go anywhere, even in the tightest quarters
• Additional spacing holes allow wheels to be adjusted to span greater distances
• Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up holeSid Harvey Item #:T646-6: Replaces Part #:'s : 13167,
  ,
  
  
  
  

  Malco T646-6

  
  

  Malco T646-6

Malco HC1B Pivot Pin Set for HC1 and HC2 hole cutters

Sid Harvey Item #:T646-10: Replaces Part #:'s : 13276,
,

Malco T646-10

Malco T646-10

Malco CB Replacement Cutter Bit, for Use with Model HC1 and HC2 Hole Cutters

Sid Harvey Item #:T646-12: Replaces Part #:'s : 13132,
,

Malco T646-12

Malco T646-12

Malco T646-14 Divider 18",
,

T646-14

T646-14