Malco Max2000 M2005 Bulldog Notching and Trimming Aviation Snip, 0.062" Aluminum, 0.054" Copper and Galvanized Steel, 0.048" Mild Steel, 0.038" Stainless Steel, 10" OAL

• The Bulldog aviation snip has high-leverage, snub-nosed alloy steel blades, with a serrated lower blade
• The Bulldog allows controlled notching and trimming out to the blade tip in heavy gauge metal or layered metal and seams
• Precisely ground blade tips also cut into tight spaces and flush to 90 deg walls
• Notches and trims to blade tip in heavy or layered metal
• Superior cutting life
• Compound linkage multiplies user hand leverage
• Adjustable pivot bolt
• Handles fit large or small hands
• Narrower grip opening accommodates large or small hands without sacrificing cutting length
• Extra-long-life compression spring
• Permanent riveted handles will not loosen and latch will not hang up

M2005

M2005

Malco RRW316 Square Drive Shank Hex Key Wrench Insert

Sid Harvey Item #:RRW3/16: Replaces Part #:'s : 13441,
,

RRW3/16

RRW3/16

Malco RRW5 Offset Ratchet Wrench 4",

Malco RRW5/16

Malco RRW5/16

Malco RRW516 Hex Key Wrench Insert, 5/16" x 1-5/8" OAL

• Facilitates easy ratcheting action for servicing hard to access valves common in air conditioning and refrigeration condensing units Malco RRW516 Hex Key Wrench Insert, 5/16" x 1-5/8" OALSid Harvey Item #:RRW5/16: Replaces Part #:'s : 13443,
  ,
  
  
  
  

  RRW5/16

  
  

  RRW5/16

Pocket size reamer deburrs nominal 1/4 in (6.4 mm) or larger tubing and fittings. Freely rotating, hardened steel blade holds its edge in both copper and ABS/PVC plastic. Under 6 in (152 mm) overall length.,

R308

Malco STC650 Tube Cutter 1/4"-2",
,

STC650

STC650

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

• Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job

,
,

Malco S2R

Malco S2R

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

• Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job

,
,

Malco S6R

Malco S6R

Produces cuts in ABS, PVC, rubber and fabric reinforced hose up to 1 in (25.4 mm) I.D. Rigid, durable nylon handle design provides sufficient leverage when cutting so that only moderate hand pressure is required. Stainless steel cutting blade is resharpenable and replaceable.

Sid Harvey Item #:TC400: Replaces Part #:'s : 1x476,
,

Malco TC400

Malco TC400

A handy tube cutter for cramped spaces so often encountered on installations or repairs. Only 1-11/16 in x 1-15/16 in x 7/8 in (42.9 x 49.2 x 22.2 mm). Weighs only 2-1/2 oz. (71 g) A mere 1-1/4 in (31.8 mm) clearance is all that is needed to operate the Imp.

,
,

TC127

TC127

A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

Undercut-indented hex washer slotted head
• Burr free
• Full 1/4" (number 8) head will not strip out of hex driver opening
• (1) 1/4" hex driver accommodates all sizes
• Undercut - always seats flush
• Trademarked and patented head markings indicate 1 and only genuine zip-ins US patent number D524, 638
• Combination lead double thread design: single starting thread machined down to very tip of screw point, instantly penetrates and engages in heavy gauge sheet metal and layered light gauge
• Consistent hard point: quality controlled heat treat, sharp tapered point will not mushroom or break, no walking
  
  

  Malco T473-4

A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In`s sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In`s penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

Head Size: 1/4"
• Length: 1/2"
• Number: 8
• Quantity: 1,000
• Package Type: Tub
• Single starting thread machined down to very tip of screw point
• Instantly penetrates and engages in heavy gauge sheet metal and layered light gauge
• Undercut-indented hex washer slotted head
• Zinc Plated
• Burr Fee
• Full 1/4" (no 8) head will not strip out of hex driver opening
• One 1/4" hex driver accommodates all sizes
• Undercut - always seats flush
• Quality controlled heat treat
• Sharp tapered point will not mushroom or break
  
  

  Malco T473-2