Chemtex PMWFF100 Medium Oil Pad

Chemtex PMWFF100

Tjernlund The SideShot models SS1 and SS2 SideWall Vent Systems include the UC1 Universal Control for increased safety, performance and reliability. Designed for oil fired heating equipment or a deluxe gas vent system. Patented vent termination propels flue gases at high velocities away from the building exterior, a necessity when venting oil fired equipment. Both models can be installed with zero clearance to combustible materials and have stainless steel construction in critical areas. Factory wired safety and operating controls allow simple interlock with any burner. The new model SS2 features a self-cleaning stainless steel, backward inclined impeller and sealed ball bearing motor for virtually maintenance free installations. Ultra-fine draft adjustment and slide-out access to all internal components. Easy multiple appliance interlocks with our MAC Series multiple appliance controls.

• Use to side wall vent non-condensing oil fired boilers, water heaters and furnaces that otherwise would require a conventional roof top terminated chimney
• Built-in interlock control with redundant high limit safety switch interfaces easily with thermostat, aquastat or primary controls
• Adjustable pre and post purge timing and easy fault code retrieval
• Stainless steel construction in all critical components including outdoor terminus
• Patented design jets flue gases away from the outside wall to eliminate potential staining of siding

Sid Harvey Item #:106-10: Replaces Part #:'s : 6H167,
,

Tjernlund 106-1

Make sure you ask for and use genuine Copleand parts. Copeland parts fit right, first time. Insisting on genuine Copeland parts will keep your refrigeration & A/C Compressor running reliably for the long haul

Copeland Parts 585-1076-02

Carlin Parts 77933 Blower Wheel 5-1/16" D x 2"W x 1/2" Bore,
,

Carlin Parts 28605

Bindus Manufacturing HHU-AM-2 Hot Water Coil 18-1/8" x 21-5/8"

Arcoliner B42-17

Danfoss 018F4120 Solenoid Valve Coil 15 Watt 208/240 VAC

• All HCFC and HFC refrigerants
  
  
  

  Danfoss 018F4120

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CA60A24-230L-000

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CC48A24-240L-184

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CC30A24-145L-059

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CC24A24-140L-184

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CA30A24-160L-000