STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CC36A24-210L-184

FEATURES

Rifled copper tubing, enhanced aluminum fins.

Fully insulated cabinets with faced insulation.

Split access doors in front of cabinet for easy service access.
Refrigerant and plumbing connections:

Immersion tested at 500 psi, followed by nitrogen pressurization and factory sealing to ensure optimal system integrity and long-term reliability.

Schrader provided for pressure assurance testing with 3/8 ODS Stem mounted on end of Liquid Line.

Condensate Drains: 3/4 NPT

Liquid line: 3/8 ODS

Suction line: 3/4 ODS on 1-1/2-ton to 3-ton 7/8 on 3-1/2-ton to 5-ton

Aspen CC60B34-210L-184

Standard Equipment:

Integrated boiler control module with intermittent electronic ignition system & indicator/diagnostic lights

Integrated low-water cutoff, with test button

Combination pressuretemperature gauge

Two-piece, top jacket panel

Insulated extended steel jacket

Cast iron sections with built-in air separator

Radiation plates

Steel base

Inducer assembly (with coversizes 256 only)

Flue gas collector/transition assembly

Combination gas valve for 24 volt

Wiring harness

Air pressure switch

Non-linting pilot burner

High-grade stainless steel burners

40 VA transformer

Electrical junction box

Rollout thermal fuse element

High-limit temperature control

Circulator (when ordered)  Sizes 255: Taco 007e  Sizes 68: Taco 007

30 PSI ASME relief valve (boiler sections tested for 50 PSI working pressure)

Drain valve

Weil-Mclain CGI3PIN-HALT

STANDARD FEATURES:

Rifled aluminum tubing, enhanced aluminum fins.

Downflow plates and manufactured housing drain hose and drain elbow included.

Multi-stage leak testing at 500 psi pressure decay, mass spectrometer tested with Helium, then Nitrogen pressurized and factory sealed for optimal system integrity and long-term reliability.

Left-hand refrigerant/plumbing connections, with downturn suction line for easy installation in manufactured housing applications. Schrader provided for pressure assurance testing

Aspen DM36A3J-177L-601

STANDARD FEATURES:

Rifled aluminum tubing, enhanced aluminum fins.

Downflow plates and manufactured housing drain hose and drain elbow included.

Multi-stage leak testing at 500 psi pressure decay, mass spectrometer tested with Helium, then Nitrogen pressurized and factory sealed for optimal system integrity and long-term reliability.

Left-hand refrigerant/plumbing connections, with downturn suction line for easy installation in manufactured housing applications. Schrader provided for pressure assurance testing

Aspen CE60A3N-245L-135

Advanced Distributor Products (ADP) started with a vision to produce the best evaporator coils in the country. In 1992, ADP began production in Grenada, Mississippi, and started developing innovative products that are fully supported by a research and development laboratory, which includes areas for testing, assembling, and designing future products.
Today, ADP offers a wide range of premier HVAC products with exclusive design advantages. We pride ourselves on our quality, flexibility, and solutions. We design our products to fit any application and simplify installation. And were always open to new partnerships with businesses and the communities we serve.

Leading US manufacturer of evaporator coils and air handlers

Built to the highest quality standards

Microban antimicrobial technology

Advanced performance testing simulation software

Broadest product line in the industry  thousands of variations available Products designed to matchx

perfectly with any system

Personalized programs for distributor partners

Custom product strategies to meet local needs

Short lead times

Low warranty rates with simple claim process

Insights from industry experts

Focused on distributor and dealer success

Quick and easy installation in the field

Thermo Products TC7B4821S

Advanced Distributor Products (ADP) started with a vision to produce the best evaporator coils in the country. In 1992, ADP began production in Grenada, Mississippi, and started developing innovative products that are fully supported by a research and development laboratory, which includes areas for testing, assembling, and designing future products.
Today, ADP offers a wide range of premier HVAC products with exclusive design advantages. We pride ourselves on our quality, flexibility, and solutions. We design our products to fit any application and simplify installation. And were always open to new partnerships with businesses and the communities we serve.

Leading US manufacturer of evaporator coils and air handlers

Built to the highest quality standards

Microban antimicrobial technology

Advanced performance testing simulation software

Broadest product line in the industry  thousands of variations available Products designed to matchx

perfectly with any system

Personalized programs for distributor partners

Custom product strategies to meet local needs

Short lead times

Low warranty rates with simple claim process

Insights from industry experts

Focused on distributor and dealer success

Quick and easy installation in the field

Advance Distributers HX8J30A15500

Diversitech Triple-D TRIPLE-D Universal Coil Cleaner, 1 Gallon, Clear Orange, Triple-D is the ultimate universal coil cleaner that can be used on condensers, evaporators, microchannels, roof-top units and mini-split applications. The triple active synergistic highly effective solution is formulated to remove a board range of soils while degreasing and deodorizing. It is ideal for cleaning most metals including aluminum and copper while extending equipment life and diminishing the potential for refrigerant leaks. Using 75% less than comparable products, it reduces the amount of solution needed to clean. Triple-D is biodegradable and NSF approved.,
,

Diversitech RT340V

Therma Flow Parts TR-GASKET Trainco Coil Gasket,

Therma Flow Parts STW-PLATE+GASKET

Riello Adapter Kit BF3/BF5 Burners

Riello Parts C7001038

Riello Ionization Lead 40 Series G120 G200 G400 G750 G900 Gas Burners<

Riello Parts 3007310