Diversified Heat Transfer NCG-PR Neoprene Coil Gasket, 1/4 Inch Dia.

Diversified Heat Transfer NCG-PF

AS-MB-125 Microbubble Air Separator, 1-1/4", IPS, 150 psig, 240 deg F, 23.1 gpm, Forged Brass, 3-12/16" L x 6-15/16" H,
,

Watts Water AS-MB125

Resideo Braukmann DS06 Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).

• Built-In Dial-Set- no gauge is needed to install or set static pressure
• Built-in strainer to simplify maintenance
• Fabric reinforced diaphragm regulator, stainless steel and engineered thermoplastics internal parts
• Balanced single seat construction
• Minimum pressure differential between inlet and outlet ports is 14.5 psig
• Plus or minus 4 psig dial calibration
• Less than 0.25% of weighted average of low lead content
• 1/4" NPT gauge tap
• 10:1 maximum reduction ratio
• Double union sweat union fittings

,
,

Resideo Braukmann DS06-101-DUT-LF

Arzel PAN-SOLO4 Solenoid Valve, for use with MPS and AirBoss Panels, 24 VDC

• ,
  ,
  

  Arzel PAN-SOLO4

Duro Dyne RS156 Steel Damper Regulator

Webstone Valve Pro-Connect Press 74003 Air Separator, 3/4", FNPT, 150 psig, 6 gpm, Forged Brass, 3-5/8" W x 6-1/4" H

• Reduces noise
• Improves system efficiency and operation
• Reduces wear on system components
• Requires no regular maintenance
• Fewer call backs
• Stainless steel coalescing medium is a more durable alternative
• Pin guided float ensures smooth operation
• Vent head and coalescing medium can be removed for cleaning
• Flow may be directed into either side of the unit

,

Webstone Valve 74003

Honeywell SPRD08 Zonefirst SPRD Static Pressure Bypass Regulating Damper 8"

Honeywell SPRD08

Honeywell V8043B1027 Zone Valve 2-Way Normally Open24 VAC Straight 3/4" OD

The Resideo SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding.

• No clog vent
• Dirt and debris resistant
• 360 deg adjustable collar ring for installation flexibility
• Stainless steel concentrator which eliminates gurgling noise
• Bronze body for rigid construction

Sid Harvey Item #:PV150: Replaces Part #:'s : R55-621,
,

Honeywell PV150

All field vent hoods are made of heavy gauge aluminum and can be used with natural gas, LP gas or oil-fired equipment. There are five diameters ranging from 3 to 8 Inch. The concentric pipe, angled outlet deflectors, and spaced plate design allow for better heat dissipation. This type of construction minimizes the effects of heat on the outside wall. The angled hood design reduces the effects of wind on the venting system. The inner and outer pipe are a continuous structure. This allows for easy installation to power venter or vent pipe and also eliminates possible positive pressure leaks in the wall section.

• Can be used in conjunction with PVG and PVO power venters or with forced draft systems
• 7-5/8 x 7-5/8 shield for 0 clearance to combustible
• Designed for standard vent pipe and Class B type double-wall (B-Vent) connection
• Provides proper clearance between flue gas stream and wall combustible

Resideo Braukmann AM-1 series accurately adjusts, maintains and limits the hot water temperature to a desired setting selected by the user. By installing a Resideo Braukmann AM-1 mixing valve, raising water heater storage temperature setting and limiting mixed outlet water temperature to a safe temperature, more usable hot water is available.

• Features dual purpose mixing or diverting values
• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Provides reliable performance at minimum flow of 5 gpm and proportional valve for simultaneous control of hot and cold
• Tamper-resistant design with nickel-plated brass construction and EPDM o-rings
• Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
• Teflon-coated shuttle, EPDM rubber o-ring

,
,

Resideo Braukmann AM100-US-1LF

Watts AS-MB-100 Microbubble Air Separator, 1", IPS, 150 psig, 240 deg F, 15 gpm, Forged Brass, 3-12/16" L x 6-15/16" H

• Features a durable brass body construction, corrosion-resistant polyphenylsulfone coalescing media that withstands petroleum based cleaners, glycol anti-freeze
• Requires no minimum inlet/outlet piping length for proper operation
• DuoVent air vent assembly has a high-capacity and high-temperature rating
• Fully serviceable - can be disassembled for inspection and cleaning
• Bottom tapping for use with series RBFF residential boiler fill fitting

,
,

Watts Water AS-MB100