• High limit opens burner circuit only.
• Includes transformer and accessory terminals for adding a remote low limit controller.
• Case available for horizontal or vertical mounting.
• Requires a 24 VAC thermostat with heat anticipator set at 0.2 amps.

Sid Harvey Remanufactured C312-8R

• 3" insulation, stop factory set at 240 deg F, well adapter and heat conductive compound includes,
  ,
  

  Sid Harvey Remanufactured C290-1R

• Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: full load - 7.4 amp at 120 VAC line voltage, 3.7 amp at 240 VAC; locked rotor - 44.4 amp at 120 VAC line voltage, 22.7 amp at 240 VAC
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor

Sid Harvey Remanufactured C317-8R

Sid Harvey Remanufactured C312-10R

Sid Harvey Remanufactured C290R

• Pressure actuated high limit, safety control for steam heating boilers, It breaks an electrical circuit to shut down the burner if steam pressure rises above a safe level
• Contains an SPST Micro switch snap-acting switch
• Sensitive pressure actuated diaphragm expands or contracts with pressure variations, moving a lever mechanism which operates the snap switch
• A screw on top of the case allows setpoint adjustment without removing the cover
• Differential is adjusted by means of a dial located inside the case
• Recommended minimum setpoint is differential setting plus 1-1/2 psi
• Stainless steel diaphragm sensor element
• Makes at setpoint on pressure fall breaks at setpoint plus differential on pressure rise Honeywell Pressuretrol PA404A Pressure Controller with additive differential, 0.5 - 9 psi, 3-3/8 Inch W x 4-15/32 Inch H x 2-1/4 Inch D,
  

  Sid Harvey Remanufactured C354R

• ,
  ,
  

  Sid Harvey Remanufactured C434-9R

• Immersion-type controllers that combine high limit protection with switching relay control of burner and circulator motors
• High limit opens burner circuit only
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• 1-1/2 - 3 Inch depth less well insulation
• Electrical burner rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VC; at locked rotor: 44.4 amp at 120 VAC, 22.2 amp at 240 VAC; millivolt: 0.25 amp at 1/4 - 12 VDC
• Electrical circulator rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC; at locked rotor: 44.4 amp at 120 VAC, 22.2 amp at 240 VAC Honeywell L8148J1009/U Aquastat Relay, 120 VAC at 60 Hz, SPST, 120 - 240 deg F High Limit, 8 deg F Fixed Differential,
  ,
  

  Sid Harvey Remanufactured C312-9R

Sid Harvey Remanufactured C322-4R

• Immersion type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Include diaphragm powerhead and micro switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Select models include large transformers and extra terminals for supplying power to low voltage zone valves
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)

Sid Harvey Remanufactured C317-2R