Air Handler Multi-Position 2.5 Ton ECM R454B TXV 21" Singlar

Refrigerant leak detection dissipation system for added safety

Multi-tap ECM (electronic commutating motor) motors all sizes

Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board

Five available speed tags to meet a wide range of applications

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Construction innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Pre-painted galvanized steel cabinet

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations

Horizontal hanging provisions on cabinet

Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter

Easy plug-in provisions for heater installation

Factory installed thermostatic expansion valve, TXV, on all coils

Designed for manufactured housing applications

FHMA5X30L0BA

Item#:

FHMA5X30L0BA

Manufacturer Item:

FHMA5X30L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHMA5X30L0BA_Broc

Air Handler 4 Ton 7 KW 1-Stage ECM Motor

Quiet Operation1: Provided by a cabinet construction with 1.0 inch foil faced insulation for quieter sound characteristics

Rugged Steel Cabinet Construction: Designed for added strength and versatility

Compact Design and 4-Way Field Convertible Design: Stands at only 35" tall and convertible options include vertical upflow, vertical downflow, horisontal left hand or right hand air supply

Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

FHSMTT4824SJZTNAB07

Item#:

FHSMTT4824SJZTNAB07

Manufacturer Item:

FHSMTT4824SJZTNAB0

Manufacturer:

FUJITSU

FHSMTT4824SJZTNAB07_Spec

Air Handler Commercial Heat Pump 7-1/2 Ton 460 /3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX091H2AA0AUA

Item#:

FHX091L2AA0AUA

Manufacturer Item:

FHX091L2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX091L2AA0AUA_Spec

Air Handler 4 Ton Multi Position 230/1 ECM Motor TXV

Front or Bottom Return with aluminum tube and fin coil

Flow Check Piston for cooling or heat pump operation

Wall-hanging brackets

Built in Filter Rack

AHRI Certified

UL Certified

Molex Plug Connections for field installed heater kits

Dual Voltage Direct Drive Blower with multi-speed motor

Thermoplastic Drain Pan with bottom primary and secondary connections

Optional Decorative Grill for front return applications

Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

FHRATT4821SJZTNA

Item#:

FHRATT4821SJZTNA

Manufacturer Item:

FHRATT4821SJZTNA

Manufacturer:

FUJITSU

FHRATT4821SJZTNA_Broc

Air Handler 4 Ton Multi Position 120/1 ECM Motor TXV

Front or Bottom Return with aluminum tube and fin coil

Flow Check Piston for cooling or heat pump operation

Wall-hanging brackets

Built in Filter Rack

AHRI Certified

UL Certified

Molex Plug Connections for field installed heater kits

Dual Voltage Direct Drive Blower with multi-speed motor

Thermoplastic Drain Pan with bottom primary and secondary connections

Optional Decorative Grill for front return applications

Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

FHRATT4821SAZTNA

Item#:

FHRATT4821SAZTNA

Manufacturer Item:

FHRATT4821SAZTNA

Manufacturer:

FUJITSU

FHRATT4821SAZTNA_Broc

Air Handler Mult-Position 2-Stage 2 Ton 208/230 TXV R410A 42-11/16" H x 17-5/8" L x 22" D

FEATURES

Environmentally Balanced Refrigerant Technology

R-410A, chlorine-free, non-ozone depleting refrigerant

Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant

Energy Efficient Operation

Variable Speed Constant Airflow ECM (Electronically Commutating Motor) operates efficiently at all speeds

Maximizes efficiency of heating and cooling systems

Ultra low power consumption during fan only operation
Indoor Weather Control

Warm, comfortable heating air temperatures

Unmatched humidity control, especially with thermostat with relative humidity controls

Airflow and Sound Technology

Diffuser air discharge section for high airflow efficiency and quiet, smooth operation

High duct static capability

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and cabinet air leakage less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Condensate Control and Disposal Technology

Minimal standing waterless microbial growth for improved IAQ and reduced condensate line clogging and related condensate leakage

Condensate fittings relocated away from turbulent airflow patterns at the blower entrance for improved condensate control performance

Overflow feature for slope coil units allows condensate to exit the unit without damage to product under clogged primary and secondary line conditions

Tested for condensate disposal at conditions much more severe than those required by AHRI

Primary and secondary drain connections to comply with HUD

All pans constructed of an injection molded glass-filled polycarbonate
engineered resin material, with brass drain connections.

High density, super thick cabinetry insulation with vapor barrier

International Comfort Products FTMA4B60L0DA

Item#:

FTMA4X24L0BA

Manufacturer Item:

FTMA4X24L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FTMA4X24L0BA_Spec

Fujitsu Heat Pump Condensing Unit Composite Base 4 Ton

Features

New composite base pan dampens sound, secures wire grille, eliminates corrosion and reduces number of fasteners needed

Improved tubing design reduces vibration and stress, making unit quieter and reducing opportunity for leaks

Optimized defrost characteristics - decrease defrosting and provide better home comfort

Powder coat paint finish for a long lasting professional finish

Optimized reversing valve sizing improves shifting performance for quieter unit operation and increased life of the system

Enhanced mufflers help to dissipate vibration energy for quieter unit operation

Scroll compressor a sound abating feature added to the compressor significantly reduces noise when system transitions in and out of defrost mode

Modern cabinet aesthetics increased curb appeal with visually appealing design

Louver panels provide ultimate coil protection, enhance cabinet strength and increase cabinet rigidity

Optimized fan orifice optimizes airflow and reduces unit sound

Rust resistant screws confirmed through 1500-hour salt spray testing

Service valve has between 3"-4"-5" valve space provides a minimum working area of 27-square inches for easier access

Integrated heat pump lift receptacle allows standard CPVC stands to be inserted into the base

15" wide, industry leading corner service access makes repairs easier and faster.

External gauge port access allows easy connection of low-loss gauge ports

Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal

Service trays hold fasteners or caps during service calls

QR code provides technical information on demand for faster service calls

Fan motor harness with extra-long wires allows unit top to be removed without disconnecting fan wire

Fujitsu FO3015RSJNAB

Item#:

FO4815RSJNAA

Manufacturer Item:

FO4815RSJNAA

Manufacturer:

FUJITSU

Air Handler Ceiling Mount 1.5 Ton 208/230 R454B TXV ECM Motor Uncased

MULTIFAMILY CEILING MOUNT FAN COIL

FMU5Z and FMC5Z 1-1/2, 2, 2-1/2, and 3 Tons

Horizontal application only

Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW

40VA, 208/230V-1-60 transformer

All models use Puron Advance, R-454B refrigerant and have a hard-shutoff TXV metering device

Adjustable condensate drain pan FM(C,U)5X, FM(C,U)5Z

Horizontal return applications require field fabricated bottom cover

Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193

Cabinets insulated to prevent cabinet sweating

Refrigerant lines and electrical connections can be run out the back or side of casing Performance

PSC motor on all FMU5X & FMC5X models

ECM motor on all FMU5Z & FMC5Z models Easy To Install Service

A-coil design for maximum surface area

Multiple electrical, refrigerant lineset and drain line entry for application flexibility

Primary and secondary drain connections exit from the back or side of the cabinet

Supports furred-down ceiling open return and ducted return applications

Sweat connections for long term reliability

Grooved aluminum tube / aluminum fin coils on FMU5X, FMC5X, FMC5Z, and FMU5Z models with AL in the 10th & 11th position

Item#:

FMU5Z1800AL

Manufacturer Item:

FMU5Z1800AL

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FMU5_SPEC

Air Handler Mult-Position 2-Stage 2 Ton 208/230 TXV R454B 42-11/16" H x 17-5/8" W x

Factory-installed refrigerant leak dissipation systems to meet new UL requirements, demonstrating our commitment to safety.

Variable-speed blower for quiet operation, delivering more even temperature levels and enhanced humidity control.

Efficiency-optimizing Thermostatic Expansion Valve (TXV).

Compatible with two-stage outdoor units.

Corrosion-resistant all-aluminum coil.

Convenient washable filter.

Standard size filter compatibility.

Compatible with air purifiers and dehumidifiers.

Fully insulated cabinet.

Corrosion-free sloped drain pan design to help reduce mold and bacteria buildup.

10-year parts limited warranty.

Item#:

FTMA5X24L0BA

Manufacturer Item:

FTMA5X24L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FTMA5X24L0BA_SPEC

Air Handler Mult-Position 2-Stage 4 Ton R454B 22" L x 21" W x 53-1/2" H x 22" D

FEATURES

Environmentally Balanced Refrigerant Technology

R-454B, chlorine-free, non-ozone depleting refrigerant

Refrigerant leak detection dissipation system for added safety

Thermostatic Expansion Valve (TXV) designed to maximize performance with

R-454B refrigerant Energy Efficient Operation

Variable Speed Constant Airflow ECM (Electronically Commutating Motor) operates efficiently at all speeds

Maximizes efficiency of heating and cooling systems

Ultra low power consumption during fan only operation Indoor Weather Control

Warm, comfortable heating air temperatures

Unmatched humidity control, especially with thermostat with relative humidity controls Airflow and Sound Technology

Diffuser air discharge section for high airflow efficiency and quiet, smooth operation

High duct static capability

Design meets stringent regulations for cabinet air leakage of less than 2% cabinet leakage rate at 1 inches W.C. and 1.4% cabinet leakage rate at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Item#:

FTMA5B48L0CA

Manufacturer Item:

FTMA5B48L0CA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FTMA5B48L0CA_SPEC

Fujitsu Heat Pump Condensing Unit Composite Base 3.5 Ton