|◀ ◀ 1021 - 1032 of 1703 ▶ ▶|
View:

Air Handler 5 Ton Multi Position 120/1 ECM Motor

  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    FHRATT6021SAZTNA

    • Item#:
    FHRATT6021SAZTNA
    Manufacturer Item:
    FHRATT6021SAZTNA
    Manufacturer:
    FUJITSU
     
    FHRATT6021SAZTNA_Broc

    Air Handler Multi-Position 2 Ton ECM R454B TXV 21" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X24L0BA

    • Item#:
    FHMA5X24L0BA
    Manufacturer Item:
    FHMA5X24L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X24L0BA_Broc

    Air Handler Multi-Position 4 Ton ECM R454B TXV 21" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X48L0CA

    • Item#:
    FHMA5X48L0CA
    Manufacturer Item:
    FHMA5X48L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X48L0CA_Broc

    Air Handler 4 Ton 3-Stage ECM Motor

  • Constant CFM Motor: When paired with the EcoNet® Smart Thermostat, the motor gradually auto-adjusts from low capacity to 100% of capacity to meet comfort requirements  allowing for ultimate humidity control, quieter sounds levels and year-round energy savings When paired with a 24V two-stage thermostat, the air handler runs in 3-speeds to match airflow with outdoor unit
  • Diagnostics  Easy & Quick Diagnostics & Ongoing Monitoring with Bluetooth®2 Technology & EcoNet®: With the BluArch & EcoNet® Apps, built-in technology makes monitoring, troubleshooting and repairing the product easier than ever before The Fujitsu Line with the BluArch App via Bluetooth® technology, features up to 62% faster overall diagnostics over other residential HVAC brands1
  • No Dip Switches = Fast Seamless Final Installation: The Fujitsu Line, with BluArch App-based commissioning via Bluetooth® technology, features up to 54% faster installation over other residential HVAC brands*
  • New Fujitsu Air Handler Control Board (AHC): Enables constant CFM airflow  Introduces Bluetooth® connectivity for access to advanced diagnostic information from the Contractor App on your mobile device  Maintains EcoNet® diagnostics for remote access when shared by the homeowner
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Quieter Sound Levels: Provided by sturdy cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193

    FHRNVV4821SJZTCA

    • Item#:
    FHRNVV4821SJZTCA
    Manufacturer Item:
    FHRNVV4821SJZTCA
    Manufacturer:
    FUJITSU
     
    FHRNVV4821SJZTCA_Spec

    Air Handler Multi-Position 3.5 Ton ECM R454B TXV 22" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X42L0CA

    • Item#:
    FHMA5X42L0CA
    Manufacturer Item:
    FHMA5X42L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X42L0CA_Broc

    Air Handler Multi-Position 4 Ton ECM R454B TXV 21" Modulating

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5B48L0CA

    • Item#:
    FHMA5B48L0CA
    Manufacturer Item:
    FHMA5B48L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5B48L0CA_Broc

    Air Handler Multi-Position 1.5 Ton ECM R454B TXV 14" Single Stage

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X18L0AA

    • Item#:
    FHMA5X18L0AA
    Manufacturer Item:
    FHMA5X18L0AA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X18L0AA_Broc

    Air Handler 2 Ton 2-Stage Constant Torque R410A 17-1/2" W x 42-1/2" H x 22" D

  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections
  • Air handlers are 230/1 Volts



    Fujitsu FHRNTT3617SJZTNA

    • Item#:
    FHSMTT2417SAZTNAN00
    Manufacturer Item:
    FHSMTT2417SAZTNAN00
    Manufacturer:
    FUJITSU
     
    FHSMTT2417SAZTNAN00_Spec

    Air Handler Multi-Position 5 Ton ECM R454B TXV 24" Modulating

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5B60L0DA

    • Item#:
    FHMA5B60L0DA
    Manufacturer Item:
    FHMA5B60L0DA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5B60L0DA_Broc

    Air Handler 5 Ton Multi Position 230/1 ECM Motor

  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    FHRATT6021SJZTNA

    • Item#:
    FHRATT6021SJZTNA
    Manufacturer Item:
    FHRATT6021SJZTNA
    Manufacturer:
    FUJITSU
     
    FHRATT6021SJZTNA_Broc

    Control Cloud

    Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.
    Fujitsu A/C Parts FJ-AC-WIFI-1 Control Cloud

    Fujitsu A/C Parts FJ-AC-485-1

    Item#:
    FJ-AC-WIFI-1
    Manufacturer Item:
    FJ-AC-WIFI-1
    Manufacturer:
    FUJITSU

    Air Handler Heat Pump 15 Ton 460/3 R410A Horizontal Multi-Position and Verticall 56-1/16 H x 89 W x 283/16 L

  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.



    International Comfort Products FHS180HAAA2AUA

    • Item#:
    FHS180LAAA2AUA
    Manufacturer Item:
    FHS180LAAA2AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHS180LAAA2AUA_Spec
    |◀ ◀ 1021 - 1032 of 1703 ▶ ▶|
    View: