S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Constructed of aluminum fins bonded to internally grooved aluminum tubingCoils are tested at the factory with an extensive refrigerant leak check Coils have copper sweat refrigerant connections Feature two sets of 3/4" NPT Condensate drain connections for ease of connection Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only) Approved for system application with variety of Fujitsu outdoor units Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material Compatible with germicidal light system (UV resistant) Bi-directional airflow eliminates the need to switch any internal components from horizontal left to right Unique drain pan design maximizes application flexibility and condensate removal N-Coil design maximizes performance and minimizes height required at installation Coils are AHRI certified for system application with a variety of Fujitsu outdoor units TEV metering device
Fujitsu Unitary FCC2414TSA
Features:
Fujitsu Indoor Furnace cased coils and replacement
uncased coils are designed for use with Fujitsu outdoor
units and are available for vertical upflow or downflow,
and horizontal left or horizontal right airflow. When
matched with Fujitsu outdoor units, the coils provide a
nominal capacity range from 18,000 BTU/HR [5.24 kW]
to 60,000 BTU/HR [17.6 kW].
Constructed of aluminum fins bonded to internally
grooved aluminum tubing.
Coils are tested at the factory with an extensive refrigerant leak check.
Coils have copper sweat refrigerant connections.
Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate
drain connections for ease of connection.
Chatleff metering device connections, at inlet and outlet
of TXV or EEV and equalizer connections (TXV only).
Approved for system application with variety of Fujitsu
outdoor units.
Condensate drain pan is constructed of high grade, heat
resistant, corrosion free thermal-set material.
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any
internal components from horizontal left to right.
Unique drain pan design maximizes application flexibility
and condensate removal.
N-Coil design maximizes performance and minimizes
height required at installation.
Coils are AHRI certified for system application with a
variety of Fujitsu outdoor units.
Fujitsu Unitary FCCN3617SZTA
Fujitsu Unitary FCCN4821SZTA
Item#:
FCCN4824SYTA
Manufacturer Item:
FCCN4824SYTA
Manufacturer:
FUJITSU
Features:
Fujitsu Indoor Furnace cased coils and replacement
uncased coils are designed for use with Fujitsu outdoor
units and are available for vertical upflow or downflow,
and horizontal left or horizontal right airflow. When
matched with Fujitsu outdoor units, the coils provide a
nominal capacity range from 18,000 BTU/HR [5.24 kW]
to 60,000 BTU/HR [17.6 kW].
Constructed of aluminum fins bonded to internally
grooved aluminum tubing.
Coils are tested at the factory with an extensive refrigerant leak check.
Coils have copper sweat refrigerant connections.
Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate
drain connections for ease of connection.
Chatleff metering device connections, at inlet and outlet
of TXV or EEV and equalizer connections (TXV only).
Approved for system application with variety of Fujitsu
outdoor units.
Condensate drain pan is constructed of high grade, heat
resistant, corrosion free thermal-set material.
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any
internal components from horizontal left to right.
Unique drain pan design maximizes application flexibility
and condensate removal.
N-Coil design maximizes performance and minimizes
height required at installation.
Coils are AHRI certified for system application with a
variety of Fujitsu outdoor units.
Fujitsu Unitary FCCN4921SZTA
Features:
Fujitsu Indoor Furnace cased coils and replacement
uncased coils are designed for use with Fujitsu outdoor
units and are available for vertical upflow or downflow,
and horizontal left or horizontal right airflow. When
matched with Fujitsu outdoor units, the coils provide a
nominal capacity range from 18,000 BTU/HR [5.24 kW]
to 60,000 BTU/HR [17.6 kW].
Constructed of aluminum fins bonded to internally
grooved aluminum tubing.
Coils are tested at the factory with an extensive refrigerant leak check.
Coils have copper sweat refrigerant connections.
Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate
drain connections for ease of connection.
Chatleff metering device connections, at inlet and outlet
of TXV or EEV and equalizer connections (TXV only).
Approved for system application with variety of Fujitsu
outdoor units.
Condensate drain pan is constructed of high grade, heat
resistant, corrosion free thermal-set material.
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any
internal components from horizontal left to right.
Unique drain pan design maximizes application flexibility
and condensate removal.
N-Coil design maximizes performance and minimizes
height required at installation.
Coils are AHRI certified for system application with a
variety of Fujitsu outdoor units.
Fujitsu Unitary FCC4821TMA
Features
Fujitsu Indoor Furnace cased coils and replacement
uncased coils are designed for use with Fujitsu outdoor
units and are available for vertical upflow or downflow,
and horizontal left or horizontal right airflow. When
matched with Fujitsu outdoor units, the coils provide a
nominal capacity range from 18,000 BTU/HR [5.24 kW]
to 60,000 BTU/HR [17.6 kW].
Constructed of aluminum fins bonded to internally
grooved aluminum tubing.
Coils are tested at the factory with an extensive refrigerant
leak check.
Coils have copper sweat refrigerant connections.
Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate
drain connections for ease of connection.
Chatleff metering device connections, at inlet and outlet
of TXV or EEV and equalizer connections (TXV only).
Approved for system application with variety of Fujitsu
outdoor units.
Condensate drain pan is constructed of high grade, heat
resistant, corrosion free thermal-set material.
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any
internal components from horizontal left to right.
Unique drain pan design maximizes application flexibility
and condensate removal.
N-Coil design maximizes performance and minimizes
height required at installation.
Coils are AHRI certified for system application with a
variety of Fujitsu outdoor units.
Item#:
FCCN3621SYTA
Manufacturer Item:
FCCN3621SYTA
Manufacturer:
FUJITSU
FEATURES:
Smart Diagnostics
Self configuring (ease of installation)
Easier troubleshooting, providing faster service and repair
Energy Tracking capability with the Ion Wall Control.
(Energy Tracking has the ability to monitor and estimate the energy
consumption of your Ion system.)
Compatibility with wall control depends on software version. Check
the installation instructions for minimum requirements.
Environmentally Responsible Refrigerant
Technology
R-410A refrigerant chlorine-free, non-ozone depleting
Thermostatic Expansion Valve (TXV) designed to maximize
performance with R-410A refrigerant. Bi-flow hard-shutoff with
mechanical fittings
Smart Diagnostics
Technology
International Comfort Products FCMB4B48L0CA
Item#:
FCMB4B60L0DA
Manufacturer Item:
FCMB4B60L0DA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
FEATURES:
Smart Diagnostics
Self configuring (ease of installation)
Easier troubleshooting, providing faster service and repair
Energy Tracking capability with the Ion Wall Control.
(Energy Tracking has the ability to monitor and estimate the energy
consumption of your Ion system.)
Compatibility with wall control depends on software version. Check
the installation instructions for minimum requirements.
Environmentally Responsible Refrigerant
Technology
R-410A refrigerant chlorine-free, non-ozone depleting
Thermostatic Expansion Valve (TXV) designed to maximize
performance with R-410A refrigerant. Bi-flow hard-shutoff with
mechanical fittings
Smart Diagnostics
Technology
International Comfort Products FCMB4B60L0DA
Item#:
FCMB4X24L0BA
Manufacturer Item:
FCMB4X24L0BA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Multi-position design for horizontal or vertical installation without
modification.
Standard sloped drain pans and cleanable insulation treated with an
immobilized anti-microbial agent to inhibit the growth of bacteria and
fungi on the insulation.
High-static design meets a wider range of applications than competitive
packaged air handler lines.
Ultra Low Leak Economizer accessory provides ventilation air and free
cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
Cooling coils with mechanically bonded fins provide peak heat transfer.
Hot water coil, steam coil, and electric heat accessories are available.
Standard factory-installed thermo-static expansion valves (TXV) with
removable power element on FAX/FAS units.
Die-formed galvanized steel casings provide durability and structural
integrity. Optional paint is available.
Upgraded unit control board with intuitive indoor fan adjustment.
Standard 2-Speed Indoor Fan Motor system.
International Comfort Products FAX091H2AA0AUA
Item#:
FAX091L2AA0AUA
Manufacturer Item:
FAX091L2AA0AUA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
FEATURES:
Smart Diagnostics
Self configuring (ease of installation)
Easier troubleshooting, providing faster service and repair
Energy Tracking capability with the Ion Wall Control.
(Energy Tracking has the ability to monitor and estimate the energy
consumption of your Ion system.)
Compatibility with wall control depends on software version. Check
the installation instructions for minimum requirements.
Environmentally Responsible Refrigerant
Technology
R-410A refrigerant chlorine-free, non-ozone depleting
Thermostatic Expansion Valve (TXV) designed to maximize
performance with R-410A refrigerant. Bi-flow hard-shutoff with
mechanical fittings
Smart Diagnostics
Technology
International Comfort Products FCMA5B60L0DA
Item#:
FCMB4B48L0CA
Manufacturer Item:
FCMB4B48L0CA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Multi-position design for horizontal or vertical installation without
modification.
Standard sloped drain pans and cleanable insulation treated with an
immobilized anti-microbial agent to inhibit the growth of bacteria and
fungi on the insulation.
High-static design meets a wider range of applications than competitive
packaged air handler lines.
Ultra Low Leak Economizer accessory provides ventilation air and free
cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
Cooling coils with mechanically bonded fins provide peak heat transfer.
Hot water coil, steam coil, and electric heat accessories are available.
Standard factory-installed thermo-static expansion valves (TXV) with
removable power element on FAX/FAS units.
Die-formed galvanized steel casings provide durability and structural
integrity. Optional paint is available.
Upgraded unit control board with intuitive indoor fan adjustment.
Standard 2-Speed Indoor Fan Motor system.
International Comfort Products FAX091L2AA0AUA
Item#:
FAX120H2AA0AUA
Manufacturer Item:
FAX120H2AA0AUA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features:
Fujitsu Indoor Furnace cased coils and replacement
uncased coils are designed for use with Fujitsu outdoor
units and are available for vertical upflow or downflow,
and horizontal left or horizontal right airflow. When
matched with Fujitsu outdoor units, the coils provide a
nominal capacity range from 18,000 BTU/HR [5.24 kW]
to 60,000 BTU/HR [17.6 kW].
Constructed of aluminum fins bonded to internally
grooved aluminum tubing.
Coils are tested at the factory with an extensive refrigerant leak check.
Coils have copper sweat refrigerant connections.
Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate
drain connections for ease of connection.
Chatleff metering device connections, at inlet and outlet
of TXV or EEV and equalizer connections (TXV only).
Approved for system application with variety of Fujitsu
outdoor units.
Condensate drain pan is constructed of high grade, heat
resistant, corrosion free thermal-set material.
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any
internal components from horizontal left to right.
Unique drain pan design maximizes application flexibility
and condensate removal.
N-Coil design maximizes performance and minimizes
height required at installation.
Coils are AHRI certified for system application with a
variety of Fujitsu outdoor units.
Fujitsu Unitary FCCN4824SYTA
Item#:
FCCN4921SZTA
Manufacturer Item:
FCCN4921SZTA
Manufacturer:
FUJITSU