Evaporator Coil Cased Slab 4 Ton 48K R22/R410A

Features

Rifled copper tubing, enhanced aluminum fins.

Fully insulated cabinets with faced insulation.

Split access doors in front of cabinet for easy service access.
Refrigerant and plumbing connections:

Immersion tested at 500 psi, followed by nitrogen pressurization and factory sealing to ensure optimal system integrity and long-term reliability.

Schrader provided for pressure assurance testing with 3/8 ODS Stem mounted on end of Liquid Line.

Condensate Drains: 3/4 NPT

Liquid line: 3/8 ODS

Suction line: 3/4 ODS on 1-1/2-ton to 3-ton 7/8 on 3-1/2-ton to 5-ton

Aspen CH48A3G-100L-000

Item#:

CH48A3G-100L-000

Manufacturer Item:

CH48A3G-000

Manufacturer:

ASPEN MFG. LLC

Ductless Mini-Split Outdoor 36K BTU 230 VAC

Cost-competitive

Available in 115V and 208/230V

Built-in basepan heater on heat pump units

Auto-restart function

Condenser high-temperature protection

Refrigerant leakage detection

Quiet outdoor operation, as low as 52 dB(A)

Anti-corrosive fin coating

Piping length 82 ~ 164 ft. (25-50 m.)

Cooling operating range 0° ~ 22° F (-17° ~ 50° C)

Heating operating range 0° ~ 86° F (-17° ~ 30° C)

International Comfort Products DLCSRBH36AAK

Item#:

DLCSRBH36AAK

Manufacturer Item:

DLCSRBH36AAK

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

Mini-Splits_Broc

Wireless Intelligent Round Damper 10"

Fujitsu Heating Parts AZVAFDAMPER10R Wireless Intelligent Round Damper 10"

AZVAFDAMPER10R

Item#:

AZVAFDAMPER10R

Manufacturer Item:

AZVAFDAMPER10R

Manufacturer:

FUJITSU

Air Handler Multi-Position 2 Ton 208/230 VAC 3 Speed Motor TXV R22 44" H x 22" D x 15" W

Advance Distributers BCRMA3124-S01 Pre-Painted Galvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 24000 BTU, 2 Ton, 12.5 kw, 208/240 VAC

Rifled copper tubing, patented lance fin design
High efficiency 3-speed motors
Dynamically balanced blowers for quiet, vibration-free operation
Drain pans are molded of corrosion proof engineering polymer
Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
Filter rack with filter - built into every air handler
Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
Fan time delay available as kit or factory installed
Easily converted to counterflow with kit
All coils are individually pressure tested at 450 psi, then pressurized and sealed
6" width x 9" diameter wheel
Constant speed, 3-speed blower motor
Right hand refrigerant and drain connection
Slab number (A3)
0 and 5 kw, hot water standard stripped wire
13-1/2" width x 17" depth supply duct opening
10-1/4" width x 17-1/4" depth return duct opening

,
,

Advance Distributers BCRMA3124-S01

Item#:

BCRMA3124-S01

Manufacturer Item:

BCRMA3124-S01

Manufacturer:

ADVANCED DISTRIBUTOR PRODUCTS

ADP_Broc

Air Handler Multi-Position 1-1/2-2 Ton 120 VAC 3 Speed Motor TXV R22 44" H x 22" D x 15" W

Advance Distributers BCRMA7624-S2N4 Air Handler

Multi-Position 1-1/2-2 Ton 115 VAC 3 Speed Motor TxV R22,
,

Advance Distributers BCRMA7624-S2N4

Item#:

BCRMA7624-S2N4

Manufacturer Item:

BCRMA7624-S2N4

Manufacturer:

ADVANCED DISTRIBUTOR PRODUCTS

ADP_Broc

Air Conditioning Condensing Unit 1-Stage 5 Ton Wire Guarded Condenser Coil

R-410A Refrigerant

High-quality condenser coil with copper tubing and enhanced louvered fin for maximum heat transfer capacity

Top discharge directs hot air away from living area and shrubbery

All units factory run tested

Naltex Hail Guard protects coils from fin damage

Easy access to electrical panels Hinged control panel allows easy access for testing internal components

45-degree service valves for easy hook-up and service

Liquid line filter drier in every unit (factory installed)

Charged for 15 feet of interconnecting tubing

All units ETL, ETLC approved and AHRI listed

Aire-Flo 4AC13B60P

Item#:

4AC13B60P

Manufacturer Item:

4AC13B60P

Manufacturer:

ALLIED AIR ENTERPRISES

4AC13B60P

Air Conditioning Condensing Unit Non-Communicating Composite Base 3 Ton

Features:

New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system for a long lasting professional finish

Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability

Modern cabinet aesthetics increased curb appeal with visually appealing design

Curved louver panels provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice optimizes airflow and reduces unit sound

Rust resistant screws confirmed through 1500-hour salt spray testing

3"-4"-5" service valve space provides a minimum working area of 27-square inches for easier access

15" wide, industry leading corner service access makes repairs easier and faster

External gauge port access allows easy connection of low-loss gauge ports

Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners and fastener-free base allow for faster access to internal components and hassle-free panel removal

Service trays hold fasteners or caps during service calls

QR code provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

Fujitsu FO3616CSJNBA

Item#:

FO3616CSJNBA

Manufacturer Item:

FO3616CSJNBA

Manufacturer:

GENERAL HVAC SOLUTIONS AMERICA

FO16C-Series_Spec

Air Conditioning Condensing Unit Non-Communicating Composite Base 2.5 Ton

Fujitsu FO3016CSJNBA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 2-1/2 Ton

New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
Better coat paint system for a long lasting professional finish.
Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability.
Modern cabinet aesthetics increased curb appeal with visually appealing design.
Covered louver panels provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
Optimized fan orifice optimizes airflow and reduces unit sound.
Rust resistant screws confirmed through 1500-hour salt spray testing.
3"-4"-5" service valve space provides a minimum working area of 27-square"es for easier access.
15" wide, industry leading corner service access makes repairs easier and faster.
External gauge port access allows easy connection of low-loss gauge ports.
Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal.
Service trays hold fasteners or caps during service calls.
QR code provides technical information on demand for faster service calls.
Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.
Fujitsu FO3016CSJNBA

Item#:

FO3016CSJNBA

Manufacturer Item:

FO3016CSJNBA

Manufacturer:

GENERAL HVAC SOLUTIONS AMERICA

FO16C-Series_Spec

Air Conditioning Condensing Unit Non-Communicating Composite Base 2 Ton