STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CA60A2G-23L-00

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CA24A2G-13L-00

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CA60A3G-210L-002

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CA30A2G-13L-00

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CA30A2G-16L-00

APPLICATION VERSATILITY

Standard Upflow without field modification. Downflow applications require field kit, sold separately.

A2L refrigerants require a Refrigerant Detection System (RDS) for compliance.

ETL listed for R22 and 410A. ETL listed for R454B and R32 with Refrigerant Detection System (RDS).

AHRI certifiable with all brands of A/C and heat pump systems. Features

Rifled copper tubing, enhanced aluminum fins.

Heavy duty plastic drain pans on most models.

Embossed galvanized cabinets standard. Fully insulated cabinets with faced insulation. Split access doors in front of cabinet for easy service access.

Aspen CC36A34-175L-189

STANDARD SPECIFICATIONS

Rifled copper tubing, enhanced aluminum fins.

Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

Left- or right-hand refrigerant and plumbing connections.

Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.

Externally mounted flowrater body with Schrader valve for hiss-testing.

Heavy duty plastic drain pans on most models.

Upflow without field modification. Downflow applications require plate kit, included.

AHRI certifiable with all brands of A/C and heat pump systems.

ETL listed for use with both R-22 and R-410a when proper metering device is used.

Ten-year limited warranty.

Aspen CA60A24-230L-000

APPLICATION VERSATILITY

Standard Upflow without field modification. Downflow applications require field kit, sold separately.

A2L refrigerants require a Refrigerant Detection System (RDS) for compliance.

ETL listed for R22 and 410A. ETL listed for R454B and R32 with Refrigerant Detection System (RDS).

AHRI certifiable with all brands of A/C and heat pump systems. Features

Rifled copper tubing, enhanced aluminum fins.

Heavy duty plastic drain pans on most models.

Embossed galvanized cabinets standard. Fully insulated cabinets with faced insulation. Split access doors in front of cabinet for easy service access.

Aspen CC36A34-210L-189

The PEAQ is a Multi-Voltage Air Handler by Cooper & Hunter is the most recent revolutionary HVAC solution designed to elevate your home climate control experience. Utilizing the new R454B refrigerant, this slim indoor unit matches most gas furnaces, making it an ideal replacement for your existing system. The PEAQ unit is a single-zone, high-performance air conditioner that offers both horizontal and vertical installation options for maximum flexibility. Its adaptive multi-voltage capability (115V & 208-230V) automatically identifies the required voltage without manual conversion, eliminating the hassle of rewiring. With a SEER2 rating of up to 19, the 18K PEAQ unit ensures exceptional energy efficiency. The innovative M-COIL design delivers less than 0.02 in. W.C. pressure drop, providing a mere 2% airflow difference between evaporators. Constructed with TU1 copper tubes, this unit boasts excellent electrical and thermal conductivity, along with superior corrosion and cold resistance. The symmetric fan blower design ensures even airflow and higher efficiency heat exchange. For added comfort, an auxiliary heater can be purchased separately, available in 5kW, 10kW, 15kW, and 20kW models. Additional features include refrigerant leak sensors, a factory-installed drain pan heater to prevent ice accumulation, and an ultra-efficient discharge fan that guarantees uniform heat exchange and prevents frost on the compressor's coils. A detachable delay fuse protects the wire set from outdoor to indoor, preventing overcurrent and ensuring safety. Control Options include: Built-in Smart Kit with Downloadable C&H App, included Remote Control and Wall Thermostat.

Overview

Copper&Hunter is a precision-engineered part built to deliver reliable performance and exceptional durability across a wide range of demanding applications. Manufactured to exact technical standards, this series ensures seamless compatibility, optimal efficiency, and a long operational lifespan for your equipment or project builds.

Whether you are performing routine maintenance, replacing a worn component, or executing a custom installation, this professional-grade part offers the quality required to keep your systems running smoothly. Key Features

Precision Engineering: Built to exact manufacturing specifications for a perfect, secure fit and reliable system integration.

Heavy-Duty Construction: Fabricated from high-quality materials designed to withstand rigorous operational environments and long-term wear.

Optimized Efficiency: Engineered to maintain peak performance and maximize the operational life of your equipment.

Direct Replacement: Streamlines the installation process, minimizing downtime during service or system upgrades.

APPLICATION VERSATILITY

Standard Upflow without field modification. Downflow applications require field kit, sold separately.

A2L refrigerants require a Refrigerant Detection System (RDS) for compliance.

ETL listed for R22 and 410A. ETL listed for R454B and R32 with Refrigerant Detection System (RDS).

AHRI certifiable with all brands of A/C and heat pump systems. Features

Rifled copper tubing, enhanced aluminum fins.

Heavy duty plastic drain pans on most models.

Embossed galvanized cabinets standard. Fully insulated cabinets with faced insulation. Split access doors in front of cabinet for easy service access.

Aspen CC42A34-175L-189

Cooper&Hunters 48K BTU, 230V Single-Zone Outdoor Unit is a powerful and efficient option designed to meet the heating and cooling demands of both large residential and light commercial spaces. By leveraging advanced inverter technology, the unit optimizes compressor activity to precisely match the heating or cooling requirements of the environment. This approach significantly boosts energy efficiency while maintaining consistent performance and delivering substantial savings on operational costs. A forward-thinking feature of this model is its utilization of R454B refrigerant, a greener alternative with a lower Global Warming Potential (GWP) than traditional refrigerants. This eco-friendly choice underscores Cooper&Hunters commitment to sustainability and reduced environmental impact. Durably constructed to withstand a wide range of weather conditions, the 48K BTU unit ensures years of dependable operation. Its SEER2 rating of up to 19.8 highlights its impressive energy-saving capabilities. Quiet performance combined with robust functionality makes this unit a versatile and reliable solution for diverse climate control needs, ideal for residential and commercial applications alike.