|◀ ◀ 1465 - 1476 of 1572 ▶ ▶|
View:

Air Conditioning Condensing Unit 17 SEER 4 Ton ECM Motor

  • Small Footprint - Minimum footprint for easier handling, transportation, and installation.
  • Easier Installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Select indoor matches with factory-mounted TXVs are available for quicker system installation. The factory installed filter-drier and factory charge for a 15-Ft lineset means less time spent brazing and charging the system. The small base dimension and reduced unit clearances make for easier retrofits.
  • Accessible Information - QR code on unit provides quick access to technical documents and warranty information.
  • Durable Finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galva- nized steel chassis components resist corrosion and rust creep. Titanium colored powdercoat paint further protects external panels.
  • Quality Coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system pro- viding reliable performance and small unit size.
  • Rugged Coil Protection - Coils are protected from mechan- ical damage by a proven stamped steel coil guard design.
  • Protected Compressor - Compressors are protected inter- nally by a high pressure relief valve and a temperature sen- sor, and externally by the system high pressure switch. The liquid line filter-drier is factory installed to protect the com- pressor against moisture and debris.
  • Reliable Operation - Ball bearing fan motors provide supe- rior performance in extreme temperatures.
  • Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero oz.one depletion.
  • Top Discharge - Warm air is blown up, away from the struc- ture and any landscaping and allows compact location on multi-unit applications.
  • Low Operating Sound Levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 76 dBA or lower. Compatible accessories for further sound reduction are also available.
  • Better Service Access - Diagonal base valves with open access for low-loss fittings, single panel access to the electri- cal controls, swing out control box for full corner access, and removable fan guard allow easy access for unit mainte- nance.
  • Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program

    TC7B4821S

    • Item#:
    TC7B4821S
    Manufacturer Item:
    TC7B4821S
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    TC7B4821S
    TC7B4821S_Spec

    Air Conditioning Condensing Unit High Efficiency 4 Ton

    REFRIGERATION CIRCUIT
  • Variable speed compressor operates at 5 stages with capacity range from as wide as 25  100%
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor
  • Coil temperature sensor
  • Copper tube/aluminum fin coil PERFORMANCE
  • Up to 13.0 EER
  • Integrated inverter control enables 5stage operation with complete Observer communicating system including Observer control
  • Observer Wall Control with version 5.0 or newer software required
  • Also capable of 2stage operation with 2stage thermostat
  • Selfconfiguring installation with Observer Communicating Wall Control
  • Compact ECM fan motor driven by integrated inverter control
  • Outdoor temperature sensor factory installed
  • Highperformance compressor sound shield standard
  • Isolation compressor grommets
  • Enhanced dehumidification EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • External high and low refrigerant service ports
  • Factory charged with R410A refrigerant
  • Adjustments for min and max staging with Observer Wall Control BUILT TO LAST
  • High gloss, bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    TVA949GKA

    • Item#:
    TVA949GKA
    Manufacturer Item:
    TVA949GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TVA9-ICP-Care_Misc
    TVA9-ICP_Broc
    TVA9-ICP_Install
    TVA9-ICP_Spec

    Air Conditioning Condensing Unit High Efficiency 5 Ton 16 SEER

    REFRIGERATION CIRCUIT
  • Copeland Scroll® compressors on all models
  • Filterdrier supplied with every unit for field installation
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil PERFORMANCE
  • Communicating, selfconfiguring operation when used with Observer Wall Control (TSTAT0201CW)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • High gloss, bakedon powder coat finish over galv. steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
    • Item#:
    TSA660GK
    Manufacturer Item:
    TSA660GKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TSA6-ICP-Parts_Misc
    TSA6-ICP_Install
    TSA6-ICP_Spec

    Air Conditioning Condensing Unit High Efficiency 4 Ton

    REFRIGERATION CIRCUIT
  • Variable speed compressor operates at 5 stages with capacity range from as wide as 25  100%
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor
  • Coil temperature sensor
  • Copper tube/aluminum fin coil PERFORMANCE
  • Up to 13.0 EER
  • Integrated inverter control enables 5stage operation with complete Observer communicating system including Observer control
  • Observer Wall Control with version 5.0 or newer software required
  • Also capable of 2stage operation with 2stage thermostat
  • Selfconfiguring installation with Observer Communicating Wall Control
  • Compact ECM fan motor driven by integrated inverter control
  • Outdoor temperature sensor factory installed
  • Highperformance compressor sound shield standard
  • Isolation compressor grommets
  • Enhanced dehumidification EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • External high and low refrigerant service ports
  • Factory charged with R410A refrigerant
  • Adjustments for min and max staging with Observer Wall Control BUILT TO LAST
  • High gloss, bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    TVA948GKA

    • Item#:
    TVA948GKA
    Manufacturer Item:
    TVA948GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TVA9-ICP-Care_Misc
    TVA9-ICP_Broc
    TVA9-ICP_Install
    TVA9-ICP_Spec

    Air Conditioning Condensing Unit High Efficiency 3 Ton

    REFRIGERATION CIRCUIT
  • Variable speed compressor operates at 5 stages with capacity range from as wide as 25  100%
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor
  • Coil temperature sensor
  • Copper tube/aluminum fin coil PERFORMANCE
  • Up to 13.0 EER
  • Integrated inverter control enables 5stage operation with complete Observer communicating system including Observer control
  • Observer Wall Control with version 5.0 or newer software required
  • Also capable of 2stage operation with 2stage thermostat
  • Selfconfiguring installation with Observer Communicating Wall Control
  • Compact ECM fan motor driven by integrated inverter control
  • Outdoor temperature sensor factory installed
  • Highperformance compressor sound shield standard
  • Isolation compressor grommets
  • Enhanced dehumidification EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • External high and low refrigerant service ports
  • Factory charged with R410A refrigerant
  • Adjustments for min and max staging with Observer Wall Control BUILT TO LAST
  • High gloss, bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products TVA936GKA

    • Item#:
    TVA936GKA
    Manufacturer Item:
    TVA936GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TVA9-ICP-Care_Misc
    TVA9-ICP_Broc
    TVA9-ICP_Install
    TVA9-ICP_Spec

    Air Conditioning Condensing Unit High Efficiency 2 Ton

    REFRIGERATION CIRCUIT
  • Variable speed compressor operates at 5 stages with capacity range from as wide as 25  100%
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor
  • Coil temperature sensor
  • Copper tube/aluminum fin coil PERFORMANCE
  • Up to 13.0 EER
  • Integrated inverter control enables 5stage operation with complete Observer communicating system including Observer control
  • Observer Wall Control with version 5.0 or newer software required
  • Also capable of 2stage operation with 2stage thermostat
  • Selfconfiguring installation with Observer Communicating Wall Control
  • Compact ECM fan motor driven by integrated inverter control
  • Outdoor temperature sensor factory installed
  • Highperformance compressor sound shield standard
  • Isolation compressor grommets
  • Enhanced dehumidification EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • External high and low refrigerant service ports
  • Factory charged with R410A refrigerant
  • Adjustments for min and max staging with Observer Wall Control BUILT TO LAST
  • High gloss, bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    International Comfort Products TVA925GKA

    • Item#:
    TVA925GKA
    Manufacturer Item:
    TVA925GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TVA9-ICP-Care_Misc
    TVA9-ICP_Broc
    TVA9-ICP_Install
    TVA9-ICP_Spec

    Air Conditioning Condensing Unit High Efficiency 2 Ton

    REFRIGERATION CIRCUIT
  • Variable speed compressor operates at 5 stages with capacity range from as wide as 25  100%
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor
  • Coil temperature sensor
  • Copper tube/aluminum fin coil PERFORMANCE
  • Up to 13.0 EER
  • Integrated inverter control enables 5stage operation with complete Observer communicating system including Observer control
  • Observer Wall Control with version 5.0 or newer software required
  • Also capable of 2stage operation with 2stage thermostat
  • Selfconfiguring installation with Observer Communicating Wall Control
  • Compact ECM fan motor driven by integrated inverter control
  • Outdoor temperature sensor factory installed
  • Highperformance compressor sound shield standard
  • Isolation compressor grommets
  • Enhanced dehumidification EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • External high and low refrigerant service ports
  • Factory charged with R410A refrigerant
  • Adjustments for min and max staging with Observer Wall Control BUILT TO LAST
  • High gloss, bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
  • Corner posts for extra strength and style

    TVA924GKA

    • Item#:
    TVA924GKA
    Manufacturer Item:
    TVA924GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TVA9-ICP-Care_Misc
    TVA9-ICP_Broc
    TVA9-ICP_Install
    TVA9-ICP_Spec

    Air Conditioning Condensing Unit 1-Stage 1-1/2 Ton Wire Guarded Condenser Coil

  • R-410A Refrigerant
  • High-quality condenser coil with copper tubing and enhanced louvered fin for maximum heat transfer capacity
  • Top discharge directs hot air away from living area and shrubbery
  • All units factory run tested
  • Naltex Hail Guard protects coils from fin damage
  • Easy access to electrical panels Hinged control panel allows easy access for testing internal components
  • 45-degree service valves for easy hook-up and service
  • Liquid line filter drier in every unit (factory installed)
  • Charged for 15 feet of interconnecting tubing
  • All units ETL, ETLC approved and AHRI listed

    4AC13B18P

    • Item#:
    4AC13B18P
    Manufacturer Item:
    4AC13B18P
    Manufacturer:
    ALLIED AIR ENTERPRISES
     
    4AC13B18P

    Vertical Economizer

    International Comfort Products Fast Parts CRECOMZR020A02 Vertical Economizer,

    CRECOMZR020A02

    Item#:
    CRECOMZR020A02
    Manufacturer Item:
    CRECOMZR020A02
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Air Handler Multi-Position 5 Ton 208/230 1750 CFM R454B 59-3/16" H x 24-11/16" W x 22-1/16" D

  • Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control
  • Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-ozone depleting properties of our previous refrigerant.
  • Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety.
  • Efficiency-optimizing Thermostatic Expansion Valve (TXV)
  • Compatible with two-stage outdoor units
  • Enhanced heat pump heating comfort with higher temperature delivery
  • Corrosion-resistant all-aluminum coil
  • Convenient washable filter
  • Air purifier and dehumidifier compatible
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacteria buildup
    • Item#:
    FCMA5B60L0DA
    Manufacturer Item:
    FCMA5B60L0DA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCMA5B60L0DA_Broc

    Air Handler Multi Position 2 Ton 230/208 VAC R454B 42-11/16" H x 17-5/8" W x 22-1/16" D

  • Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control
  • Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-oz.one depleting properties of our previous refrigerant
  • Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety
  • Efficiency-optimizing Thermostatic Expansion Valve (TXV)
  • Compatible with two-stage outdoor units
  • Enhanced heat pump heating comfort with higher temperature delivery
  • Corrosion-resistant all-aluminum coil
  • Convenient washable filter
  • Air purifier and dehumidifier compatible
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacteria buildup

    INTERNATIONAL COMFORT PRODUCTS FCMA5X24L0BA

    • Item#:
    FCMA5X24L0BA
    Manufacturer Item:
    FCMA5X24L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCMA5X24L0BA_Broc

    Air Handler Multi-Position 4 Ton 208/230 1400 CFM R454B 53-7/16" H x 21-1/8" W x 22-1/16" D

  • Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control
  • Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-ozone depleting properties of our previous refrigerant.
  • Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety.
  • Efficiency-optimizing Thermostatic Expansion Valve (TXV)
  • Compatible with two-stage outdoor units
  • Enhanced heat pump heating comfort with higher temperature delivery
  • Corrosion-resistant all-aluminum coil
  • Convenient washable filter
  • Air purifier and dehumidifier compatible
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacteria buildup
    • Item#:
    FCMA5B48L0CA
    Manufacturer Item:
    FCMA5B48L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCMA5B48L0CA_Broc
    |◀ ◀ 1465 - 1476 of 1572 ▶ ▶|
    View: