Fujitsu FH4821TPSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

48K BTU 4 Ton
• 208/230/1 VAC
• 21" Wide
• Multi-Position,
  
  

  FUJITSU FH4821TTSJSN

REFRIGERATION CIRCUIT

Scroll compressors on all models

Suction line accumulator factory installed

Bi- flow filter- drier included for field installation

Integrated solid state control with Time- Temperature Defrost

Low pressure switch

Round tube / aluminum plate fin coil EASY TO INSTALL AND SERVICE

Easy Access service valves on all models

External high and low refrigerant service ports

Only two screws to access control panel

Factory charged with R- 410A refrigerant BUILT TO LAST

Baked- on powder coat finish over galvanized steel

Post- painted (black) coil fins

Coated, weather- resistant cabinet screws

Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

Quiet performance

Single-stage compressor operation

Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating

Durably built to withstand bad weather and debris

Designed for corrosion resistance and lasting performance

Single-speed fan motor

System protecting high and low-pressure switches and filter drier

Durable, protective inlet grille panels allow easy coil cleaning

Baked-on powder coat finish over Gallonvanized steel

Compatible with humidity sensing thermostats

Suction line accumulator factory installed

Bi-flow filter-drier included for field installation

Integrated solid state control with time-temperature defrost

High and low pressure switches

Copper tube/aluminum fin coil

Easy access service valves

External high and low refrigerant service ports

Only two screws to access control panel

Post-painted (black) coil fins

Coated, weather-resistant cabinet screws

Coated inlet grille with 3/8" spacing for extra protection

Copeland Scroll Ultratecht compressors on all models

Filter- drier supplied with every unit for field installation

External high and low refrigerant service ports

High and low pressure switches

Copper tube / aluminum fin coil

Self- configuring installation capabilities when used with Observes Wall Control

Outdoor temperature sensor factory installed (for use with Observer Wall Control only)

Ball Bearing PSC fan motors on all models

High performance compressor sound shield standard

Isolation compressor grommets

Text based diagnostics with Observer Wall Control

Only 2 control wires required from communicating indoor unit to condenser

Easy access service valves on all models

Innovative control box design

Only two screws to access control panel

Factory charged with R- 410A refrigerant

High gloss, baked- on powder coat finish over Galvanized steel

Post- painted (black) coil fins

Coated, weather- resistant cabinet screws

Coated inlet grille with 3/8 (10mm) spacing for extra protection

Corner posts for extra strength and style

10 year No Hassle Replacementt limited warranty 5 year parts limited warranty (including compressor and coil) With timely registration, an additional 5 year parts limited warranty (including compressor and coil) This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However, proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerant charging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org . * Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details.

TCH624GK

Copeland Scroll compressors on all models

Suction line accumulator factory installed

Biflow filterdrier included for field installation

Integrated solid state control with TimeTemperature Defrost

External high and low refrigerant service ports

Copper tube / aluminum fin coil

Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC)

Outdoor temperature sensor factory installed

Compressor sound blanket standard

Isolation compressor grommets

Text based diagnostics with Observer Communicating Wall Control

Easy access service valves on all models

Innovative control box design

High and low pressure switches

Only two screws to access control panel

Factory charged with R410A refrigerant

High gloss, bakedon powder coat finish over Gallonvanized steel

Postpainted (black) coil fins

Coated, weatherresistant cabinet screws

Coated inlet grille with 3/8 (10mm) spacing for extra protection

Corner posts for extra strength and style

5 year No Hassle Replacement limited warranty

5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC

This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details

Anderson Fittings W47

Copeland Scroll compressors on all models

Suction line accumulator factory installed

Biflow filterdrier included for field installation

Integrated solid state control with TimeTemperature Defrost

External high and low refrigerant service ports

Copper tube / aluminum fin coil

Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC)

Outdoor temperature sensor factory installed

Compressor sound blanket standard

Isolation compressor grommets

Text based diagnostics with Observer Communicating Wall Control

Easy access service valves on all models

Innovative control box design

High and low pressure switches

Only two screws to access control panel

Factory charged with R410A refrigerant

High gloss, bakedon powder coat finish over Gallonvanized steel

Postpainted (black) coil fins

Coated, weatherresistant cabinet screws

Coated inlet grille with 3/8 (10mm) spacing for extra protection

Corner posts for extra strength and style

5 year No Hassle Replacement limited warranty

5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC

This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details

Century Brass W46-3

Copeland Scroll compressors on all models

Suction line accumulator factory installed

Biflow filterdrier included for field installation

Integrated solid state control with TimeTemperature Defrost

External high and low refrigerant service ports

Copper tube / aluminum fin coil

Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC)

Outdoor temperature sensor factory installed

Compressor sound blanket standard

Isolation compressor grommets

Text based diagnostics with Observer Communicating Wall Control

Easy access service valves on all models

Innovative control box design

High and low pressure switches

Only two screws to access control panel

Factory charged with R410A refrigerant

High gloss, bakedon powder coat finish over Gallonvanized steel

Postpainted (black) coil fins

Coated, weatherresistant cabinet screws

Coated inlet grille with 3/8 (10mm) spacing for extra protection

Corner posts for extra strength and style

5 year No Hassle Replacement limited warranty

5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC

This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details

TSH642GKA