Evaporator Coil Uncased Upflow/Downflow W/TXV 5 Ton R410A Aluminum

Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,

Copper tube/aluminum fin"N" coil with latest high - tech fin design
Bolt on TXV metering device factory installed on all models
(2) condensate drain connections
5 years limited parts warranty
Sweat refrigerant line connection
All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
Aluminum hairpin
Sales digit (major revision)

Item#:

END4X61L24

Manufacturer Item:

END4X61L24A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

ENA4X-END4X_Spec

Evaporator Coil Cased N Coil 3 Ton W/TXV Standard Efficiency

Features

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

FCC3621THA

Item#:

FCC3621THA

Manufacturer Item:

FCC3621THA

Manufacturer:

FUJITSU

FCC-COIL_Spec

Evaporator Coil Cased N Coil 5 Ton W/TXV Standard Efficiency

Features

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC6021TSA

Item#:

FCC6021TSA

Manufacturer Item:

FCC6021TSA

Manufacturer:

FUJITSU

FCC-COIL_Spec

Air Conditioning Condensing Unit 1-Stage 5 Ton Wire Guarded Condenser Coil

R-410A Refrigerant

High-quality condenser coil with copper tubing and enhanced louvered fin for maximum heat transfer capacity

Top discharge directs hot air away from living area and shrubbery

All units factory run tested

Naltex® Hail Guard protects coils from fin damage

Easy access to electrical panels

Hinged control panel allows easy access for testing internal components

45-degree service valves for easy hook-up and service

Liquid line filter drier in every unit (factory installed)

Charged for 15 feet of interconnecting tubing

All units ETL, ETLC approved and AHRI listed

4AC13B60P

Item#:

4AC13B60P

Manufacturer Item:

4AC13B60P

Manufacturer:

ALLIED AIR ENTERPRISES

4AC13B60P

Air Conditioning Condensing Unit Non-Communicating Composite Base 3 Ton

New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system for a long lasting professional finish

Scroll compressor uses 70% fewer moving parts for higher efficiency and increased reliability

Modern cabinet aesthetics increased curb appeal with visually appealing design

Louver panels provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice optimizes airflow and reduces unit sound

Rust resistant screws confirmed through 1500-hour salt spray testing

3"-4"-5" service valve space provides a minimum working area of 27-square inches for easier access

15" wide, industry leading corner service access makes repairs easier and faster.

External gauge port access allows easy connection of low-loss gauge ports

Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners allow for faster access to internal components and hassle-free panel removal

Service trays hold fasteners or caps during service calls

QR code provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

FO3616CSJNBA

Item#:

FO3616CSJNBA

Manufacturer Item:

FO3616CSJNBA

Manufacturer:

FUJITSU(MINI-SPLITS)

FO16C-Series_Spec

Air Conditioning Condensing Unit Non-Communicating Composite Base 2.5 Ton