|◀ 409 - 420 of 633 ▶|
View:
Highlights
  • The OH6 is offered with a factory-standard PSC blower motor for reliability and cost savings.
  • It is designed to fit nicely in your low ceiling basement since it is 11 shorter than a typical highboy furnace.
  • Compatible with the new more efficient air conditioners (the new AC evaporator coils are much taller than older coils). This means the lower furnace height makes the installation job less cumbersome for installers and saves on your costs.
  • Features easier servicing due to improved heat exchanger cleanout locations, which also means a savings for you.
  • Utilizes the Thermo Pride 13-gauge copper coated Octatherm heat exchanger.
  • The OH6 is available with a Beckett, Carlin or Riello oil burner.
  • The OH6 provides Annual Fuel Utilization Efficiencies (AFUE) of 86% for Beckett AFG and Carlin EZ-1HP and 86.1% for Riello BF3.
  • With a simple nozzle change to vary the firing rates, your contractor can customize the OH6 to meet the specific needs of your home.

    Thermo Pride OL6FA072T60

  • Item#:
    OL6FA072T60
    Manufacturer Item:
    OL6FA072T60
    Manufacturer:
    THERMO PRODUCTS, LLC
    Thermo Pride OL8RA119T60 Oil Furance Direct Drive 101-132 BTU Output Rear Flue,

    ,

    Thermo Pride OL8RA119T60

    Item#:
    OL8RA119T60
    Manufacturer Item:
    OL8RA119T60
    Manufacturer:
    THERMO PRODUCTS, LLC
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0601412A

  • Item#:
    N92MSN0601412A
    Manufacturer Item:
    N92MSN0601412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 96% AFUE in upflow and horizontal positions up to 95% AFUE in downflow position
  • FixedSpeeds, Constant Torque ECM blower motor
  • Supports singlestage cooling units
  • Insulated heat exchanger compartment
  • Approved for Twinning application (0601714 through 1002120) with accessory (order separately)
  • Approved for Manufactured Housing/Mobile Home applications (0401410 through 1202422) with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

    International Comfort Products N95ESN0801716A

  • Item#:
    N95ESN0801716A
    Manufacturer Item:
    N95ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0401712A

  • Item#:
    N92MSN0401712A
    Manufacturer Item:
    N92MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0601412A

  • Item#:
    N96MSN0601412A
    Manufacturer Item:
    N96MSN0601412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Features:
  • Durable steel extruded louver coil guards provide protection against coil damage.
  • Reliable operation with robust compressor technology proven in our extreme test facility.
  • Long-lasting, powder-coat paint provides a durable, automotive- quality finish that looks great, even after years of outdoor exposure.
  • Quiet, direct-drive design minimizes vibration and sound.
  • Compact cabinet puts advanced performance in less space.

    Thermo Products OT16-125RBP

  • Item#:
    OT16-125RBP
    Manufacturer Item:
    OT16-125RBP
    Manufacturer:
    THERMO PRODUCTS, LLC
    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+

    International Comfort Products N96VSN0401410B

  • Item#:
    N96VSN0401410B
    Manufacturer Item:
    N96VSN0401410B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0401412A

  • Item#:
    N92MSN0401412A
    Manufacturer Item:
    N92MSN0401412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN1002120A

  • Item#:
    N96MSN1002120A
    Manufacturer Item:
    N96MSN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+

    International Comfort Products N96VSN0601412B

  • Item#:
    N96VSN0601412B
    Manufacturer Item:
    N96VSN0601412B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0401712A

  • Item#:
    N96MSN0401712A
    Manufacturer Item:
    N96MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 409 - 420 of 633 ▶|
    View: